SIST EN 61300-2-12:2010

SLOVENSKI STANDARD
01-januar-2010
1DGRPHãþD
SIST EN 61300-2-12:2006
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNLGHO9SOLYLSUHVNXãDQMD,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-12: Tests - Impact (IEC 61300-2-12:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren - Teil 2-12: Prüfungen - Schlag (IEC 61300-2-12:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-12: Essais - Impact (CEI 61300-2-
12:2009)
Ta slovenski standard je istoveten z: EN 61300-2-12:2009
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-12
NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-12:2005

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-12: Tests -
Impact
(IEC 61300-2-12:2009)
Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Meßverfahren -
Partie 2-12: Essais - Teil 2-12: Prüfungen -
Impact Schlag
(CEI 61300-2-12:2009) (IEC 61300-2-12:2009)

This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-12:2009 E
Foreword
The text of document 86B/2784/CDV, future edition 3 of IEC 61300-2-12, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-12 on 2009-10-01.
This European Standard supersedes EN 61300-2-12:2005.
In EN 61300-2-12:2009, the impact test with a steel ball has been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-12:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61300-2-12:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance
1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
1) 2)
IEC 61753-1 - Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 61300-2-12 ®
Edition 3.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-12: Tests – Impact
Dispositifs d'interconnexion et composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 2-12: Essais – Impact
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
L
CODE PRIX
ICS 33.180.20 ISBN 2-8318-1052-4
– 2 – 61300-2-12 © IEC:2009
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 General description .5
4 Apparatus.5
4.1 Method A – Pendulum drop .5
4.1.1 Attaching fixture .5
4.1.2 Surface plate .6
4.2 Method B – Impact with steel ball .6
4.2.1 Impact tool .6
4.2.2 Surface.6
4.2.3 Drop apparatus.6
4.3 Method C – Free drop of specimen.7
4.3.1 Attaching fixture .7
4.3.2 Impact surface.7
5 Procedure .7
5.1 Preparation of specimen.7
5.2 Preconditioning .7
5.3 Initial examinations and measurements .8
5.4 Test method .8
5.4.1 General .8
5.4.2 Method A.8
5.4.3 Method B.8
5.4.4 Method C.9
5.4.5 Severity.10
5.5 Recovery.10
5.6 Final examinations and measurements.10
6 Details to be specified .10
6.1 Method A.10
6.2 Method B.10
6.3 Method C .11

Figure 1 – Method A – Apparatus.6
Figure 2 – Method B – Apparatus.7
Figure 3 – Orientations for edge and corner drops .9

Table 1 – Drop height .8
Table 2 – Drop height and specimen mass.9

61300-2-12 © IEC:2009 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-12: Tests – Impact
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the max
...