SIST EN 301 650:2000
(Main)Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP)
- Abstract
definition of a DECT Multimedia Access Profile (DMAP) mainly for home and SOHO markets. This profile will combine a selection of the DECT data services with optional voice services offered by GAP allowing terminals to provide true integrated multimedia services. Data services and packet data and possibly isochronous services. The aim of this standard is to guarantee interoperability. The profile will define a selection of the relevant options available in the current data profiles and where necessary describe interworking scenarios. The multimedia profile will be based on existing profiles. This will limit the required standardisation effort and facilitate fast realisation of the profile and products to market. The profile may include an aspect of a DECT API.
- Status
- Published
- Publication Date
- 30-Nov-2000
- Technical Committee
- RES - Radio equipment and systems
Buy Documents
SIST EN 301 650:2000 is a SIST standard for Digital Enhanced Cordless Telecommunications (DECT) Multimedia Access Profile (DMAP) and Application Specific Access Profile (ASAP). It specifies a DECT data profile mainly for home and small office/home office (SOHO) use, combining selected DECT data services with optional voice services from Generic Access Profile (GAP) so terminals can provide integrated multimedia services. The focus is interoperability and a common fallback capability for compliant equipment.
What does SIST EN 301 650:2000 specify?
SIST EN 301 650:2000 defines the DMAP profile, its scope, and the way DECT data and voice capabilities are combined for interoperable terminals. Clause 1 sets the scope, Clause 2 lists the referenced standards, Clause 3 gives definitions, symbols and abbreviations, Clauses 4 to 6 set the service objectives and profile-specific requirements, and Annexes A to D give normative profile additions for operating parameters and application areas.
| Annex | What it covers |
|---|---|
| Annex A | Operating parameters |
| Annex B | Wireless LAN and Frame Relay (FREL) interworking conventions |
| Annex C | Wireless V.24 character-oriented service interworking conventions |
| Annex D | Distributed communications |
In practice, this means the standard is not only about one radio interface feature. It also tells implementers which application modes, layer behaviors and interworking options belong to a compliant DMAP terminal.
What are the key requirements of SIST EN 301 650:2000?
SIST EN 301 650:2000 builds on existing DECT profiles and then narrows them to a profile intended to be interoperable across voice and data uses. The most important requirements are in Clause 5, Clause 6 and the annexes.
Baseline DECT and voice behavior
Clause 5 says EN 300 176-1 applies in any case. Where voice services are provided, EN 300 176-2 and EN 300 444 also apply, together with harmonized standards based on them. In practice, a terminal claiming DMAP support must still meet the relevant DECT radio and speech profile requirements before its data features can be considered.
Application support and feature declaration
Clause 6.2.1 requires a compliant terminal to indicate and prove the application support it claims. Table 1 covers Voice, Wireless V.24, Wireless LAN and Distributed Communication support. For buyers and engineers, this means compliance is tied to declared capability, not to a vague general claim.
Network layer functions
Clause 6.2.2 adapts NWK layer behavior for the profile. Table 2 covers outgoing call, on-hook full release, incoming call, location registration, on-air key allocation, alerting, terminate access rights and authentication of the fixed part (FT). Table 3 maps key features to procedures such as outgoing call request and incoming call connection. In practice, this is the control logic that makes call setup, registration and access control work consistently across compatible terminals.
Data link, MAC and management behavior
Clauses 6.2.3 to 6.2.5 state how the DLC layer, MAC layer and Management Entity (ME) requirements are inherited from EN 301 649, with modifications for this profile. Requirements related to DPRS Class 1 terminals are out of scope. In practice, implementers use the packet-data profile behavior as the base and then apply the DMAP-specific changes.
Distributed communications and application features
Clause 6.2.7 and Annex D cover distributed communications, and Clause 6.2.6 covers application features. Voice applications may also implement the distributed communications requirements. This matters when a product needs coordinated behavior between terminals rather than only a simple point-to-point link.
Operating parameters and interworking options
Annex A applies EN 301 649 operating parameters with profile-specific support for DPRS classes of terminals. Annex B and Annex C define the interworking conventions for Wireless LAN and Wireless V.24, including the external protocols supported. This tells implementers which external network types the terminal can connect to and how.
What terms does SIST EN 301 650:2000 define?
DECT - Digital Enhanced Cordless Telecommunications, the cordless platform the profile is built on.
DMAP - DECT Multimedia Access Profile, the profile that combines selected voice and data services.
ASAP - Application Specific Access Profile, the application-focused access profile named in the title.
GAP - Generic Access Profile, the DECT voice profile used here as the voice reference.
DPRS - DECT Packet Radio Service, the data profile used as the main base for the data part.
FREL - Frame Relay, the service used in Annex B interworking conventions.
ME - Management Entity, the layer responsible for management behavior in the profile.
Who uses SIST EN 301 650:2000?
SIST EN 301 650:2000 is used by DECT terminal manufacturers, chipset and firmware developers, interoperability engineers, and test laboratories. It is relevant to products for home and SOHO markets that need voice plus data, such as terminals with Wireless LAN or Wireless V.24 interworking. Quality managers and buyers use it to check which application modes a product claims and what base DECT profiles it must support.
Which standards are used with SIST EN 301 650:2000?
The profile relies on several companion standards named in Clause 2 and Clause 5:
- EN 300 176-1 - applies in any case as the DECT approval test specification for radio.
- EN 300 176-2 - applies when speech services are provided.
- EN 300 444 - the DECT Generic Access Profile (GAP), used for voice-related requirements.
- EN 301 649 - the DECT Packet Radio Service (DPRS) profile, used as the base for many data and management requirements.
- ISO/IEC 8802-3 - Ethernet support referenced for Wireless LAN interworking.
- ISO/IEC 8802-5 - Token Ring support referenced as an optional external protocol.
- ISO/IEC 9646-7 - the conformance testing framework referenced for the status notation.
- TBR 22 - harmonized attachment requirements for DECT GAP terminal equipment.
What does the SIST EN 301 650:2000 document contain?
The document contains a reference configuration figure for DMAP, requirement tables, and profile-specific procedure descriptions. Clause 6 includes tables for application support, NWK feature status, and feature-to-procedure mapping, which are the core implementation guidance for compliance checking. Annexes A to D then add operating parameters and interworking requirements for Wireless LAN, Wireless V.24 and distributed communications. These parts are used for design, implementation, testing and conformity assessment.
Buy Documents
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 301 650:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP)". This standard covers: definition of a DECT Multimedia Access Profile (DMAP) mainly for home and SOHO markets. This profile will combine a selection of the DECT data services with optional voice services offered by GAP allowing terminals to provide true integrated multimedia services. Data services and packet data and possibly isochronous services. The aim of this standard is to guarantee interoperability. The profile will define a selection of the relevant options available in the current data profiles and where necessary describe interworking scenarios. The multimedia profile will be based on existing profiles. This will limit the required standardisation effort and facilitate fast realisation of the profile and products to market. The profile may include an aspect of a DECT API.
definition of a DECT Multimedia Access Profile (DMAP) mainly for home and SOHO markets. This profile will combine a selection of the DECT data services with optional voice services offered by GAP allowing terminals to provide true integrated multimedia services. Data services and packet data and possibly isochronous services. The aim of this standard is to guarantee interoperability. The profile will define a selection of the relevant options available in the current data profiles and where necessary describe interworking scenarios. The multimedia profile will be based on existing profiles. This will limit the required standardisation effort and facilitate fast realisation of the profile and products to market. The profile may include an aspect of a DECT API.
SIST EN 301 650:2000 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 301 650:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 650 V3SIST EN 301 650:2000en01-PDM-20003SIST EN 301 650:2000SLOVENSKI
STANDARD
ETSIEN301650V1.1.1(2000-02)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);DECTMultimediaAccessProfile(DMAP);ApplicationSpecificAccessProfile(ASAP)SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)2ReferenceDEN/DECT-020138KeywordsDECT,access,DATA,SOHO,profileETSIPostaladdressF-06921SophiaAntipolisCedex-FRANCEOfficeaddress650RoutedesLucioles-SophiaAntipolisValbonne-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88Internetsecretariat@etsi.frIndividualcopiesofthisETSIdeliverablecanbedownloadedfromhttp://www.etsi.orgIfyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frImportantnoticeThisETSIdeliverablemaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.CopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)3ContentsIntellectualPropertyRights.4Foreword.41Scope.52References.53Definitions,symbolsandabbreviations.63.1Definitions.63.2Symbols.63.3Abbreviations.64Serviceobjectives.75Relevantrequirements.86Profilespecificrequirements.86.1General.86.2Requirementstables.86.2.1General.86.2.2NWKlayer.96.2.3DLCLayer.96.2.4MAClayer.96.2.5ManagementEntity(ME).106.2.6Applicationfeatures.106.2.7Distributedcommunications.106.3Profilespecificproceduresdescription.106.3.1General.106.3.2Managemententityrequirements.106.3.3MAClayerrequirements.106.3.4DLClayerrequirements.106.3.5NWKlayerrequirements.10AnnexA(normative):Operatingparameters.11A.1General.11AnnexB(normative):WirelessLAN.12B.1General.12AnnexC(normative):WirelessV.24.13C.1General.13AnnexD(normative):DistributedCommunications.14Bibliography.15History.16SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinSR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinSR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).NationaltranspositiondatesDateofadoptionofthisEN:14January2000DateoflatestannouncementofthisEN(doa):30April2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31October2000DateofwithdrawalofanyconflictingNationalStandard(dow):31October2000SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)51ScopeThescopeofthepresentdocumentistodefineadataApplicationSpecificAccessProfile(ASAP)intendedmainlyforhomeandsmallofficeandhomeoffice(SOHO)marketscombiningaselectionofDECTdataserviceswithDECTvoiceservicesofferedbyGenericAccessProfile(GAP),therebyallowingterminalstoprovidetrueintegratedmultimediaservices.TheaimofthepresentdocumentistoguaranteeasufficientlevelofinteroperabilityandtoprovideaneasyroutefordevelopmentofDECTDATAapplications,withthefeaturesofthepresentdocumentbeingacommonfall-backoptionavailableinallcomplianttothisprofileequipment.2ReferencesThefollowingdocumentscontainprovisions,whichthroughreferenceinthistext,constituteprovisionsofthepresentdocument.•Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.•Foraspecificreference,subsequentrevisionsdonotapply.•Foranon-specificreference,thelatestversionapplies.•Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]EN300176-1:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part1:Radio".[2]EN300176-2:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part2:Speech".[3]EN300444:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)".[4]EN301649:"DigitalEnhancedCordlessTelecommunications(DECT);DECTPacketRadioServices(DPRS)".[5]ISO/IEC8802-3(1996):"Informationtechnology-Telecommunicationsandinformationexchangebetweensystems-Localandmetropolitanareanetworks-Specificrequirements-Part3:Carriersensemultipleaccesswithcollisiondetection(CSMA/CD)accessmethodandphysicallayerspecifications".[6]ISO/IEC8802-5(1998):"Informationtechnology-Telecommunicationsandinformationexchangebetweensystems-LocalandMetropolitanAreaNetworks-Specificrequirements-Part5:Tokenringaccessmethodandphysicallayerspecifications".[7]ISO/IEC9646-7:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:Implementationconformancestatement".[8]TBR22:"RadioEquipmentandSystems(RES);AttachmentrequirementsforterminalequipmentforDigitalEnhancedCordlessTelecommunications(DECT)GenericAccessProfile(GAP)applications".SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)63Definitions,symbolsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninEN301649[4]andEN300444[3]apply.3.2SymbolsThesymbolsdefinedinthissubclauseareappliedforprocedures,features,andservicesinthepresentdocumentifnotexplicitlyotherwisestated.Theinterpretationofstatuscolumnsinalltablesisasfollows:Mformandatorytosupport(provisionmandatory,processmandatory);Oforoptionaltosupport(provisionoptional,processmandatory);O.xoptioncomprisingnumberofitems;Iforout-of-scope(provisionoptional,processoptional)notsubjectfortesting;Cforconditionaltosupport(processmandatory);N/Afornot-applicable(inthegivencontextthespecificationmakesitimpossibletousethiscapability);Xexcluded,notallowed.Provisionmandatory,processmandatorymeansthattheindicatedfeatureserviceorprocedureshallbeimplementedasdescribedinthepresentdocument,andmaybesubjecttotesting.Provisionoptional,processmandatorymeansthattheindicatedfeat
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 650 Version 1.1.1SIST EN 301 650:2000en01-december-2000SIST EN 301 650:2000SLOVENSKI
STANDARD
ETSIEN301650V1.1.1(2000-02)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);DECTMultimediaAccessProfile(DMAP);ApplicationSpecificAccessProfile(ASAP)SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)2ReferenceDEN/DECT-020138KeywordsDECT,access,DATA,SOHO,profileETSIPostaladdressF-06921SophiaAntipolisCedex-FRANCEOfficeaddress650RoutedesLucioles-SophiaAntipolisValbonne-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88Internetsecretariat@etsi.frIndividualcopiesofthisETSIdeliverablecanbedownloadedfromhttp://www.etsi.orgIfyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frImportantnoticeThisETSIdeliverablemaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.CopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)3ContentsIntellectualPropertyRights.4Foreword.41Scope.52References.53Definitions,symbolsandabbreviations.63.1Definitions.63.2Symbols.63.3Abbreviations.64Serviceobjectives.75Relevantrequirements.86Profilespecificrequirements.86.1General.86.2Requirementstables.86.2.1General.86.2.2NWKlayer.96.2.3DLCLayer.96.2.4MAClayer.96.2.5ManagementEntity(ME).106.2.6Applicationfeatures.106.2.7Distributedcommunications.106.3Profilespecificproceduresdescription.106.3.1General.106.3.2Managemententityrequirements.106.3.3MAClayerrequirements.106.3.4DLClayerrequirements.106.3.5NWKlayerrequirements.10AnnexA(normative):Operatingparameters.11A.1General.11AnnexB(normative):WirelessLAN.12B.1General.12AnnexC(normative):WirelessV.24.13C.1General.13AnnexD(normative):DistributedCommunications.14Bibliography.15History.16SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinSR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinSR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).NationaltranspositiondatesDateofadoptionofthisEN:14January2000DateoflatestannouncementofthisEN(doa):30April2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31October2000DateofwithdrawalofanyconflictingNationalStandard(dow):31October2000SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)51ScopeThescopeofthepresentdocumentistodefineadataApplicationSpecificAccessProfile(ASAP)intendedmainlyforhomeandsmallofficeandhomeoffice(SOHO)marketscombiningaselectionofDECTdataserviceswithDECTvoiceservicesofferedbyGenericAccessProfile(GAP),therebyallowingterminalstoprovidetrueintegratedmultimediaservices.TheaimofthepresentdocumentistoguaranteeasufficientlevelofinteroperabilityandtoprovideaneasyroutefordevelopmentofDECTDATAapplications,withthefeaturesofthepresentdocumentbeingacommonfall-backoptionavailableinallcomplianttothisprofileequipment.2ReferencesThefollowingdocumentscontainprovisions,whichthroughreferenceinthistext,constituteprovisionsofthepresentdocument.•Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.•Foraspecificreference,subsequentrevisionsdonotapply.•Foranon-specificreference,thelatestversionapplies.•Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]EN300176-1:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part1:Radio".[2]EN300176-2:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part2:Speech".[3]EN300444:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)".[4]EN301649:"DigitalEnhancedCordlessTelecommunications(DECT);DECTPacketRadioServices(DPRS)".[5]ISO/IEC8802-3(1996):"Informationtechnology-Telecommunicationsandinformationexchangebetweensystems-Localandmetropolitanareanetworks-Specificrequirements-Part3:Carriersensemultipleaccesswithcollisiondetection(CSMA/CD)accessmethodandphysicallayerspecifications".[6]ISO/IEC8802-5(1998):"Informationtechnology-Telecommunicationsandinformationexchangebetweensystems-LocalandMetropolitanAreaNetworks-Specificrequirements-Part5:Tokenringaccessmethodandphysicallayerspecifications".[7]ISO/IEC9646-7:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:Implementationconformancestatement".[8]TBR22:"RadioEquipmentandSystems(RES);AttachmentrequirementsforterminalequipmentforDigitalEnhancedCordlessTelecommunications(DECT)GenericAccessProfile(GAP)applications".SIST EN 301 650:2000
ETSIETSIEN301650V1.1.1(2000-02)63Definitions,symbolsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninEN301649[4]andEN300444[3]apply.3.2SymbolsThesymbolsdefinedinthissubclauseareappliedforprocedures,features,andservicesinthepresentdocumentifnotexplicitlyotherwisestated.Theinterpretationofstatuscolumnsinalltablesisasfollows:Mformandatorytosupport(provisionmandatory,processmandatory);Oforoptionaltosupport(provisionoptional,processmandatory);O.xoptioncomprisingnumberofitems;Iforout-of-scope(provisionoptional,processoptional)notsubjectfortesting;Cforconditionaltosupport(processmandatory);N/Afornot-applicable(inthegivencontextthespecificationmakesitimpossibletousethiscapability);Xexcluded,notallowed.Provisionmandatory,processmandatorymeansthattheindicatedfeatureserviceorprocedureshallbeimplementedasdescribedinthepresentdocument,andmaybesubjecttotesting.Provisionoptional,processmandatorymeansthattheindic
...