iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 300 394-1 V2.3.1:2003

(Main)

Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio

Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio

Maintenance of the conformance testing for radio aspects to incorporate DMO requirements, and RF loopback.

Prizemni snopovni radio (TETRA) – Specifikacija za preskušanje skladnosti – 1. del: Radio

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.070.10 - Terrestrial Trunked Radio (TETRA)
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Ref Project
ETSI EN 300 394-1 V2.3.1 (2001-04) - Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio
SIST EN 300 394-1 V2.3.1:2003SIST EN 300 394-1 V2.3.1:2003
PreviousNext
Standard
SIST EN 300 394-1 V2.3.1:2003
English language
117 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prizemni snopovni radio (TETRA) – Specifikacija za preskušanje skladnosti – 1. del: RadioTerrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 300 394-1 Version 2.3.1SIST EN 300 394-1 V2.3.1:2003en01-december-2003SIST EN 300 394-1 V2.3.1:2003SLOVENSKI
STANDARD
ETSIEN300394-1V2.3.1(2001-04)EuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part1:RadioSIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)2ReferenceREN/TETRA-02054KeywordsTETRAETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)3ContentsIntellectualPropertyRights.9Foreword.91Scope.102References.103Definitions,symbolsandabbreviations.113.1Definitions.113.2Symbols.113.3Abbreviations.124General.124.1Presentationofequipmentfortestingpurposes.124.1.1Facilitiesandinformationrequiredfortesting.124.1.2Choiceofradiofrequencychannelstobetested.134.1.3Interpretationofthemeasurementresults.134.2Mechanicalandelectricaldesign.134.2.1General.134.2.2Controls.144.2.3Marking.145Radiotestconfiguration,testsignalsandtestmodes.145.1Generalfunctionalradiotestconfiguration.145.2Radiotestmodes.155.2.1Testreceivemode.155.2.1.1MStestreceivemode.155.2.1.2BStestreceivemode.155.2.2Testtransmitmode.165.2.2.1MSV+Dtesting.165.2.2.2MSPDOtesting.175.2.2.3BSV+D&PDOtesting.175.3Radiotestsignals.175.3.1General.175.3.2TestsignalT1(TETRAwantedsignal).185.3.2.1MSV+Dtesting.185.3.2.2BSV+Dtesting.195.3.2.3MSPDOtesting.195.3.2.4BSPDOtesting.205.3.3TestsignalT2(TETRAinterferer).205.3.4TestsignalT3(unmodulatedinterferer).206Testconditions.206.1General.206.2Powersourcesandambientconditions.206.2.1Normaltestconditions.206.2.2Extremetestconditions.216.3Procedurefortestsatextremetemperatures.226.3.1Equipmentdesignedforcontinuousoperation.226.3.2Equipmentdesignedforintermittentoperation.227Technicalcharacteristics.237.1Transmitterparameterdefinitions&limits.237.1.1Transmitteroutputpower.237.1.1.1Definition.237.1.1.2Limitvalues.237.1.2Unwantedoutputpowerinnon-activetransmitstate.237.1.2.1Definition.237.1.2.2Limitvalues.23SIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)47.1.3Adjacentchannelpowerduetomodulation.247.1.3.1Definition.247.1.3.2Limitvalues.247.1.4Adjacentchannelpowerduetoswitchingtransients.247.1.4.1Definition.247.1.4.2Limitvalues.257.1.5Unwantedemissionsfarfromthecarrier.257.1.5.1Definition.257.1.5.2Limitvalues.257.1.6Unwantedradiatedemissions.267.1.6.1Definition.267.1.6.2Limitvalues.267.1.7UnwantedemissionsduringtheBLCH/CLCH(linearization).267.1.7.1Definition.267.1.7.2Limitvalues.267.1.8Transmitterintermodulationattenuation.267.1.8.1Definition.267.1.8.2Limitvalues.277.1.8.2.1MSLimitvalues.277.1.8.2.2LimitvaluesforsingleBStransmitter.277.1.8.2.3LimitvaluesforIntraBSintermodulation.277.2Receiverparameterdefinitionsandlimits.277.2.1General.277.2.2Nominalerrorrates.287.2.2.1Definition.287.2.2.2Limitvalues.287.2.3Referencesensitivityperformance.287.2.3.1Definition.287.2.3.2Limitvalues.287.2.4Referenceinterferenceperformance.297.2.4.1Definition.297.2.4.2Limitvalues.297.2.5Blockingcharacteristics.297.2.5.1Definition.297.2.5.2Limitvalues.307.2.6Spuriousresponserejection.307.2.6.1Definition.307.2.6.2Limitvalues.307.2.7Intermodulationresponserejection.307.2.7.1Definition.307.2.7.2Limitvalues.307.2.8Unwantedconductedemissions.317.2.8.1Definition.317.2.8.2Limitvalues.317.2.9Unwantedradiatedemissions.317.2.9.1Definition.317.2.9.2Limitvalues.317.3Transmitter/receiverparameterdefinitions&limits.317.3.1Modulationaccuracy.317.3.1.1Definition.317.3.1.2Limitvalues.317.3.2Carrierfrequencyaccuracy.317.3.2.1Definition.317.3.2.2Limitvalues.327.3.3MSreceiverperformanceforsynchronizationburstacquisition.327.3.3.1Definition.327.3.3.2Limitvalues.327.3.4MSFramealignmentperformance.327.3.4.1Definition.327.3.4.2Limitvalues.327.3.5MSlinkcontrol.337.3.5.1Definition.33SIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)57.3.5.2Limitvalues.338Methodsofmeasurementfortransmitterparameters.348.1Transmitteroutputpower.348.1.1MStransmitteroutputpower.348.1.2BStransmitteroutputpower.358.2Unwantedoutputpowerinnonactivetransmitstate.358.3Adjacentchannelpowerduetomodulation.358.4Adjacentchannelpowerduetoswitchingtransients.368.5Unwantedemissionsfarfromthecarrier.368.6Unwantedradiatedemissions.378.7UnwantedemissionsduringtheBLCH/CLCH(linearization).378.7.1MSunwantedemissionsduringtheCLCH(linearization).378.7.2BSunwantedemissionsduringtheBLCH(linearization).388.8Transmitterintermodulationattenuation.388.8.1MSTransmitterintermodulationattenuation.388.8.2BSTransmitterintermodulationattenuation.388.8.3IntraBStransmitterintermodulationattenuation.389Methodsofmeasurementforreceiverparameters.399.1General.399.2Nominalerrorrates.399.2.1MSnominalerrorrate.399.2.2BSnominalerrorrate.399.3Referencesensitivityperformance.399.3.1MSreferencesensitivityperformance.409.3.2BSreferencesensitivityperformance.409.3.3PUEMperformance.409.4Referenceinterferenceperformance.419.4.1MSreferenceinterferenceperformance.419.4.2BSreferenceinterferenceperformance.419.5Blockingcharacteristics.419.5.1MSblocking.429.5.2BSblocking.429.6Spuriousresponserejection.429.7Intermodulationresponserejection.429.7.1MSintermodulationresponserejection.429.7.2BSintermodulationresponserejection.439.8Unwantedemissions.439.9Unwantedradiatedemissions.4310Methodsofmeasurementfortransmitter/receiverparameters.4410.1Modulationaccuracy.4410.1.1MSmodulationaccuracy.4410.1.2BSmodulationaccuracy.4410.1.3Vectorerrormagnitudeatsymboltime.4410.2Carrierfrequencyaccuracy.4510.2.1MScarrierfrequencyaccuracy.4510.2.2BScarrierfrequencyaccuracy.4510.3MSreceiverperformanceforsynchronizationburstacquisition.4610.4MSFramealignmentperformance.4610.5MSlinkcontrol.4711Measurementuncertainty.4811.1Transmitter.4811.2Receiver.5111.3Transmitter/receiverparameterdefinitions&limits.5311.4Interpretationofmeasurementresults.53SIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)6AnnexA(normative):TETRAreceivertesting.54A.1Frequenciesofspuriousresponse.54A.2TestcasesandtestconditionsforBSandMSreceivers.55A.3TestsignalT1,contentofBSCHandBNCH/T(V+D)&MBCH/T(PDO).60AnnexB(normative):Radiotestsystemfunctions.62B.1Testtransmitterandreceiver.62B.1.1General.62B.1.2Samplingsystem.62B.1.2.1General.62B.1.2.2TETRAfilter.62B.1.2.3Adjacentchannelpowermeasurements.63B.1.2.4Modulationaccuracymeasurements.63B.1.2.5Measurementofunwantedoutputpowerinthenon-activetransmitstate.63B.1.3Spectrumanalyser.63B.1.4Errorratetester.63B.1.5Testsignalrequirements.64B.1.5.1OnchanneltestsignalT1.64B.1.5.2InterferingtestsignalT2.64B.1.5.3InterferingtestsignalT3.64B.1.6Propagationsimulators.65B.1.7Timingmeasurementunit.65B.1.8Passivetestsystemcomponents.65B.1.9Testsystemcontroller.65AnnexC(normative):TETRATestConnectorInterface(TTCI).66C.1General.66C.2Formalaspects.66C.3TTCI,layer1.67C.3.1MechanicalandElectricalCharacteristics.67C.3.2TransmissionandReceptionCharacteristics.67C.4TTCI,Layer2.68C.4.1GeneralStructure.68C.4.2FrameStructure.68C.4.3FlowofI-framesonLayer2.68C.4.3.1TransmissionofFrames.68C.4.3.2Receptionofframes.69C.4.3.3ParametersonLayer2.69C.5TTCI,Layer3.69C.5.1Messagestructure.69C.5.2DefinitionsoftheMessages.70C.5.2.1DATO.70C.5.2.1.1Testequipmenterrorhandling.71C.5.2.2Bi-directionaloperationoftheTTCI.71C.5.2.3Codecconformancetesting.72C.5.2.4STindicator.72C.6ControlofMS/BS.72C.6.1ManualinterventionofMS/BS.72C.6.2Bi-directionaloperationofthetestinterface.73C.6.3MScontrolledbyT1.73C.7Characteristicsoftheinterface.73C.7.1Mechanicalcharacteristicsoftheinterface.73C.7.2Electriccharacteristicsoftheinterface.73SIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)7C.8CodecconformancetestingusingtheTTCI.74C.8.1CodecconformancetestmethodologyusingtheTTCI.74AnnexD(normative):RFTestFacilityusingRFLoopBack.75D.1IntroductiontotheTETRATest(TT)protocolforRFloopbacktest.77D.1.1Outlinerequirements.77D.1.2TestModes.77D.1.3Switchingforloopbacktestmode.78D.2TETRATestEntity.79D.3TETRARFloopbacktestprotocol.80D.3.1SettingtheTETRAMSintoTETRATestmode.80D.3.2TETRATESTprotocol.80D.3.2.1ConfirmingthatTETRATESTMODEisset.80D.3.2.2OperatingTETRAloopback.81D.3.2.3EndingTETRATestmode.82D.3.3Badframeindication.82D.3.4Channelsrequiredtobeloopedback.82D.3.5TETRAloopbacktestscenarios.83D.4TETRATest(TT)PDUdescriptions.83D.4.1TTPDUdescriptiontablesdownlink.83D.4.1.1D-LOOPCOMMAND.83D.4.1.2D-OPENLOOPCOMMAND.84D.4.1.3D-TESTMODECONFIRMCOMMAND.84D.4.1.4D-TESTMODEENDCOMMAND.84D.4.2TTPDUdescriptiontablesuplink.85D.4.2.1U-LOOPCONFIRM.85D.4.2.2U-OPENLOOPCONFIRM.85D.4.2.3U-TESTMODECONFIRM.85D.4.2.4U-TESTMODEENDCONFIRM.86D.4.3Informationelementscoding.86D.4.3.1Loopbacktype.86D.4.3.2Confirm.87D.4.3.3MSpowerclass.87D.4.3.4PDU.87D.4.3.5Receiverclass.88D.5TTuseofMLE,LLCandMAC.88D.6MessagesequencechartsandoperationofTETRAloopback.88D.7IntroductiontotheT1TestModeforRFloopbacktest.89D.7.1Outlinerequirements.89D.7.2T1TestModes.89D.7.3Switchingforloopbacktestmode.90D.8TETRARFloopbackT1testmode.91D.8.1SettingTETRAequipmentintoT1testmode.91D.8.2T1loopbacktestmodeoperation.91D.8.3Logicalchannelstobeloopedback.92D.8.4Returnchannelforlogicalchannelloopback.92D.8.4.1Type1:TCH/7,2+AACH.93D.8.4.2Type2:SCH/F+AACH.93D.8.4.3Type3:BSCH+SCH/HD+AACH.93D.8.4.4Type4:TCH/2,4N=1+AACH.94D.8.4.5Type7:TCH/7,2(uplink).94D.8.4.6Type8:SCH/F(uplink).94D.8.4.7Type9:STCH+STCH(uplink).94D.8.4.8Type10:TCH/2,4N=1(uplink).95D.8.4.9Type11:SCH/HU+SCH/HU.95D.8.4.10Type15:TCH/S+TCH/S+AACH.95D.8.4.11Type16:TCH/S+TCH/S(uplink).95SIST EN 300 394-1 V2.3.1:2003

ETSIETSIEN300394-1V2.3.1(2001-04)8D.8.4.12Type17:TCH/4,8N=1+AACH.96D.8.4.13Type18:TCH/4,8N=1(uplink).96D.8.4.14Type19:TCH/Sspeechcodectest(downlink).96D.8.4.15Type20:TCH/Sspeechcodectest(uplink).97D.8.5Loopbacktestscenarios.97D.9DirectModeOperation(DMO).98D.9.1DO-MS.98D.9.2DU-MS.98D.9.3DW-MS.99D.9.4DM-REP.99D.9.5DM-GATE.99D.9.6DM-REP/GATE.99D.9.7DMOsummary.99AnnexE(informative):UsingRFloopbacktotestaTETRAMS.100E.1Introduction.100E.2ExpectedmodeofoperationfortestingaMS.101E.3RecognitionofTETRATestmodebyMS.104E.4Usingloopbacktotesttrafficchannels.105E.4.1TCH/7,2.107E.4.2TCH/S.108E.4.3TCH/2,4,N=8.108E.4.4Controlmessagesduringloop
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN 300 392-12-6 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 6: Call Authorized by Dispatcher (CAD)
ETSI EN 300 392-12-6 V1.3.1 (2006-02)

The present document defines the stage 3 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked RAdio (TETRA) as provided by European operators. Stage 3 defines the signalling system protocols needed to implement the service described in stage 1 and stage 2. The stage 1 and stage 2 aspects are detailed in EN 300 392 10-6 [2] and EN 300 392-11-6 [3] respectively. Aspects relating to all supplementary services are detailed in EN 300392-9 [6]. Charging principles and the Man-Machine Interface (MMI) are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 394-1 V2.4.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio
ETSI EN 300 394-1 V2.4.1 (2006-02)

The present document specifies the minimum technical characteristics of TETRA Voice plus Data (V+D) Base Stations (BS) and Mobile Station (MS) equipment, and TETRA Direct Mode Operation (DMO) equipment, and the radio test methods used for type testing. Specific test methods for DMO equipment are defined in annex F of the present document. The purpose of these specifications is to provide a sufficient quality of radio transmission and reception for equipment operating in a TETRA system and to minimize harmful interference to other equipment. The present document is applicable to TETRA systems operating at radio frequencies in the range of 300 MHz to 1 GHz.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 040 V2.1.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface
ETSI EN 301 040 V2.1.1 (2006-03)

The present document describes the data content of a Lawful Interception interface in a TETRA system. It provides the requirements and specification of the interface within a TETRA system for the purpose of providing data to Law Enforcement Agencies (LEAs) in the area of Lawful Interception (LI) of communications. The present document describes the internal LI interface of a TETRA network, and does not specify the means by which data is delivered to the LEA or to its designated Law Enforcement Monitoring Facility (LEMF). However the internal LI interface is defined in such a way that data may be carried transparently on most networks.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-1 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 1: Call Identification (CI)
ETSI EN 300 392-12-1 V1.2.1 (2004-01)

The present document specifies the stage 3 description of the Supplementary Services CLIP, CLIR and COLP all part of Call Identification for the Terrestrial Trunked Radio (TETRA). The term "Line" is used in the present document to design either the line of a "LS" Line Station or by extension the TETRA Air Interface.
NOTE 1: In order to use the same name for supplementary services as ECMA.
Calling Line Identification Presentation (SS-CLIP) is a supplementary service which is offered to the called user and which provides the calling user identity. Connected Line Identification Presentation (SS-COLP) is a supplementary service which is offered to the calling user and which provides the connected user identity.
Calling/connected Line Identification Restriction (SS-CLIR) is a supplementary service offered to a user to restrict presentation of that user's identity to another user.
Man-Machine Interface and charging principles are outside the scope of the present document. The supplementary service stage 3 description is preceded by the stage 1 and the stage 2 description of the service, according to the method described in ITU-T Recommendation I.130 [1]. The stage 1 description specifies the service from the user's point of view. The stage 2 description identifies the functional capabilities of each SS and the information flows needed to support the supplementary service as specified in its stage 1 description. The present stage 3 description specifies the protocols at the air interface and at the various Inter-System Interfaces (ISI) to support each Supplementary Service.
NOTE 2: According to ITU-T Recommendation I.130 [1], the stage 3 description of any telecommunication service addresses the network implementation aspects. Consequently it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. The latter have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description.
The present document is applicable to Voice plus Data individual call or group call; the present document is neither applicable to Packet Mode of Operation nor to DMO; more specifically to the following entities:
- the MS/LS of either the calling user or the connected user during an individual call or a group call;
- the originating Switching and Management Infrastructure (SwMI) in an individual call or a group call;
- the group controlling SwMI and the participating SwMI for a group call;
- the terminating SwMI in an individual call;
- the interworking SwMI for either an individual call or a group call.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-11-1 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 11: Supplementary services stage 2; Sub-part 1: Call Identification (CI)
ETSI EN 300 392-11-1 V1.2.1 (2004-01)

The present document specifies the stage 2 description of the Supplementary Services CLIP, CLIR and COLP all part of Call Identification for the Terrestrial Trunked Radio (TETRA). The term "Line" is used in the present document by extension to the air interface and to keep those supplementary service names at the Air Interface in TETRA Radio based network. Calling Line Identification Presentation (SS-CLIP) is a supplementary service which is offered to the connected user and which provides either the calling user's identity (ITSI for TETRA) in case of individual call or the calling user identity (GTSI is presented as part of the normal group call set-up) in case of group call. COnnected Line Identification Presentation (SS-COLP) is a supplementary service which is offered to the calling user and which provides the connected user's identity (connected ITSI for individual call, connected GTSI for a group call). Calling/Connected Line Identification Restriction (SS-CLIR) is a supplementary service offered to a user to restrict presentation of that user's ITSI to another user. The generic term SS-CLIR covers in fact two different supplementary services: SS-CLIR (Calling Line Identity Restriction) and SS-COLR (COnnected Line identity Restriction). Contrary to ECMA-148 [9] and in line with public ISDN, the two services have been split in the present document to improve its readability.
Man-Machine Interface and charging principles are outside the present document. Supplementary service specifications are produced in three stage according to the method defined in ITU-T Recommendation I.130 [1]. The stage 2 description identifies the functional capabilities and the information flows needed to support the supplementary service as specified in its stage 1 description (see EN 300 392-10-1 [7]). The stage 2 description is followed by the stage 3 description (see EN 300 392-12-1 [8], which specifies the protocols at the air interface and at the various Inter-System Interfaces (ISI) to support the service. The present document is applicable to MS and SwMIs involved in the operation of those supplementary services. Specifications of interworking gateways to non-TETRA networks (mainly PSTN and ISDN) are outside the scope of the present document.
The stage 2 descriptions for the SS-CLIP, SS-CLIR and SS-COLP are derived from ECMA-148 [9] taken as normative
reference for the corresponding supplementary services for Private Integrated Services Networks (PISNs).
NOTE: The stage 2 description is followed by the stage 3 description, which specifies the encoding rules for the information flows and process behaviour for the different entities in SwMI and MS.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 396-6 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Direct Mode Operation (DMO); Part 6: Security
ETSI EN 300 396-6 V1.2.0 (2004-03)

The present document defines the Terrestrial Trunked Radio system (TETRA) Direct Mode of operation. It specifies the basic Air Interface (AI), the interworking between Direct Mode Groups via Repeaters and interworking with the TETRA Trunked system via Gateways. It also specifies the security aspects in TETRA Direct Mode and the intrinsic services that are supported in addition to the basic bearer and teleservices. This part describes the security mechanisms in TETRA Direct Mode. It provides mechanisms for confidentiality of control signalling and user speech and data at the AI. It also provided some implicit authentication as a member of a group by knowledge of a shared secret encryption key. The use of AI encryption gives both confidentiality protection against eavesdropping, and some implicit authentication.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 395-4 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Speech codec for full-rate traffic channel; Part 4: Codec conformance testing
ETSI EN 300 395-4 V1.3.1 (2005-06)

The objective of the present document is to define the conformance bounds for the TETRA speech and channel codec as deployed in the TETRA Speech Traffic Channel (TCH/S) channel type used in the TETRA Voice plus Data (V+D) equipment. For the speech part of the TCH/S codec, the conformance testing (clause 7 of the present document) consists of a bit-exact test where the reference is pre-computed and fixed. For the TCH/S channel encoding a bit exact conformance test is also defined (see clause 6.4). For the TCH/S channel decoding, a non-bit exact test is employed with the specifications designed such that a sufficient quality of performance is met by the TETRA equipment (see clause 6.3).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-9 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services
ETSI EN 300 392-9 V1.3.1 (2004-11)

The present document defines principles and requirements generally applicable to the stage 2 and 3 descriptions of supplementary services for the Terrestrial Trunked Radio (TETRA). The present document is applicable to any TETRA terminal equipment (Mobile Station (MS) or Line Station (LS) and to any TETRA network (Switching and Management Infrastructure - SwMI) which support at least one TETRA Supplementary Service (SS). In addition, its routeing requirements of supplementary service information are applicable to any TETRA network with a Voice plus Data (V+D) Inter-System Interface (ISI) to another TETRA network which supports at least one TETRA SS.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-12-22 V1.3.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 22: Dynamic Group Number Assignment (DGNA)
ETSI EN 300 392-12-22 V1.3.1 (2005-04)

The present document defines the stage 3 specifications of the Supplementary Service Dynamic Group Number Assignment (SS-DGNA) for the Terrestrial Trunked Radio (TETRA). The SS-DGNA enables a user to dynamically define group identities and group related parameters to the TETRA system and to the subscribers in the system. These definitions are used to enable group call invocations to dynamically defined groups. The SS-DGNA specification defines the creation, modification, deletion and interrogation of group definitions in the Switching and Management Infrastructure (SwMI), in the Mobile Station (MS). The present document does not include the specification for access priority used for random access in uplink and call priority used by SwMI for resource allocation in a group call. Access priority and call priority can be specified and applied for groups using Supplementary Services Access Priority (SS-AP), Priority Call (SS-PC) and Pre-emptive Priority Call (SS-PPC). Thus, the definition procedure of these priorities is outside the scope of the present document. Man-Machine Interface (MMI) and charging principles are also outside the scope of the present document. Supplementary service stage 3 specification is preceded by the stage 1 and the stage 2 specifications of the service. Stage 1 describes the functional capabilities from the user's point of view. Stage 2 defines the functional behaviour in terms of functional entities and information flows. Stage 3 gives the precise description of the supplementary service from the implementation point of view. It defines the protocols for the service and the encoding rules for the information flows. It defines the processes for the functional entities and their behaviour. The described protocols and their behaviour apply for the SwMI and for the MS and can be applied over the Inter-System Interface (ISI) between TETRA systems.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-11-6 V1.2.1:2006(Main)
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 11: Supplementary services stage 2; Sub-part 6: Call Authorized by Dispatcher (CAD)
ETSI EN 300 392-11-6 V1.2.1 (2004-01)

The present document defines the stage 2 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked Radio (TETRA) as provided by European operators. Stage 2 identifies the functional entities involved in the supplementary service and the information flows between them. Stage 2 is part of three stage definition where stage 1 (EN 300 392-10-6 [1]) specifies the service description and the procedures of the supplementary service and stage 3 specifies the service primitives, PDUs and protocols for functional entities. NOTE: The stage 2 description is followed by the stage 3 description EN 300 392-12-6 [2], which specifies the encoding rules for the information flows and process behaviour for the different entities in the SwMI, in the MS and in the LS. Aspects relating to all supplementary services are detailed in EN 300 392-9 [7]. Man-Machine Interface (MMI) and charging principles are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day