SIST EN ISO 18862:2020
(Main)Coffee and coffee products - Determination of acrylamide - Methods using HPLC-MS/MS and GC-MS after derivatization (ISO 18862:2016)
Coffee and coffee products - Determination of acrylamide - Methods using HPLC-MS/MS and GC-MS after derivatization (ISO 18862:2016)
ISO 18862:2016 specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction and determination by HPLC-MS/MS and GC-MS. It was validated in a method validation study on roasted coffee, soluble coffee, coffee substitutes and coffee products with ranges from 53 μg/kg to 612,1 μg/kg.
Kaffee und Kaffee-Erzeugnisse - Bestimmung von Acrylamid - Verfahren mittels HPLC-MS/MS und mittels GC-MS nach Derivatisierung (ISO 18862:2016)
Dieses Dokument legt Verfahren zur Bestimmung des Acrylamidgehalts in Kaffee und Kaffee Erzeugnissen durch Wasserextraktion, Aufreinigung durch Festphasen Extraktion und Bestimmung mittels HPLC MS/MS und GC MS fest. Es wurde in einer Verfahrensvalidierungsstudie an Röstkaffee, löslichem Kaffee, Kaffeesurrogaten und Kaffee Erzeugnissen mit Bereichen von 53 μg/kg bis 612,1 μg/kg validiert.
Café et derivés du café - Détermination de la teneur en acrylamide - Méthodes par CLHP-SM/SM et CG-SM après dérivation (ISO 18862:2016)
Le présent document spécifie des méthodes de dosage de l'acrylamide dans le café et les dérivés du café par extraction à l'eau, purification par extraction en phase solide et dosage par CLHP-SM/SM et CG-SM. Il a été validé au cours d'une étude de validation de la méthode réalisée sur du café torréfié, du café soluble, des substituts de café et des dérivés du café dans des plages de concentration allant de 53 μg/kg à 612,1 μg/kg.
Kava in proizvodi iz kave - Določevanje akrilamida - Metode z uporabo HPLC-MS/MS in GC-MS po derivatizaciji (ISO 18862:2016)
ISO 18862:2016 določa metode za določevanje akrilamida v kavi in kavnih izdelkih z ekstrakcijo z vodo, čiščenje s trdnofazno ekstrakcijo ter določevanje s HPLC-MS/MS in GC-MS. Potrjena je bila v študiji potrjevanja metode na praženi kavi, topni kavi, kavnih nadomestkih in kavnih izdelkih z obsegom od 53 μg/kg do 612,1 µg/kg.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18862:2020
01-januar-2020
Kava in proizvodi iz kave - Določevanje akrilamida - Metode z uporabo HPLC-
MS/MS in GC-MS po derivatizaciji (ISO 18862:2016)
Coffee and coffee products - Determination of acrylamide - Methods using HPLC-MS/MS
and GC-MS after derivatization (ISO 18862:2016)
Kaffee und Kaffee-Erzeugnisse - Bestimmung von Acrylamid - Verfahren mittels HPLC-
MS/MS und mittels GC-MS nach Derivatisierung (ISO 18862:2016)
Café et derivés du café - Détermination de la teneur en acrylamide - Méthodes par
CLHP-SM/SM et CG-SM après dérivation (ISO 18862:2016)
Ta slovenski standard je istoveten z: EN ISO 18862:2019
ICS:
67.140.20 Kava in kavni nadomestki Coffee and coffee substitutes
SIST EN ISO 18862:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18862:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 18862:2020
EN ISO 18862
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 67.140.20
English Version
Coffee and coffee products - Determination of acrylamide -
Methods using HPLC-MS/MS and GC-MS after
derivatization (ISO 18862:2016)
Café et derivés du café - Dosage de l'acrylamide - Kaffee und Kaffee-Erzeugnisse - Bestimmung von
Méthodes par CLHP-SM/SM et CG-SM après dérivation Acrylamid - Verfahren mittels HPLC-MS/MS und
(ISO 18862:2016) mittels GC-MS nach Derivatisierung (ISO 18862:2016)
This European Standard was approved by CEN on 5 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18862:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18862:2020
EN ISO 18862:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18862:2020
EN ISO 18862:2019 (E)
European foreword
The text of ISO 18862:2016 has been prepared by Technical Committee ISO/TC 34 "Food products” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 18862:2019
by Technical Committee CEN/TC 275 “Food analysis - Horizontal methods” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18862:2016 has been approved by CEN as EN ISO 18862:2019 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 18862:2020
---------------------- Page: 6 ----------------------
SIST E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.