SIST EN 61753-083-2:2008

SLOVENSKI STANDARD
01-april-2008
,]YHGEHQLVWDQGDUG]DRSWLþQHVSRMQHHOHPHQWHLQSDVLYQHNRPSRQHQWH
GHO1DSUDYH]D:'0YDORYQLPXOWLSOHNV&SDV/SDV]HQRURGQLPLRSWLþQLPL
YODNQLEUH]NRQHNWRUMHY]DNDWHJRULMR&1DG]RURYDQRRNROMH,(&

Fibre optic interconnecting devices and passive components performance standard -
Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for
category C - Controlled environment (IEC 61753-083-2:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
083-2: Nicht mit Steckverbindern versehene Einmoden-Lichtwellenleiter-C-Band/L-Band-
WDM-Bauteile für die Kategorie C - Kontrollierte Umgebung (IEC 61753-083-2:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 083-2: Dispositifs WDM bande C/bande L à fibres
optiques unimodales, non connectorisés, pour catégorie C - Environnement contrôlé
(CEI 61753-083-2:2007)
Ta slovenski standard je istoveten z: EN 61753-083-2:2008
ICS:
33.180.20
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61753-083-2
NORME EUROPÉENNE
February 2008
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices
and passive components performance standard -
Part 083-2: Non-connectorised single-mode fibre
optic C-band/L-band WDM devices for category C -
Controlled environment
(IEC 61753-083-2:2007)
Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 083-2: Dispositifs WDM Betriebsverhalten -
bande C/bande L à fibres optiques Teil 083-2: Nicht mit Steckverbindern
unimodales, non connectorisés, versehene Einmoden-Lichtwellenleiter-
pour catégorie C - C-Band/L-Band-WDM-Bauteile
Environnement contrôlé für die Kategorie C -
(CEI 61753-083-2:2007) Kontrollierte Umgebung
(IEC 61753-083-2:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-083-2:2008 E

Foreword
The text of document 86B/2447/FDIS, future edition 1 of IEC 61753-083-2, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-083-2 on 2008-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-083-2:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61753-083-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 2004
Part 2-50: Product specifications - Sectional + corr. July 2004
specification for class B single-mode fibres

1) 2)
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)

1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

1) 2)
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
1) 2)
IEC 61300-2-14 - Fibre optic interconnecting devices and EN 61300-2-14 2006
passive components - Basic test and + corr. November 2006
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization

1) 2)
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
1) 2)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance
1) 2)
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

1) 2)
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
1) 2)
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 2005
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
1) 2)
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 1999
passive components - Basic tests and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependence of attenuation in a
single-mode fibre optic device

1) 2)
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 2003
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
1) 2)
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 2001
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss
1) 2)
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 2001
passive components - Basic test and + corr. March 2002
measurement procedures -
Part 3-20: Examinations and measurements -
Directivity of fibre optic branching devices

1) 2)
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 2006
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

1)
IEC/PAS 61300-3-38
- Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures -
Part 3-38: Group delay and chromatic
dispersion
- 5 - EN 61753-083-2:2008
Publication Year Title EN/HD Year
1) 2)
IEC 61753-021-2 - Fibre optic interconnecting devices and EN 61753-021-2 2008
passive component performance standard -
Part 021-2: Fibre optic connectors terminated
on single-mode fibre for category C -
Controlled environment
NORME CEI
INTERNATIONALE
IEC
61753-083-2
INTERNATIONAL
Première édition
STANDARD
First edition
2007-03
Norme de qualité de fonctionnement des
dispositifs d’interconnexion et composants
passifs à fibres optiques –
Partie 083-2:
Dispositifs WDM bande C/bande L
à fibres optiques unimodales, non
connectorisés, pour catégorie C –
Environnement contrôlé
Fibre optic interconnecting devices and passive
components performance standard –
Part 083-2:
Non-connectorised single-mode fibre optic
C-band/L-band WDM devices for category C –
Controlled environment
© IEC 2007 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
N
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61753-083-2 © IEC:2007 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Definitions .13
4 Abbreviated terms .13
5 Test procedure .13
6 Test report.13
7 Performance requirements .13
7.1 Dimensions .13
7.2 Test details and requirements .13

Annex A (normative) Sample size, sequencing and grouping requirements .25

Bibliography.27

Table 1 – Test details and requirements .15
Table A.1 – Sequencing and number of samples for each test .25

61753-083-2 © IEC:2007 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 083-2: Non-connectorised single-mode fibre optic
C-band/L-band WDM devices for category C –
Controlled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-083-2 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2447/FDIS 86B/2493/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

61753-083-2 © IEC:2007 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components performance standard, can be found on the
IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
61753-083-2 © IEC:2007 – 9 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 083-2: Non-connectorised single-mode fibre optic
C-band/L-band WDM devices for category C –
Controlled environment
1 Scope
This part
...