SIST EN 60745-2-1:2003/A1:2009

SLOVENSKI STANDARD
SIST EN 60745-2-1:2003/A1:2009
01-september-2009
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DYUWDOQLNHLQXGDUQH
YLEUDFLMVNHYUWDOQLNH,(&$
Hand-held motor-operated electric tools - Safety -- Part 2-1: Particular requirements for
drills and impact drills
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-1: Besondere
Anforderungen für Bohrmaschinen und Schlagbohrmaschinen
Outils électroportatifs à moteurs - Sécurité -- Partie 2-1: Règles particulières pour les
perceuses
Ta slovenski standard je istoveten z: EN 60745-2-1:2003/A1:2009
ICS:
25.080.40 Vrtalniki Drilling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-1:2003/A1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-1:2003/A1:2009

---------------------- Page: 2 ----------------------

SIST EN 60745-2-1:2003/A1:2009


EUROPEAN STANDARD
EN 60745-2-1/A1

NORME EUROPÉENNE
May 2009
EUROPÄISCHE NORM

ICS 25.140.20; 25.140.30
English version


Hand-held motor-operated electric tools -
Safety -
Part 2-1: Particular requirements for drills and impact drills
(IEC 60745-2-1:2003/A1:2008)


Outils électroportatifs à moteurs - Handgeführte motorbetriebene

Sécurité - Elektrowerkzeuge -
Partie 2-1: Règles particulières Sicherheit -
pour les perceuses Teil 2-1: Besondere Anforderungen
(CEI 60745-2-1:2003/A1:2008) für Bohrmaschinen und
Schlagbohrmaschinen
(IEC 60745-2-1:2003/A1:2008)





This amendment A1 modifies the European Standard EN 60745-2-1:2003; it was approved by CENELEC on
2009-04-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-1:2003/A1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-1:2003/A1:2009
EN 60745-2-1:2003/A1:2009 - 2 -
Foreword
The text of document 61F/731/FDIS future amendment 1 to IEC 60745-2-1:2003, prepared by SC 61F
(transformed into TC 116, Safety of hand-held motor-operated electric tools), was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60745-2-1:2003
on 2009-04-22.
With this amendment, this Part 2 is established on the basis of EN 60745-1:2006.
Main changes include editorial modifications to match with EN 60745-1:2006 and the addition of a new
safety warning to Clause 8: Marking and instructions.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2010-02-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2012-05-01
__________
Endorsement notice
The text of amendment 1:2008 to the International Standard IEC 60745-2-1:2003 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60745-2-1:2003/A1:2009
IEC 60745-2-1
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-1: Particular requirements for drills and impact drills

Outils électroportatifs à moteur – Sécurité –
Partie 2-1: Règles particulières pour perceuses et perceuses à percussion

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 25.140.20; 25.140.30 ISBN 2-8318-9800-5

---------------------- Page: 5 ----------------------

SIST EN 60745-2-1:2003/A1:2009
– 2 – 60745-2-1 Amend. 1 © IEC:2008
FOREWORD
This amendment has been prepared by subcommittee 61F: Safety of hand-held motor-operated
electric tools, of IEC technical committee 61: Safety of household and similar electrical
appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61F/731/FDIS 61F/751/RVD

Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
With this amendment, this Part 2 is established on the basis of the fourth edition (2006) of
IEC 60745-1, Hand-held motor-operated electric tools – Safety – Part 1: General requirements.
Main changes include editorial modifications to match with the fourth edition of IEC 60745-1
and the addition of a new safety warning to Clause 8: Marking and instructions.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the s
...