Specification for flexible insulating sleeving -- Part 3: Specification requirements for individual types of sleeving -- Sheets 121 and 122: Extruded silicone sleeving

This standard gives requirements for two types of non-heat-shrinkable sleeving extruded from silicone elastomer and distinguished principally by volatile content - These sleevings are normally available in bore sizes up to 25 mm and in a range of wall thicknesses between 0.1 mm and 2.0 mm - National standards may select a restricted list of preferred combinations of bore diameter and wall thickness - These sleevings are normally available in the following opaque colours: black - blue - brown - grey - green - orange - pink - red - violet - white - yellow and green/yellow - It is also available in colourless translucent form

Bestimmung für Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen -- Blätter 121 und 122: Extrudierte Siliconschläuche

Spécification pour gaines isolantes souples -- Partie 3: Spécifications particulières aux types particuliers de gaines -- Feuilles 121 et 122: Gaines en silicone extrudé

Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 121 to 122: Extruded silicone sleeving (IEC 60684-3-121 and 122:1988)

General Information

Status
Withdrawn
Publication Date
31-May-1998
Withdrawal Date
31-May-1998
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-1998
Due Date
01-Jun-1998
Completion Date
01-Jun-1998

Relations

Buy Standard

Standardization document
HD 523.3.121 TO 122 S1:1998
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 523.3.121 TO 122 S1:1998
01-junij-1998
Specification for flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheets 121 to 122: Extruded silicone sleeving
(IEC 60684-3-121 and 122:1988)
Specification for flexible insulating sleeving -- Part 3: Specification requirements for
individual types of sleeving -- Sheets 121 and 122: Extruded silicone sleeving
Bestimmung für Isolierschläuche -- Teil 3: Bestimmungen für einzelne Schlauchtypen --
Blätter 121 und 122: Extrudierte Siliconschläuche
Spécification pour gaines isolantes souples -- Partie 3: Spécifications particulières aux
types particuliers de gaines -- Feuilles 121 et 122: Gaines en silicone extrudé
Ta slovenski standard je istoveten z: HD 523.3.121 & 122 S1:1990
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST HD 523.3.121 TO 122 S1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.