SIST EN ISO 15384:2020/A1:2021

SLOVENSKI STANDARD
SIST EN ISO 15384:2020/A1:2021
01-december-2021
Zaščitna obleka za gasilce - Laboratorijske preskusne metode in zahtevane
lastnosti gasilskih oblek za gašenje v naravi - Dopolnilo A1 (ISO 15384:2018/Amd
1:2021)
Protective clothing for firefighters - Laboratory test methods and performance
requirements for wildland firefighting clothing - Amendment 1 (ISO 15384:2018/Amd
1:2021)
Schutzkleidung für die Feuerwehr - Laborprüfverfahren und Leistungsanforderungen für
Schutzkleidung für die Brandbekämpfung im freien Gelände - Änderung 1 (ISO
15384:2018/Amd 1:2021)
Habillement de protection pour sapeurs-pompiers - Méthodes d'essai en laboratoire et
exigences de performance pour vêtements portés pendant la lutte contre les feux
d'espaces naturels - Amendement 1 (ISO 15384:2018/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 15384:2020/A1:2021
ICS:
13.220.10 Gašenje požara Fire-fighting
13.340.10 Varovalna obleka Protective clothing
SIST EN ISO 15384:2020/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15384:2020/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 15384:2020/A1:2021


EN ISO 15384:2020/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2021
EUROPÄISCHE NORM
ICS 13.340.10
English Version

Protective clothing for firefighters - Laboratory test
methods and performance requirements for wildland
firefighting clothing - Amendment 1 (ISO
15384:2018/Amd 1:2021)
Habillement de protection pour sapeurs-pompiers - Schutzkleidung für die Feuerwehr -
Méthodes d'essai en laboratoire et exigences de Laborprüfverfahren und Leistungsanforderungen für
performance pour vêtements portés pendant la lutte Schutzkleidung für die Brandbekämpfung im freien
contre les feux d'espaces naturels - Amendement 1 Gelände - Änderung 1 (ISO 15384:2018/Amd 1:2021)
(ISO 15384:2018/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 15384:2020; it was approved by CEN on 25 September 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15384:2020/A1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15384:2020/A1:2021
EN ISO 15384:2020/A1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15384:2020/A1:2021
EN ISO 15384:2020/A1:2021 (E)
European foreword
This document (EN ISO 15384:2020/A1:2021) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of which is
held by DIN.
This Amendment to the European Standard EN ISO 15384:2020 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2022, and
conflicting national standards shall be withdrawn at the latest by April 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15384:2018/Amd 1:2021 has been approved by CEN as EN ISO 15384:2020/A1:2021
without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 15384:2020/A1:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 15384:2020/A1:2021
INTERNATIONAL ISO
STANDARD 15384
Second edition
2018-06
AMENDMENT 1
2021-09
Protective clothing for firefighters —
Laboratory test methods and
performance requirements for
wildland firefighting clothing
AMENDMENT 1
Habillement de protection pour sapeurs-pompiers — Méthodes
d'essai en laboratoire et exigences de performance pour vêtements
portés pendant la lutte contre les feux d'espaces naturels
AMENDEMENT 1
Reference number
ISO 15384:2018/Amd.1:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 15384:2020/A1:2021
ISO 15384:2018/Amd.1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 15384:2020/A1:2021
ISO 15384:2018/Amd.1:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing
and equipment, Subcommittee SC 14, Firefighters' personal equipment, in collaboration with the European
Commit
...