TP201 - Pravilnik o emisiji hrupa strojev, ki se uporabljajo na prostem

ISO 9001:2015 specifies requirements for a quality management system when an organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and
b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.
All the requirements of ISO 9001:2015 are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.

This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by
reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise
emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on
a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote
site their noise contribution is not to be included in this part of ISO 8528.
The essential noise emission characteristic value is the sound power level.
The results of measurement taken in accordance with this part of ISO 8528 are classified as either accuracy grade
2 or grade 3 depending on which acoustic measurement conditions are complied with. Accuracy grade 2 (i. e.,
engineering method in accordance with ISO 3744) requires the measuring area to be a substantially acoustic-free
field over a reflecting plane (with an environmental correction K2A < 2 dB) and with negligible background noise
level (background noise correction K1A < 1,3 dB). Accuracy grade 3 (i. e. survey method in accordance with
ISO 3746) requires the environmental correction K2A to be less or equal than 7 dB, and the background noise
correction K1A to be less or equal than 3 dB.
For the operation of a generating set under steady conditions this part of ISO 8528 allows for the calculation of the
A-weighted sound power level as well as appropriate octave or one third octave sound power level for the
appropriate accuracy grade.
This part of ISO 8528 applies to RIC engine driven AC generating sets for fixed and mobile applications with rigid or
flexible mountings. It is applicable for land and marine use, excluding generating sets used on aircraft or to propel
land vehicles and locomotives.
NOTE 1 This part of ISO 8528 has been developed for RIC engine driven AC generating sets, but it can also be applied to RIC
engine driven DC generating sets.
NOTE 2 For some specific applications (e. g. essential hospital supplies, high rise buildings, etc.) supplementary requirements
may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis.
NOTE 3 True comparisons can only be made between generating sets when the measurement are classified in the same
accuracy grade.

Applies to coal pick shanks, chisel shanks, rivet snap shanks (parallel or tapered), breaker and spade shanks, concrete breaker shanks and rock drill shanks. These types relate to the machine for which they are mainly designed, but this does not prevent the use of the shanks for other applications. ISO 1180 does not apply to pneumatic hammer and their chuck bushings but those features of chuck bushings (dimensions and tolerances) which ensure interchangeability are specified.

Describes, together with basic noise emission International Standards, the mechanical and acoustical specifications necessary for a reproducible test method for the airborne noise emitted by woodworking machines. Specifies standard operating conditions and microphone positions for the measurement on 19 types of woodworking machines. The existence of special-purpose machines, for which such standard operating conditions cannot be specified, is acknowledged. Additional types will be covered in future editions.

(1) This European Standard applies to concrete for structures cast in situ, precast structures, and structural precast products for buildings and civil engineering structures.
(2) The concrete under this European Standard can be:
-   normal-weight, heavy-weight and light-weight;
-   mixed on site, ready-mixed or produced in a plant for precast concrete products;
-   compacted or self-compacting to retain no appreciable amount of entrapped air other than entrained air.
(3) This standard specifies requirements for:
-   the constituents of concrete;
-   the properties of fresh and hardened concrete and their verification;
-   the limitations for concrete composition;
-   the specification of concrete;
-   the delivery of fresh concrete;
-   the production control procedures;
-   the conformity criteria and evaluation of conformity.
(4) Other European Standards for specific products e.g. precast products or for processes within the field of the scope of this standard may require or permit deviations.
(5) Additional or different requirements may be given for specific applications in other European Standards, for example:
-   concrete to be used in roads and other trafficked areas (e.g. concrete pavements according to EN 13877–1);
-   special technologies (e.g. sprayed concrete according to EN 14487).
(6) Supplementing requirements or different testing procedures may be specified for specific types of concrete and applications, for example:
-   concrete for massive structures (e.g. dams);
-   dry mixed concrete;
-   concrete with a Dmax of 4 mm or less (mortar);
-   self-compacting concretes (SCC) containing lightweight or heavy-weight aggregates or fibres;
-   concrete with open structure (e. g. pervious concrete for drainage).
(7) This standard does not apply to:
-   aerated concrete;
-   foamed concrete;
-   concrete with density less than 800 kg/m3;
-   refractory concrete.
(8) This standard does not cover health and safety requirements for the protection of workers during production and delivery of concrete.

Specifies methods for measuring the sound pressure levels at prescribed microphone positions in the proximity of the machine under test. Defines acoustical requirements for measurements. Annex A is for information only.

Establishes methods for the determination and verification of sound power levels of manually portable hand-held brush-cutters and grass-trimmers with internal combustion engines which are carried out under standardized conditions. These units are primarily used in forestry.

This European Standard specifies mechanical safety requirements and testing for design and construction of electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s) of non-metallic filament line or freely pivoting non-metallic cutter(s) with a kinetic energy of not more than 10 J each, and used by a standing operator primarily for cutting grass.  This standards is not applicable to:  a) scissor type or lawn trimmers and lawn edge trimmers with cutting means other than those described above;  b) self-propelled lawn trimmers or lawn edge trimmers;  c) lawn trimmers or lawn edge trimmers which do not have a distance of at least 600 mm between the cutting means control and the cutting head.  The electrical aspects of electrically powered lawn trimmers and lawn edge trimmers are not covered by this standard.  The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.  Environmental aspects have not been considered in this standard.  This European Standard applies primarily to machines which are manufactured after the date of issue of this standard.  Note: The method of calculating the kinetic energy for the purposes of this standard is given in Annex B.

Describes a method for the determination of the sound power level of manually portable hand-held chain-saws with an internal combustion engine which is carried out under standardized conditions. These chain-saws are primarily used in forestry.

This International Standard specifies a method for measuring the sound pressure levels on a measurement surface enveloping a noise source, in order to calculate the sound power level produced by the noise source.  It gives requirements for the test environment and instrumentation, as well as techniques for obtaining the surface sound pressure level from which the sound power level of the source is calculated, leading to results which have a grade 3 accuracy.  It is important that specific noise test codes for various types of equipment be established and used in accordance with this International Standard. For each type of equipment, such noise test codes will give detailed requirements on mounting, loading and operating conditions for the equipment under test as well as a selection of the measurement surface and the microphone array as specified in this International Standard.  Note: The noise test code for a particular type of equipment should give detailed information on the particular surface that is selected, as the use of differently shaped measurement surfaces may yield differing estimates of the sound power level of a source.

This International Standard specifies a method for measuring the sound pressure levels on a measurement surface enveloping a noise source, under essentially free-field conditions near one or more reflecting planes, in order to calculate the sound power level produced by the noise source.  It gives requirements for the test environment and instrumentation, as well as techniques for obtaining the surface sound pressure level from which the sound power level of the source is calculated, leading to results which have a grade 2 accuracy.  It is important that specific noise test codes for various types of equipment be established and used in accordance with this International Standard. For each type of equipment, such noise test codes will give detailed requirements on mounting, loading and operating conditions for the equipment under test as well as a selection of the measurement surface and the microphone array as specified in this International Standard.  Note: The noise test code for a particular type of equipment should give detailed information on the particular surface that is selected, as the use of differently shaped measurement surfaces may yield differing estimates of the sound power level of a source.

Describes a method for determining the noise emission in terms of the A-weigthed sound power level. Is applicable to excavators (hydraulic or rope-operated), tractors with dozer equipment, loaders, and backhoe loaders.

The general term "Drill Rig" covers several differing types of machines for use in the construction industry, water well drilling industry, mining and quarrying, for use above ground as well as underground and tunnel construction.  The differing tasks determine the choice of drilling method and type of machine.  For this reason there are many possible ways to seperate drill rigs into different groups, e.g. in accordance with: - the task; - the drilling method used; - the cutting removal method...

Defines various classifications for the applications, ratings and performance which arise out of the combination of generating sets consisting of an RIC engine, a.c.generator, controlgear, switchgear and auxiliary equipment. Applies to a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings, etc.) supplementary requirements may be necessary.

This part of EN 500 specifies the safety requirements for compaction machines as defined in clause 3 and deals with the significant hazards pertinent to compaction machines, when used as intended and in conditions foreseen by the manufacturer.

This Part of the EN 840            specifies dimensions and requirements of mobile waste containers with 2 wheels, with capacity from 80 l to 390 l to be used by comb lifting device.

ISO 9001:2000 specifies requirements for a quality management system where an organization
needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and
aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements.
All requirements of this International Standard are generic and are intended to be applicable to all organizations, regardless of type, size and product provided.
Where any requirement(s) of this International Standard cannot be applied due to the nature of an organization and its product, this can be considered for exclusion.
Where exclusions are made, claims of conformity to this International Standard are not acceptable unless these exclusions are limited to requirements within clause 7, and such exclusions do not affect the organization's ability, or responsibility, to provide product that meets customer and applicable regulatory requirements.