SIST EN 10219-1:1998
(Main)Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements
This part of this European Standard specifies the technical delivery requirements for cold formed welded structural hollow sections of circular, square or rectangular form and applies to structural hollow sections formed cold without subsequent heat treatment. The specified requirements apply to non-alloy quality steel, fine grain non-alloy quality steel and fine grain alloy special steels as defined in EN 10020. The grades, chemical composition and mechanical properties for the non-alloy quality steels are given in annex A. The grades, chemical composition and mechanical properties for the fine grain non-alloy quality and alloy special steels are given in annex B. The products specified in this part of this European Standard are intended for use in construction. NOTE1: A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions. The grades and mechanical properties of the finished hollow sections are compatible with those in EN 10025 and EN 10113 and some of those in EN 10149. Requirements for tolerances, dimensions and sectional properties are contained in Part 2 of this European Standard (EN 10219-2). This European standard does not apply to products covered by the following European Standards: EN 10025 Hot-rolled products of non-alloy structural steels: Technical delivery conditions EN 10113 Hot-rolled products in weldable fine grain structural steels EN 10149 Hot-rolled flat products made of high yield strength steels for cold forming EN 10155 Structural steels with improved atmospheric corrosion resistance: Technical delivery conditions. EN 10210 Hot finished structural hollow sections of non-alloy and fine grain structural steels EN 10225 Weldable structural steels for fixed offshore structures
Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 1: Technische Lieferbedingungen
Dieser Teil dieser Europäischen Norm legt die technischen Lieferbedingungen für geschweißte Hohlprofile für den Stahlbau mit kreisförmigem, quadratischem oder rechteckigem Querschnitt fest und gilt für Hohlprofile, die ohne nachfolgende Wärmebehandlung kalt geformt werden. Die festgelegten Anforderungen gelten für unlegierte Qualitätsstähle, feinkörnige unlegierte Qualitätsstähle und feinkörnige legierte Edelstähle nach den Definitionen in EN 10020.
Profils creux pour la construction formés a froid en aciers de construction non alliés et a grains fins - Partie 1: Conditions techniques de livraison
La présente partie de la norme européenne spécifie les conidtions techniques de livraison des profils creux formés circulaire, carrée ou rectangulaire. Elle s'applique aux profils creux formés a froid sans traitement thermique ultérieur.Les prescriptions spécifiées sont applicables aux aciers de qualité non alliés, aux aciers a grains fins de qualité non alliés ainsi qu'aux aciers spéciaux a grains fins alliés tels qu'ils sont définis dans l'EN 10020.
Hladno oblikovani varjeni votli konstrukcijski profili iz nelegiranih in drobnozrnatih jekel - 1. del: Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kaltgefertigte geschweißte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 1: Technische LieferbedingungenProfils creux pour la construction formés a froid en aciers de construction non alliés et a grains fins - Partie 1: Conditions techniques de livraisonCold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10219-1:1997SIST EN 10219-1:1998en01-avgust-1998SIST EN 10219-1:1998SLOVENSKI
STANDARD
SIST EN 10219-1:1998
SIST EN 10219-1:1998
SIST EN 10219-1:1998
SIST EN 10219-1:1998
SIST EN 10219-1:1998
SIST EN 10
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.