84/450/EEC - Dir. 84/450/EEC
Dir. 84/450/EEC
General Information
Frequently Asked Questions
An EU Directive is a legislative act of the European Union that sets out goals that all EU member states must achieve. However, it is up to each member state to devise their own laws on how to reach these goals through national transposition. Directives are used to harmonize laws across the EU, particularly for the functioning of the single market.
Directive 84/450/EEC covers "Dir. 84/450/EEC". There are 4 standards associated with this directive.
Harmonized standards under 84/450/EEC are European standards (ENs) developed by CEN, CENELEC, or ETSI in response to a mandate from the European Commission. When these standards are cited in the Official Journal of the European Union, products manufactured in conformity with them benefit from a presumption of conformity with the essential requirements of 84/450/EEC, facilitating CE marking and free movement within the European Economic Area.
2010-10-11 EMA: // final draft provided to ISO/CS according to notification received in dataservice on 2010-10-07.
2008-11-17 SJ: Created following ISO discrepency list 2008-10-23.
- Amendment11 pagesEnglish languagee-Library read for1 day
This International Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - oxygen-enriched air; - air for driving surgical tools; - nitrogen for driving surgical tools; - vacuum. It is intended in particular to ensure gas-specificity and to prevent cross-connection between systems conveying different gases. These hose assemblies are intended for use at maximum operating pressures of less than 1 400 kPa. This International Standard specifies the allocation of (NIST), (DISS), (SIS) connectors to medical gases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors.
- Standard25 pagesEnglish languagee-Library read for1 day
2008-11-17 SJ: Created following ISO discrepency list 2008-10-23.
- Amendment11 pagesEnglish languagee-Library read for1 day
This International Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - oxygen-enriched air; - air for driving surgical tools; - nitrogen for driving surgical tools; - vacuum. It is intended in particular to ensure gas-specificity and to prevent cross-connection between systems conveying different gases. These hose assemblies are intended for use at maximum operating pressures of less than 1 400 kPa. This International Standard specifies the allocation of (NIST), (DISS), (SIS) connectors to medical gases and specifies the dimensions of non-interchangeable screw-threaded (NIST) connectors.
- Standard25 pagesEnglish languagee-Library read for1 day