This document provides requirements for demonstrating that the site in question is adequate to provide safe, long-term containment of CO2, for demonstrating that the CO2 flood is operated in a way to assure containment of the CO2 in the EOR complex, and for quantifying associated storage. This document applies to CO2 that is injected in enhanced recovery operations for oil and other hydrocarbons, including natural gas, (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association with the CO2-EOR project is sought. Recognizing that some CO2-EOR projects use non-anthropogenic CO2 in combination with anthropogenic CO2, the document also shows how allocation ratios can be utilized for optional calculations to quantify the portion of associated storage comprised of anthropogenic CO2 (see Annex A). This document does not apply to quantification of CO2 injected into reservoirs where no hydrocarbon production is anticipated or occurring. Storage of CO2 in geologic formations that do not contain hydrocarbons is covered by ISO 27914 even if located above or below hydrocarbon producing reservoirs. If storage of CO2 is conducted in a reservoir from which hydrocarbons were previously produced but will no longer be produced in paying or commercial quantities, such storage would be subject to the requirements of ISO 27914. This document addresses: safe, long-term containment of CO2 within the EOR complex; CO2 leakage from the EOR complex through leakage pathways; and on-site CO2-EOR project loss of CO2 from wells, equipment, or other facilities. This document does not address the following: lifecycle emissions, including but not limited to CO2 emissions from capture or transportation of CO2, on-site emissions from combustion or power generation, and CO2 emissions resulting from the combustion of produced hydrocarbons; storage of CO2 above ground; buffer and seasonal storage of CO2 below ground (similar to natural gas storage); )any technique or product that does not involve injection of CO2 into the subsurface; and emissions of any greenhouse gases (GHGs) other than CO2. NOTE Some authorities can require other GHG components of the CO2 stream to be quantified.

  • Standard
    36 pages
    English language
    sale 15% off

1.1 Applicability This document applies to carbon dioxide (CO2) that is injected in enhanced recovery operations for oil and other hydrocarbons (CO2-EOR) for which quantification of CO2 that is safely stored long-term in association with the CO2-EOR project is sought. Recognizing that some CO2-EOR projects use non-anthropogenic CO2 in combination with anthropogenic CO2, the document also shows how allocation ratios could be utilized for optional calculations of the anthropogenic portion of the associated stored CO2 (see Annex B). 1.2 Non-applicability This document does not apply to quantification of CO2 injected into reservoirs where no hydrocarbon production is anticipated or occurring. Storage of CO2 in geologic formations that do not contain hydrocarbons is covered by ISO 27914 even if located above or below hydrocarbon producing reservoirs. If storage of CO2 is conducted in a reservoir from which hydrocarbons were previously produced but will no longer be produced in paying or commercial quantities, or where the intent of CO2 injection is not to enhance hydrocarbon recovery, such storage would also be subject to the requirements of ISO 27914. 1.3 Standard boundary 1.3.1 Inclusions The conceptual boundary of this document for CO2 stored in association with CO2-EOR includes: a) safe, long-term containment of CO2 within the EOR complex; b) CO2 leakage from the EOR complex through leakage pathways; and c) on-site CO2-EOR project loss of CO2 from wells, equipment or other facilities. 1.3.2 Exclusions This document does not include the following: a) lifecycle emissions, including but not limited to CO2 emissions from capture or transportation of CO2, on-site emissions from combustion or power generation, and CO2 emissions resulting from the combustion of produced hydrocarbons; b) storage of CO2 above ground; c) buffer and seasonal storage of CO2 below ground (similar to natural gas storage); d) any technique or product that does not involve injection of CO2 into the subsurface; and e) emissions of any GHGs other than CO2. NOTE Some authorities might require other GHG components of the CO2 stream to be quantified.

  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off
  • Standard
    59 pages
    French language
    sale 15% off

Frequently Asked Questions

ISO/TC 265/WG 6 is a Working Group within the International Organization for Standardization (ISO). It is named "EOR Issues". This committee has published 2 standards.

ISO/TC 265/WG 6 develops ISO standards in the area of Information technology. Currently, there are 2 published standards from this working group.

The International Organization for Standardization (ISO) is an independent, non-governmental international organization that develops and publishes international standards. Founded in 1947 and headquartered in Geneva, Switzerland, ISO brings together experts from 170+ member countries to share knowledge and develop voluntary, consensus-based standards that support innovation and provide solutions to global challenges.

A Working Group in ISO is a specialized group responsible for developing standards or technical work within a defined scope. These bodies bring together international experts to create consensus-based standards that support global trade, safety, and interoperability.

Loading...