TRRTP084 - Pravilnik o pogojih, ki jih mora izpolnjevati kadilnica
Pravilnik o pogojih, ki jih mora izpolnjevati kadilnica
Pravilnik o pogojih, ki jih mora izpolnjevati kadilnica
General Information
Frequently Asked Questions
An EU Regulation is a binding legislative act that must be applied in its entirety across the European Union. Unlike directives, regulations do not need to be transposed into national law and are directly applicable in all member states. Regulations are used when uniform application across all EU countries is essential.
Regulation TRRTP084 covers "Pravilnik o pogojih, ki jih mora izpolnjevati kadilnica". There are 2 standards associated with this regulation.
Harmonized standards under TRRTP084 are European standards (ENs) developed by CEN, CENELEC, or ETSI in response to a mandate from the European Commission. When these standards are cited in the Official Journal of the European Union, products manufactured in conformity with them benefit from a presumption of conformity with the essential requirements of TRRTP084, facilitating CE marking and free movement within the European Economic Area.
This document applies to high efficiency particulate and ultra-low penetration air filters (EPA, HEPA and ULPA) used in the field of ventilation and air conditioning and for technical processes, e.g. for applications in clean room technology or pharmaceutical industry.
It establishes a procedure for the determination of the efficiency on the basis of a particle counting method using a liquid (or alternatively a solid) test aerosol and allows a standardized classification of these filters in terms of their efficiency, both local and integral efficiency.
- Standard20 pagesEnglish languagee-Library read for1 day
This document applies to the design of ventilation and room conditioning systems for non-residential build-ings subject to human occupancy. It focuses on the definitions of the various parameters that are relevant for such systems. Naturally ventilated buildings are outside the scope of this document.
The classification uses different categories. For some values, examples are given and, for requirements, typical ranges with default values are presented. The default values given in this document shall be used where no other values are specified. Classification should always be appropriate to the type of building and its intended use, and the basis of the classification should be explained if the examples given in the standard are not to be used. National regulations must always be followed, even when they are out of the range given in this document.
- Standard52 pagesEnglish languagee-Library read for1 day





