ISO/TC 4/SC 5/WG 1 - Dimensions and tolerances

This document specifies the boundary dimensions for radial needle roller and cage assemblies. In addition, this document gives the tolerances for the cage width and method of functional gauging of bore diameter of needle roller complement. Informative values for the tolerances of shaft raceway, housing raceway and raceway widths are given in Annex A. Functional gauging of radial needle roller and cage assembly is given in Annex B.

This document specifies the boundary dimensions and tolerances for thrust needle roller and cage assemblies. Furthermore, it recommends dimensions and tolerances for thrust washers, i.e. raceway members, which can be used either as shaft or housing washers. Annex A gives general characteristics for application of thrust needle roller and cage assemblies and thrust washers. Gauging method for thrust needle roller and cage assemblies and thrust washers is given in Annex B.

ISO 1206:2018 specifies the boundary dimensions and normal class tolerance values for needle roller bearings with machined rings. ISO 1206:2018 specifies dimensional and geometrical characteristics, and limit deviations from nominal sizes. These specifications apply to complete needle roller bearings and to bearings without inner ring. Recommended values for the tolerances for shaft raceways for needle roller bearings without inner ring are given in Annex A.