CEN/TC 249/SC 6 - Thermoplastic films, foils and sheets

This document specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials.
The minimum sheet width is 600 mm.
The main applications of these sheets are in building and agriculture (greenhouses).

This document specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I) without fillers and reinforcing materials.
This document applies only to thickness 0,25 mm to 20,0 . It also applies to PS-I sheet in roll form.

This standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I1) without fillers and reinforcing materials. This standard applies only to thickness 0,25 mm to 20,0 mm in accordance with clause 3. This standard also applies to PS-I sheet in roll form.

This standard specifies the requirements and test methods for solid flat extruded sheets of polyethylene - homopolymers (PE-HD) without filler and reinforcing material. This standard applies only to thickness 0.5 mm to 40 mm. This standard also applies to PE - HD sheet in rolled form.

Specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials. The minimum sheet width is 600 mm.

Specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. Applies specifically to sheets made of poly-(p,p'-isopropylidenediphenyl carbonate). The sheets may be coloured or colourless, and they may be transparent, translucent or opaque. The sheets may also have a special weather-protective layer on one or both surfaces. Applies only to thicknesses equal to or greater than 1,5 mm.

This standard specifies the requirements and test methods for solid flat extruded sheets of polypropylene-homopolymers (PP-H) and polypropylene- copolymers (PP-B and PP-R) without filler and reinforcing material. This standard applies only to thickness 0.5 mm to 40 mm. This standard also applies to PP sheet in rolled form.