ISS EIT.NZG - Household apliances

2019-03-19: to contact PM before proceeding with any assessment request.

EN-IEC 60730-2-22  applies to the partial evaluation of thermal motor protectors asdefined in IEC 60730-1 for household and similar use, including heating, air conditioning andsimilar applications as well as for sealed (hermetic and semi-hermetic type) motorcompressors.NOTE A thermal motor protector is considered an integrated control since its protective functionality isdependent on the correct mounting and fixing in or on a motor and which can only be fully tested in combinationwith the releva...view more

IEC 60730-2-14:2017 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This International Standard is applicable to controls for building automation within the scope of ISO 16484. This part 2-14 also applies to automatic electrical controls for equipment that may be used by the public, such as equipment intended to be used in sh...view more

IEC 60730-2-12:2015(E) applies to electrically operated door locks for use in, on or in association with equipment, including equipment for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard also applies to electrically operated door locks for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial...view more

This part of IEC 60730 applies to automatic electrical air flow, water flow and water level
sensing controls for use in, or in association with, boilers with a maximum pressure rating of
2 000 kPA (20 bar) and equipment for general household and similar use including controls
for heating, air-conditioning and similar applications.
NOTE Examples are water flow and water level sensing controls of the float or electrode-sensor type used in
boiler applications and air flow, water flow and water...view more

2018-12-12: D161/C021: make available the standard without offering it for citation.
2018-09-17: following plenary meeting, TC agrees to publish without any link to LVD, EMC. CLC/BT approval needed. To use PR=63458 for providing Annexes and Common Modifications, which are not ready yet.
included CM (63458)
2017-10-03 - Cannot allocate for publication due to missing assessment from Consultant.

2018-12-12: D161/C021: make available the standard without offering it for citation.
2018-09-17: following plenary meeting, TC decision to publish the mother standard and this amendment without links to LVD, EMC. CLC/BT approval needed before publication. A11 to be created to address harmonization.
20180308: publication on hold until mother standard is published

2018-12-12: D161/C021: make available the standard without offering it for citation.
2018-09-17: following plenary meeting, CLC/TC 72 agreed to publish the project without Annex ZZ. No need for Common Modifications anymore. CLC/BT to approve the publication without link to EMC and LVD.  
2017-05-03: D156/C084 - Ratified standards not being made available.
2016-10-27: Publication on the hold (Common modifications needed + ZZ)

Standard applies to automatic electrical temperature sensing controls for use in, on or in association with equipment, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard is applicable to automatic electrical temperature sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also ...view more

This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on
or in association with equipment, including controls for heating, air-conditioning and similar
applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc.
or a combination thereof.
NOTE Throughout this standard, the word "equipment" includes "appliance" and "control system".
This International Standard is applicable to automatic electrical humidity sensing co...view more

IEC corrigendum

In general, this part of IEC 60730 applies to automatic electrical controls for use in, on, or in
association with equipment for household and similar use. The equipment may use electricity,
gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof.
NOTE 1 Throughout this standard the word "equipment" means "appliance and equipment."
EXAMPLE 1 Controls for appliances within the scope of IEC 60335.
This International Standard is applicable to controls for building automation...view more

This part of IEC 60730 applies to automatic electrical pressure sensing controls with a
minimum gauge pressure rating of –60 kPa and a maximum gauge pressure rating of
4,2 MPa, for use in, on or in association with, equipment. The equipment may use electricity,
gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.
NOTE Throughout this standard, the word “equipment” includes “appliances” and “control system”.
This standard is also applicable to individual pressure sensin...view more

This part of IEC 60730 applies to automatic electrical burner control systems for the automatic
control of burners for oil, gas, coal or other combustibles for household and similar use
including heating, air conditioning and similar use.
This part 2-5 is applicable to a complete burner control system and to a separate
programming unit. This part 2-5 is also applicable to a separate electronic high-voltage
ignition source and to a separate flame detector.
NOTE Separate ignition devices (el...view more

IEC 60703-1:2010 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. This standard also applies to the inherent safety; to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the...view more

In general, this part of IEC 60730 applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outlets. This standard does not apply to time-delay...view more

This part of IEC 60730 applies to automatic electrical temperature sensing controls for use in, on or in association with equipment for household and similar use, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof.

In general, this part of IEC 60730 applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or timers which are mechanically integral with multifunctional controls having non-electrical outlets. This standard does not apply to time-delay...view more

This Technical Report contains a list  of interpretations related to the EN  60730 series. Interpretations have  grouped according to different  standards. The Technical Report will  be updated annually, if necessary.  Once an interpretation is superseded  by inclusion of suitable wording in the  relevant standard in the EN 60730  series, the interpretation will be  withdrawn from this document.

This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum pressure rating of 2 000 kPA (20 bar) and equipment for general household and similar use including controls for heating, air- conditioning and similar applications.