SIST EN 301 933-1 V1.1.1:2005

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Inteligentno omrežje (IN) – Tretji nabor zmožnosti inteligentnega omrežja (CS3) – Aplikacijski protokol inteligentnega omrežja (INAP) – Zgradba preskušalnega niza in namen preskušanja (TSS&TP) – Specifikacija za funkcijo komutacije storitev (SSF) – 1. del: Osnovni nabor zmožnosti CS3Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF); Part 1: Basic capability set of CS333.040.35Telefonska omrežjaTelephone networksICS:Ta slovenski standard je istoveten z:EN 301 933-1 Version 1.1.1SIST EN 301 933-1 V1.1.1:2005en01-januar-2005SIST EN 301 933-1 V1.1.1:2005SLOVENSKI
STANDARD



SIST EN 301 933-1 V1.1.1:2005



ETSI EN 301 933-1 V1.1.1 (2003-01)European Standard (Telecommunications series) Intelligent Network (IN);Intelligent Network Capability Set 3 (CS3);Intelligent Network Application Protocol (INAP);Test Suite Structure and Test Purposes (TSS&TP)specification for Service Switching Function (SSF);Part 1: Basic capability set of CS3
SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 2
Reference DEN/SPAN-120063-3-1 Keywords CS3, CTM, IN, INAP, SSF, TSS&TP, UPT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 3
Contents Intellectual Property Rights.6 Foreword.6 1 Scope.7 2 References.7 3 Definitions and abbreviations.8 3.1 Definitions.8 3.2 Abbreviations.8 4 Test Purpose generalities.9 4.1 Introduction.9 4.2 Grouping of Test Purposes per elementary procedures.9 4.3 Source of test purpose definitions.9 4.4 Method used for developing TPs.9 4.4.1 Use of MSCs generated by the SDL model of Core INAP CS3.9 4.4.2 TCAP adapter primitives.10 4.4.3 Generation of corresponding Test Cases.10 4.5 Method used for TP description.10 4.5.1 Text and MSCs.10 4.5.2 Test categories.10 4.5.3 Test purpose naming convention.11 4.5.4 Preambles and their naming conventions.11 4.5.5 How to interpret the parameters and their values as used in the MSCs.12 4.6 Test purpose parametrization and selection.13 5 Test configuration.18 6 TSS and TPs for CS3 basic capabilities.19 6.1 Introduction.19 6.2 Basic procedures.19 6.2.1 List of procedures.19 6.2.2 Definitions of the procedures.20 6.3 Structure of the test suite (TSS) for the basic capabilities.23 6.4 Notations.24 6.4.1 Names of preambles and postambles.24 6.4.2 TTCN-like notation for preamble, test case and postamble description.25 6.4.3 Representation of preambles, postambles and Test Purposes using MSCs.25 6.4.4 How to interpret the parameters and their values as used in the MSCs.25 6.4.4.1 General.25 6.4.4.2 INAP operation parameters and their values.25 6.4.4.3 Cause values related to signalling connection release messages.26 6.4.4.4 TCAP operation parameters and their values.26 6.5 Preambles and postambles used.27 6.5.1 Preamble descriptions.27 6.5.1.1 O_OS preamble.27 6.5.1.2 O_OS_ColIn preamble.27 6.5.1.3 O_S2P preamble.27 6.5.1.4 I_S1P preamble.27 6.5.1.5 I_S1P_S1P_S1P preamble.28 6.5.1.6 T_TS preamble.28 6.5.1.7 T_S2P preamble.28 6.5.1.8 STAT_S2P.29 6.5.1.9 STAT_1P.29 6.5.1.10 STAT_S1P_1P.29 6.5.1.11 PRE_TRIG.29 6.5.1.12 PRE_ACTIVATE_TRIG1.30 6.5.1.13 PRE_DEACTIVATE_TRIG1.30 SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 4
6.5.1.14 PRE_ACTIVATE_TRIG_PROF_2.30 6.5.1.15 PRE_DEACTIVATE_TRIG_PROF_2.31 6.5.1.16 PRE_ACTIVATE_TRIG_DP_2.32 6.5.1.17 PRE_DEACTIVATE_TRIG_DP_2.32 6.5.1.18 PRE_ACTIVATE_TRIG_DP_3.33 6.5.1.19 O_OSA_AC_CURR.33 6.5.1.20 O_OSA_AC_PULSE.34 6.5.1.21 O_OSA_AC.34 6.5.1.22 O_OSA_FCI.35 6.5.1.23 O_OSA_RNC.35 6.5.1.24 Preamble PRE_SCI_1.36 6.5.1.25 Preamble PRE_SCI_2.36 6.5.2 Postamble descriptions.36 6.5.2.1 SigConA_Release postamble.36 6.5.2.2 SigConA_Release_thenB postamble.37 6.5.2.3 ReleaseCallA postamble.37 6.5.2.4 ReleaseICA postamble.37 6.5.2.5 ReleaseCallAB_cause_00 postamble.37 6.5.2.6 ReleaseCallAB_cause_0F postamble.37 6.5.2.7 SigConB_Release postamble.37 6.5.2.8 SigConB_Release_cause_0D postamble.37 6.5.2.9 SigConA_Release_thenB_cause10 postamble.37 6.5.2.10 ReleaseCallB postamble.38 6.5.2.11 ReleaseCallA2 postamble.38 6.5.2.12 ReleaseCallA3 postamble.38 6.5.2.13 ReleaseToAB postamble.38 6.5.2.14 ReleaseAandIgnoreStat.38 6.5.2.15 ReleaseABandIgnoreStat.39 6.5.2.16 TrigReleaseA postamble.39 6.5.2.17 TrigReleaseB postamble.39 6.5.2.18 TrigReleaseAB postamble.39 6.5.2.19 TrigReleaseA2 postamble.40 6.5.2.20 StopGapCld(cldDigits,scf,ctrl,clear) postamble.40 6.5.2.21 StopGapCld2(cldDigits,scf,ctrl,clear) postamble.41 6.5.2.22 StopGapCld3(cldDigits,scf,ctrl,clear) postamble.41 6.5.2.23 StopGapCldService(skey,cldDigits,scf,ctrl,clear) postamble.42 6.5.2.24 StopGapCldService2(skey, cldDigits, scf, ctrl, clear) postamble.42 6.5.2.25 StopGapClgService(skey, clgDigits, locNum, scf, ctrl, clear) postamble.43 6.5.2.26 StopGapClgService2(skey, clgDigits, locNum, scf, ctrl, clear) postamble.44 6.5.2.27 StopGapGos(sKey, scf, ctrl, clear) postamble.44 6.5.2.28 StopGapGos2(sKey, scf, ctrl, clear) postamble.45 6.5.2.29 StopGapGos3(sKey,scf,ctrl,clear) postamble.46 6.5.2.30 StopGapGosOS(sKey,scf,ctrl,clear) postamble.47 6.5.2.31 StopGapAllIn(scf, ctrl, clear) postamble.47 6.5.2.32 StopGapAllIn2(scf, ctrl, clear) postamble.48 6.5.2.33 Postamble POST_SCI_RELEASE_B.48 6.5.2.34 Postamble POST_SCI_RELEASE_BC.49 6.5.2.35 Postamble POST_SCI_EXCEPT_RELEASE_B.49 6.5.2.36 Postamble POST_SCI_EXCEPT_RELEASE_BC.49 6.6 Test Purposes (TP) description.50 6.6.1 ActivityTest (AT) procedure.50 6.6.2 ApplyCharging (AC) procedure.54 6.6.3 CallGap (CG) procedure.83 6.6.4 CallInformation (CF) procedure.126 6.6.5 Cancel (CA) procedure.142 6.6.6 CollectInformation (CI) procedure.143 6.6.7 Connect (CO) procedure.149 6.6.8 EntityReleased (ER) procedure.171 6.6.9 CreateOrRemoveTriggerData (CT) procedure.172 6.6.10 Continue (CU) procedure.258 6.6.11 ContinueWithArgument (CWA) procedure.260 6.6.12 FurnishChargingInformation (FC) procedure.260 SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 5
6.6.13 InitialDP (DP) procedure.282 6.6.14 InitiateCallAttempt (IC) procedure.296 6.6.15 ManageTriggerData (MT) procedure.304 6.6.16 ReleaseCall (RC) procedure.354 6.6.17 ReportUTSI (RP) procedure.362 6.6.18 RequestCurrentStatusReport (RT) procedure.362 6.6.19 RequestEveryStatusChangeReport (RE) procedure.365 6.6.20 RequestFirstStatusMatchReport (RF) procedure.387 6.6.21 RequestNotificationChargingEvent (RN) procedure.397 6.6.22 RequestReportBCSMEvent (RR) procedure.407 6.6.23 ResetTimer (RS) procedure.468 6.6.24 SendChargingInformation (SCI) procedure.471 6.6.24.1 General information on testing SCI.471 6.6.24.2 Send Charging InformationTest Purposes.474 6.6.25 Service Filtering (SF) procedure.518 6.6.26 SetServiceProfile (SP) procedure.528 Annex A (informative): Description of various functional configurations.538 Annex B (informative): Bibliography.539 History.540
SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 1 of a multi-part deliverable covering the Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF), as identified below: Part 1: "Basic capability set of CS3"; Part 2: "Call Party Handling (CPH)"; Part 3: "Specialized Resource Function (SRF)".
National transposition dates Date of adoption of this EN: 10 January 2003 Date of latest announcement of this EN (doa): 30 April 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 October 2003 Date of withdrawal of any conflicting National Standard (dow): 31 October 2003
SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 7
1 Scope The present document provides the Test Suite Structure and Test Purposes (TSS&TP) for the testing of the "Basic" operations of the Service Switching Function (SSF), defined for the Intelligent Network Application Protocol (INAP) of Intelligent Network (IN) Capability Set 3 (CS3) according to EN 301 931-1 [1] and EN 301 931-2 [2]. The present document is completed by other parts constituting the testing of the CS3 Core INAP specifications: EN 301 933-2 [5] (Call party handling functions) and EN 301 933-3 [6] (Specialized Resource Function). ISO/IEC 9646-1 [8] and ISO/IEC 9646-2 [9] are used as the basis for the testing methodology. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. [1] ETSI EN 301 931-1: "Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Protocol specification; Part 1: Common aspects". [2] ETSI EN 301 931-2: "Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Protocol specification; Part 2: SCF-SSF interface". [3] ETSI EN 301 931-3: "Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Protocol specification; Part 3: SCF-SRF interface". [4] ETSI EN 301 931-4: "Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Protocol specification; Part 4: SDLs for SCF-SSF interface". [5] ETSI EN 301 933-2: "Intelligent Network (IN); Intelligent Network capability Set 3 (CS3); Intelligent Network Application protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF); Part 2: Call Party Handling (CPH)". [6] ETSI EN 301 933-3: "Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF); Part 3: Specialized Resource Function (SRF)". [7] ETSI ES 201 296 (V1.2.2): "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP); Signalling aspects of charging". [8] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts". [9] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification". SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 8
3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: - terms defined in EN 301 931-1 [1]; - terms defined in ISO/IEC 9646-1 [8] and in ISO/IEC 9646-2 [9]. In particular, the following terms defined in ISO/IEC 9646-1 [8] apply: - Abstract Test Suite (ATS); - Implementation Under Test (IUT); - System Under Test (SUT); - Protocol Implementation Conformance Statement (PICS). 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATS Abstract Test Suite BI Invalid Behaviour tests BO Inopportune Behaviour tests BV Valid Behaviour tests CA Capability tests CPH Call Party Handling CS Call Segment CS Capability Set EDP-R Event Detection Point - Request FSM Finite State Machine IN Intelligent Network INAP Intelligent Network Application Protocol IUT Implementation Under Test MSC Message Sequence Chart PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement PIXIT Protocol Implementation eXtra Information for Testing SCF Service Control Function SCP Service Control Point SDL Specification and Description Language SRF Specialized Resource Function SSF Service Switching Function SSP Service Switching Point SUT System Under Test TCAP Transaction Capabilities Application Part TP Test Purpose TSS Test Suite Structure SIST EN 301 933-1 V1.1.1:2005



ETSI ETSI EN 301 933-1 V1.1.1 (2003-01) 9
4 Test Purpose generalities 4.1 Introduction A TP is defined for one or several conformance requirements to be tested. It is expected, that each TP will result in a test case keeping the same name, specified in the ATS. 4.2 Grouping of Test Purposes per elementary procedures The Test Purposes are grouped by elementary procedures. A procedure groups elementary INAP operations which it is possible to test together. For each elementary procedure, are defined: how to invoke it; and what are the possible return results and return error(s) at the INAP interface. NOTE: Some have no results at all at this INAP interface.
...