CEN/TC 352/WG 3 - Health, safety and environmental aspects

This document sets requirements for sampling and treatment of the complex matrices in order to obtain a liquid dispersion with sufficiently high concentration of the nano-objects of interest.
This document provides guidelines for detection and identification of specific nano-objects in complex matrices, such as liquid environmental compartments, waste water and consumer products (e.g. food, cosmetics). This document requires for the identification a priori knowledge of the nature of the nano-objects like their chemical composition. The selected detection and identification methods are based on a combination of size classification and chemical composition analysis. Identification can also be supported, e.g. by additional morphology characterization. Currently only Field Flow Fractionation, Electron Microscopy and single particle Inductively Coupled Plasma – Mass Spectrometry fulfil this combination condition.

This document provides guidelines for all waste management activities from the manufacturing and processing of manufactured nano-objects.
The guidelines apply to all actors in the waste management chain, namely MNO manufacturers, MNO modifiers, as well as waste disposal companies and carriers and consignees of WMP-MNOs.
This document does not intend to provide guidelines on the management and disposal of nanocomposites, waste derived from consumer products containing nano-objects or waste containing only naturally occurring or incidental nano-objects. Also excluded from the scope are any waste from non-nanoscale materials resulting from the manufacturing and processing of MNOs.

This document provides protocol guidelines for determining explosivity and flammability characteristics of powders containing manufactured nano-objects. These explosivity and flammability characteristics are needed for safety data sheets for safe storage, handling and transport of any powder.
In particular, this document will provide protocol guidelines concerning:
-   the determination of flammability characteristics of powders containing nano-objects with regard to sensitivity to ignition sources;
-   the ability of a powder containing nano-objects to generate an explosive atmosphere and the assessment of its explosion characteristics.
This document is not suitable for use with recognized explosives, such as gunpowder and dynamite, explosives which do not require oxygen for combustion, or substances or mixtures of substances which may under some circumstances behave in a similar manner. Where any doubt exists about the existence of hazard due to explosive properties, it is best to seek expert advice.

This document provides guidelines for application of Life Cycle Assessments (LCA) of specific relevance to manufactured nanomaterials (MNMs), including their use in other products, according to EN ISO 14044:2006. It does not cover incidental nanomaterials.