CEN/TC 227/WG 6 - Dangerous substances
WG 6, doing liaison work only, has another type of work programme being frequently updated. WG 6 has the following general plan of action (in brief): - make an inventory of materials within the scope of CEN/TC 227 but planned to be standardized by other CEN/TCs; - select the CEN/TCs to be contacted by WG 6 (the rest to be contacted by other working groups of CEN/TC 227); - initiate formal liaison, collect information (drafts, standards) and make an assessment that it meets the requirements of CEN/TC 227; - recommend additional requirements to be approved by CEN/TC 227 and forwarded to the relevant liaison TC as a proposal.
Dangerous substances
WG 6, doing liaison work only, has another type of work programme being frequently updated. WG 6 has the following general plan of action (in brief): - make an inventory of materials within the scope of CEN/TC 227 but planned to be standardized by other CEN/TCs; - select the CEN/TCs to be contacted by WG 6 (the rest to be contacted by other working groups of CEN/TC 227); - initiate formal liaison, collect information (drafts, standards) and make an assessment that it meets the requirements of CEN/TC 227; - recommend additional requirements to be approved by CEN/TC 227 and forwarded to the relevant liaison TC as a proposal.
General Information
This document provides core product category rules for type III environmental declaration of bituminous materials for building and civil engineering according to EN 13108-1, EN 13108-2, EN 13108-3, EN 13108-4, EN 13108-5, EN 13108-6, EN 13108-7, EN 13108-9, and prEN 13108-31. The approach taken for these PCR may be considered applicable and adaptable for other bitumen based products.
This document defines the parameters to be reported, what EPD types (and life cycle stages) to be covered, what rules to be followed in order to generate Life Cycle Inventories (LCI) and conduct Life Cycle Impact Assessment (LCIA) and the data quality to be used in the development of EPDs.
In addition to the common parts of EN 15804, this document for bituminous materials:
- defines the system boundaries;
- defines the modelling and assessment of material-specific characteristics;
- defines allocation procedures for multi-output processes along the production chain;
- includes the rules for calculating the LCI and the LCIA underlying the EPD;
- provides guidance for the determination of the reference service life (RSL);
- gives guidance on the establishment of default scenarios.
Principles used:
- PCR covering bituminous materials;
- from cradle to beyond the building life cycle based on EN 15804;
- polluter pays: processes of waste processing shall be assigned to the product system that generates the waste until the end-of-waste state is reached;
- EPD will be based on declared units (e.g. tonnes of material) and not functional units (e.g. km of road);
- abiotic depletion potential of aggregate should be declared when relevant;
- all use of inert material in the quarry: reclamation, sound and dust protection have to be included in stages A1 to A3 of the EPD;
- data quality will be described (e.g. Average yearly value, average 10 years value, or maximum value ever encountered).
NOTE The Use stage, Informative Module B, depends on the use scenario and this depends on the type of road it is used for, the width of the road, the width of the lane, the total pavement structure and substrate for which the pavement layer it is used, the climate conditions, the maximum and minimum pavement temperatures, the traffic intensity and the number of weights of the axle loadings, etc. The use scenario details are determined by the buyer / user of the bituminous mixture. Therefore, only examples on typical maintenance scenarios are given.
This guideline provides PCRs that can be applied for a particular asphalt mixture, from a specific asphalt plant with a specific production temperature. Hence, the design of the asphalt mixture is necessary to produce the specific EPD.
- Draft42 pagesEnglish languagesale 10% offe-Library read for1 day