SIST EN 61755-3-1:2009

SLOVENSKI STANDARD
SIST EN 61755-3-1:2009
01-maj-2009
2SWLþQLYPHVQLNLNRQHNWRUMDRSWLþQLKYODNHQGHO2SWLþQLYPHVQLNV
FLOLQGULþQRFLUNRQVNRVSRMNR]DNRWHVWRSLQM3&HQRURGQDYODNQD,(&
02'FRUULJHQGXP-DQ
Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm
diameter cylindrical full zirconia PC ferrule, single mode fibre (IEC 61755-3-1:2006
(MOD) + corrigendum Jan. 2009)
Optische Schnittstellen für Lichtwellenleiter-Steckverbinder - Teil 3-1: Optische
Schnittstellen von Zirkonium-Stiften mit 2,5 mm und 1,25 mm Durchmesser für nicht
abgeschrägte Einmodenfasern mit physikalischem Kontakt (IEC 61755-3-1:2006 (MOD)
+ corrigendum Jan. 2009)
Interfaces optiques de connecteurs pour fibres optiques -- Partie 3-1: Interfaces
optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, fibres
unimodales (CEI 61755-3-1:2006 (MOD) + corrigendum Jan. 2009)
Ta slovenski standard je istoveten z: EN 61755-3-1:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61755-3-1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61755-3-1:2009

---------------------- Page: 2 ----------------------

SIST EN 61755-3-1:2009

EUROPEAN STANDARD
EN 61755-3-1

NORME EUROPÉENNE
February 2009
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic connector optical interfaces -
Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter
cylindrical full zirconia PC ferrule, single mode fibre
(IEC 61755-3-1:2006, modified + corrigendum 2009)


Interfaces optiques de connecteurs  Optische Schnittstellen
pour fibres optiques - für Lichtwellenleiter-Steckverbinder -
Partie 3-1: Interfaces optiques, Teil 3-1: Optische Schnittstellen mit
férules PC en zircone plein cylindrique nicht abgeschrägten Zirkonium-Ferrulen
de diamètre 2,5 mm et 1,25 mm, mit 2,5 mm und 1,25 mm Durchmesser
fibres unimodales für Einmodenfasern mit
(CEI 61755-3-1:2006, modifiée + physikalischem Kontakt
corrigendum 2009) (IEC 61755-3-1:2006, modifiziert +
Corrigendum 2009)




This European Standard was approved by CENELEC on 2008-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61755-3-1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61755-3-1:2009
EN 61755-3-1:2009 - 2 -
Foreword
The text of the International Standard IEC 61755-3-1:2006, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, together with the common
modifications prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect,
passive and connectorised components, was submitted to the formal vote and was approved by
CENELEC as EN 61755-3-1 on 2008-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-12-01
__________
Endorsement notice
The text of the International Standard IEC 61755-3-1:2006 + corrigendum January 2009 was approved by
CENELEC as a European Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Table 1 – Optical interface parameter values for 2,5 mm diameter ferrule
In row C, replace the 3 maximum values ‘70’ with ‘50’ (µm).
...