SIST EN 681-2:2000/A2:2005
(Amendment)Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)
Elastomer-Dichtungen - Werkstoff-Anforderungen für Rohrleitungs-Dichtungen für Anwendungen in der Wasserversorgung und Entwässerung - Teil 2: Thermoplastische Elastomere
Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de l'évacuation - Partie 2: Elastomeres thermoplastiques
Elastomerna tesnila – Zahteve za materiale za tesnila za uporabo v napeljavah za vodo in kanalizacijo – 2. del: Plastomerni elastomeri
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2005
Elastomerna tesnila – Zahteve za materiale za tesnila za uporabo v napeljavah za
vodo in kanalizacijo – 2. del: Plastomerni elastomeri
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage
applications - Part 2: Thermoplastic elastomers
Elastomer-Dichtungen - Werkstoff-Anforderungen für Rohrleitungs-Dichtungen für
Anwendungen in der Wasserversorgung und Entwässerung - Teil 2: Thermoplastische
Elastomere
Garnitures d'étanchéité en caoutchouc - Spécification des matériaux pour garnitures
d'étanchéité pour joints de canalisations utilisées dans le domaine de l'eau et de
l'évacuation - Partie 2: Elastomeres thermoplastiques
Ta slovenski standard je istoveten z: EN 681-2:2000/A2:2005
ICS:
23.040.80 Tesnila za cevne zveze Seals for pipe and hose
assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 681-2:2000/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2005
ICS 23.040.80
English Version
Elastomeric seals - Material requirements for pipe joint seals
used in water and drainage applications - Part 2: Thermoplastic
elastomers
Garnitures d'étanchéité en caoutchouc - Spécification des Elastomer-Dichtungen - Werkstoff-Anforderungen für
matériaux pour garnitures d'étanchéité pour joints de Rohrleitungs-Dichtungen für Anwendungen in der
canalisations utilisées dans le domaine de l'eau et de Wasserversorgung und Entwässerung - Teil 2:
l'évacuation - Partie 2: Elastomères thermoplastiques Thermoplastische Elastomere
This amendment A2 modifies the European Standard EN 681-2:2000; it was approved by CEN on 14 July 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.