WG 8 - TC 15/WG 8

Contains the requirements for six types of polyethylene film tapes with pressure-sensitive adhesive. Products having thermal indices from 75 to 90 and minimum temperature ratings from -10°C to -33°C.

Contains requirements for 3 types of pressure-sensitive adhesive tapes made with glass fabric. Products having thermal indices from 130 to 180 with rubber thermosetting adhesive, acrylic crosslinked and high temperature silicone adhesives.

Contains requirements for polyester film tapes (nominal thicknesses from 0,020 mm to 0,055 mm) with rubber thermosetting or acrylic crosslinked adhesive.

Contains the requirements for pressure-sensitive adhesive tapes made with cellulosic paper, creped, with rubber thermosetting adhesive.

Contains the requirements for combination tapes made of creped cellulosic paper and polyethylene terphthalate film with rubber thermosetting adhesive.

IEC TS 61439-7:2014-02(en-fr) defines the specific requirements of ASSEMBLIES as follows:
- ASSEMBLIES for which the rated voltage does not exceed 1 000 V in case of a.c. or 1 500 V in case of d.c;
- stationary or movable ASSEMBLIES with enclosure;
- ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment;
- ASSEMBLIES operated by ordinary persons;
- ASSEMBLIES intended to be installed and used in marinas, camping sites, market squares and other similar external public sites or similar sites;
- ASSEMBLIES intended for charging stations for electric vehicles.
This publication is to be read in conjunction with IEC 61439-1:2011

Contains the requirements for polycarbonate film tapes (type 1 - nominal thickness 0,020 mm to 0,030 mm and type 2 - nominal thickness 0,045 mm to 0,055 mm) with acrylic thermoplastic adhesive.

Contains the requirements for polyester film/glass filament combination tapes with pressure-sensitive adhesive. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application, and not based on this specification alone.

Contains the requirements for polypropylene film tapes with a pressure-sensitive adhesive. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Contains the requirements for polyester film/polyester non-woven combinations with rubber thermosetting adhesive.

Contains the requirements for polyester/epoxy combinations with pressure-sensitive adhesive.

Contains the requirements for one type of pressure-sensitive adhesive tape made with cellulose acetate woven fabric with rubber thermosetting adhesive.

Contains requirements for polyester film tapes with rubber thermoplastic adhesive.

Contains requirements for pressure-sensitive adhesive tapes made with cellulosic paper, non-creped, with rubber thermosetting adhesive. Gives also the test method for measuring bond separation during thermal treatment (Flagging test).