SIST EN 15301-1:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Surfaces for sports areas - Part 1: Determination of rotational resistancePodloge za športne dejavnosti – 1. del: Ugotavljanje odpornosti proti vrtenjuSols sportifs - Partie 1 : Détermination de la résistance en rotationSportböden - Teil 1: Bestimmung des DrehwiderstandesTa slovenski standard je istoveten z:EN 15301-1:2007SIST EN 15301-1:2007en97.220.10Športni objektiSports facilitiesICS:SLOVENSKI
STANDARDSIST EN 15301-1:200701-junij-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15301-1March 2007ICS 97.220.10 English VersionSurfaces for sports areas - Part 1: Determination of rotationalresistanceSols sportifs - Partie 1 : Détermination de la résistance enrotationSportböden - Teil 1: Bestimmung des DrehwiderstandesThis European Standard was approved by CEN on 10 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15301-1:2007: E



EN 15301-1:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative References.4 3 Principle.4 4 Apparatus.4 5 Test pieces.8 6 Conditioning.9 7 Procedure.9 8 Calculation and expression of results.9 9 Test report.9 Bibliography.10



EN 15301-1:2007 (E) 3 Foreword This document (EN 15301-1:2007) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 15301-1:2007 (E) 4
1 Scope This part of EN 15301 specifies methods for determining the rotational resistance of sports surfaces.
2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12229, Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces 3 Principle The force required to initiate rotational movement of a test sole in contact with the sports surface being tested is measured. 4 Apparatus 4.1 The apparatus shall consist of the following components (see Figure 1).  Te
...