ISO/TC 35/SC 12/WG 3 - Surface preparation methods

This document describes the typical method for acid pickling generally used in a shop facility for the preparation of steel substrates before application of paints and related products. It is in general applicable to new steelwork. This method is essentially intended to remove rust and mill scale. Typically, only slight oil residues can be removed during this process. It can be used on steel surfaces that are easily deformed by abrasive blasting.

This document describes the general principles for the selection of methods for the preparation of steel surfaces before application of paints and related products. It also contains information on features that are taken into account when selecting and specifying certain surface preparation methods and preparation grades.

This document specifies abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It provides information on the effectiveness of the individual methods and their fields of application. It describes the equipment to use and the procedure to follow. NOTE These methods are essentially intended for hot-rolled steel to remove mill scale, rust, etc. but could also be used for cold-rolled steel of sufficient thickness to withstand the deformation caused by the impact of abrasive.