ISO/TC 270 - Plastics and rubber machines
Standardization in the field of machines used for the preparation, processing and recovery of plastics and rubber, including the detailed safety requirements for a particular machine or group of machines. Such requirements are applicable to the design, construction and use of machinery used in the plastics and rubber industry, addressing hazards, hazardous situations and hazardous events. Moreover, the Technical Committee could take into consideration other aspects such as machine classification and measurement of energy consumption.
Machines pour les matières plastiques et le caoutchouc
Normalisation dans le domaine des machines utilisées pour la préparation, la transformation et la récupération des matières plastiques et du caoutchouc, y compris les exigences de sécurité détaillées pour une machine ou un groupe de machines. Ces exigences définissant les dangers, les situations et les phénomènes dangereux sont applicables à la conception et à la construction des machines utilisées dans l'industrie des matières plastiques et du caoutchouc. De plus, ce Comité technique pourra traiter d'autres aspects tels que la classification ou la mesure de la consommation d'énergie.
General Information
This document specifies the essential safety requirements for the design and construction of injection moulding machines for the processing of plastics and/or rubber and provides information for their safe use. This document is applicable only to injection moulding machines with hydraulic and/or electrical drives for platen movement. This document deals with all significant hazards, hazardous situations and events relevant to injection moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) during the life cycle of the machinery (see ISO 12100:2010, 5.4). The following are not covered: — machines on which the clamping unit can only be operated by the physical force of the operator; — machines for which the hydraulic jack can only be manually operated; — injection blow moulding machines; — machines for reaction injection moulding; — compression moulding machines and transfer moulding machines; — direct-on sole moulding machines, unit sole and footwear component moulding machines, full shoe and boot moulding machines; — design of an exhaust system; — design and construction of the mould. NOTE Moulds and exhaust systems are not part of the machinery. This document is not applicable to injection moulding machines which are manufactured before the date of its publication.
- Standard148 pagesEnglish languagesale 15% off
- Standard154 pagesFrench languagesale 15% off