SIST-TP CEN/TR 14073-1:2004
(Main)Office furniture - Storage furniture - Part 1: Dimensions
Office furniture - Storage furniture - Part 1: Dimensions
This Technical Report gives recommendations for dimensions for office storage furniture.
The dimensions given in this Technical Report are based on the dimensions of the various products (i.e. ways of
data storing) to be stored in the furniture. Annex A gives some examples of storage furniture.
This Technical Report does not apply to high density mechanised filing systems, rotary filing systems, or drawing
office storage furniture.
Büromöbel - Büroschränke - Teil 1: Maße
Mobilier de bureau - Meubles de rangement - Partie 1 : Dimensions
Le présent Rapport Technique donne des recommandations pour les dimensions des meubles de rangement de bureau.
Les dimensions données dans ce Rapport Technique sont basées sur les dimensions des divers produits (c'est a dire les moyens de stocker des données) a ranger dans les meubles. L'annexe A donne des exemples de meubles de rangement.
Ce Rapport Technique ne s'applique pas aux systemes mécanisés d'archivage, aux systemes de classement rotatifs et aux meubles de rangement pour plans.
Pisarniško pohištvo – Shranjevalno pohištvo – 1. del: Mere
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 14073-1:2004
01-december-2004
Pisarniško pohištvo – Shranjevalno pohištvo – 1. del: Mere
Office furniture - Storage furniture - Part 1: Dimensions
Büromöbel - Büroschränke - Teil 1: Maße
Mobilier de bureau - Meubles de rangement - Partie 1 : Dimensions
Ta slovenski standard je istoveten z: CEN/TR 14073-1:2004
ICS:
97.140 Pohištvo Furniture
SIST-TP CEN/TR 14073-1:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 14073-1:2004
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 14073-1:2004
TECHNICAL REPORT
CEN/TR 14073-1
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2004
ICS 97.140
English version
Office furniture - Storage furniture - Part 1: Dimensions
Mobilier de bureau - Meubles de rangement - Partie 1 : Büromöbel - Büroschränke - Teil 1: Maße
Dimensions
This Technical Report was approved by CEN on 12 October 2003. It has been drawn up by the Technical Committee CEN/TC 207.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 14073-1:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 14073-1:2004
CEN/TR 14073-1:2004 (E)
Contents Page
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Means of storing information .4
4.1 Paper documents.4
4.2 Paper files.5
4.3 Informatic (computer) documents (files).5
5 Dimensions of data and paper storage .5
5.1 Paper format.5
5.2 Paper files.6
5.3 Informatic (computer) documents (files).6
6 Dimensions.7
6.1 General.7
6.2 Outer (or overall) dimensions.7
6.3 Storage space dimensions .7
Annex A (informative) Examples of storage furniture .8
2
---------------------- Page: 4 ----------------------
SIST-TP CEN/TR 14073-1:2004
CEN/TR 14073-1:2004 (E)
Foreword
This document CEN/TR 14073-1:2004 has been prepared by Technical Committee CEN/TC 207 “Furniture”, the
secretariat of which is held by UNI.
This document provides information on the dimensions of office storage furniture.
The information given in this report reflects the current state-of the art derived from the experience of the European
office furniture manufacturers. It might be subject to revision in order to be kept up-to-date with developments of
needs and products as well.
Annex A is informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Report: Austria, Belgium, Cyprus, Czech Republic, Denma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.