SIST EN 60745-2-19:2009/A1:2010

SLOVENSKI STANDARD
SIST EN 60745-2-19:2009/A1:2010
01-november-2010
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DUH]DOQLNH]
UH]DOQRSORãþR]DUH]DQMHUHåLQXWRURY'RSROQLOR$,(&
$
Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for
jointers (IEC 60745-2-19:2005/A1:2010)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-19: Besondere
Anforderungen für Flachdübelfräsen (IEC 60745-2-19:2005/A1:2010)
Outils électroportatifs à moteur - Sécurité - Partie 2-19: Règles particulières pour les
mortaiseuses (CEI 60745-2-19:2005/A1:2010)
Ta slovenski standard je istoveten z: EN 60745-2-19:2009/A1:2010
ICS:
25.100.01 Rezalna orodja na splošno Cutting tools in general
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-19:2009/A1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-19:2009/A1:2010

---------------------- Page: 2 ----------------------

SIST EN 60745-2-19:2009/A1:2010

EUROPEAN STANDARD
EN 60745-2-19/A1

NORME EUROPÉENNE
June 2010
EUROPÄISCHE NORM

ICS 25.140.20


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-19: Particular requirements for jointers
(IEC 60745-2-19:2005/A1:2010)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-19: Règles particulières pour Sicherheit -
les mortaiseuses Teil 2-19: Besondere Anforderungen
(CEI 60745-2-19:2005/A1:2010) für Flachdübelfräsen
(IEC 60745-2-19:2005/A1:2010)




This amendment A1 modifies the European Standard EN 60745-2-19:2009; it was approved by CENELEC on
2010-06-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-19:2009/A1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-19:2009/A1:2010
EN 60745-2-19:2009/A1:2010 - 2 -
Foreword
The text of document 116/36/FDIS, future amendment 1 to IEC 60745-2-19:2005, prepared by TC 116,
Safety of hand-held motor-operated electric tools, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as amendment A1 to EN 60745-2-19:2009 on 2010-06-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2011-03-01
an identical national st
...