SIST EN 300 476-7 V1.2.1:2003
(Main)Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer
- Abstract
Version 2 of the PICS for voluntary testing of ETS 300 175. This update corrects errors which were found during the implementation of the first edition of this document (ETS 300 476-1) and alignment with the second edition of ETS 300 175.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
- Mandate
- T-292
SIST EN 300 476-7 V1.2.1:2003 is a European Telecommunications Standards Institute (ETSI) Protocol Implementation Conformance Statement (PICS) proforma for the Digital Enhanced Cordless Telecommunications (DECT) Common Interface. It covers Part 7, the Physical layer, and tells a supplier how to document which physical-layer capabilities an implementation supports when claiming conformance to EN 300 175-2. It is used for voluntary conformance testing and for a formal supplier statement of support.
What does SIST EN 300 476-7 V1.2.1:2003 specify?
SIST EN 300 476-7 V1.2.1:2003 specifies the PICS proforma for the DECT Common Interface Physical layer at the Portable Termination, with completion guidance based on ISO/IEC 9646-7. A supplier claiming conformance to EN 300 175-2 is required to complete the Annex A proforma.
The document is organized into:
- Scope
- References
- Definitions and abbreviations
- Conformance requirement concerning PICS
- Annex A, the normative Physical (PHY) layer PICS proforma
- Bibliography and history
Annex A is the practical core of the standard. It contains the questionnaire, the completion instructions, and the tables that record implementation identity, protocol identity, supported services, procedures, packet types, transmitter characteristics, and receiver characteristics.
What are the key requirements of SIST EN 300 476-7 V1.2.1:2003?
SIST EN 300 476-7 V1.2.1:2003 requires the completed PICS to be technically equivalent to the Annex A proforma and to keep the same numbering, naming, and order of items. In practice, a supplier cannot redesign the questionnaire; the completed form has to follow the standard structure so that test labs can compare implementations consistently.
How the PICS must be completed
Annex A says the supplier fills in every required space using the prescribed notation. The form captures:
- date of statement
- IUT identification
- SUT identification
- product supplier, client, and contact person
- protocol identification
- defect reports, amendments, and addenda implemented
This matters because the PICS has to identify exactly what was tested and which version or modification set is being claimed.
What counts as conformance
Clause 4 states that all mandatory capabilities must be implemented. If any mandatory capability is not supported, the implementation is non-conforming and the unsupported items must be identified with an explanation in the PICS. That gives test labs and buyers a clear pass/fail basis.
How capabilities are reported
Annex A defines the status notation used in the tables, including mandatory, optional, conditional, prohibited, not applicable, and out-of-scope items. It also defines support entries such as supported, not supported, and no answer required, plus outcomes like error, ignored, or rejected where relevant. This lets the supplier describe implementation behavior precisely instead of using vague yes/no answers.
What physical-layer topics are covered
The capability tables in Annex A cover major services, physical-channel procedures, management procedures, protocol data units, and receiver/transmitter characteristics. For example, the form asks about RF carrier implementation, timing accuracy, jitter, channel types, frame structure, packet types, transmission power, modulation, receiver sensitivity, blocking, and intermodulation. In practice, these are the items a conformance tester will check against the claimed behavior.
What packet structures are included
Annex A includes packet support tables for TDMA frames and the packet types P00, P32, P08j, and P80, with separate transmission and reception entries where relevant. It also lists the fields inside those packets, such as synchronization fields, data fields, and Z-fields. This is important because physical-layer interoperability depends on the exact packet format as well as the radio performance.
What terms does SIST EN 300 476-7 V1.2.1:2003 define?
Implementation Conformance Statement (ICS) is a supplier statement that lists which capabilities have been implemented for a specified standard.
ICS proforma is the questionnaire form that becomes an ICS once it is completed for a specific implementation or system.
Protocol Implementation Conformance Statement (PICS) is an ICS that applies to a protocol specification.
Implementation Under Test (IUT) is the implementation being assessed for conformance.
System Under Test (SUT) is the system that contains the IUT.
DECT Common Interface ICS is an ICS for an implementation or system claiming conformance to a DECT Common Interface specification.
Who uses SIST EN 300 476-7 V1.2.1:2003?
SIST EN 300 476-7 V1.2.1:2003 is used by suppliers of DECT equipment, test laboratories, and conformance teams that need to document or verify physical-layer support. It is also useful for quality managers and buyers who need a structured declaration of what a product supports before acceptance or interoperability testing.
What changed in SIST EN 300 476-7 V1.2.1:2003 from the previous edition?
SIST EN 300 476-7 V1.2.1:2003 is Edition 2 of the PICS for voluntary testing of ETS 300 175. The scope states that it corrects errors found during implementation of the first edition and aligns the proforma with the second edition of ETS 300 175.
Which standards are used with SIST EN 300 476-7 V1.2.1:2003?
- EN 300 175-1 - provides the DECT Common Interface overview and the related terms used by the document.
- EN 300 175-2 - the physical layer specification that the PICS is completed against.
- ISO/IEC 9646-1 - gives the general conformance testing framework and concepts.
- ISO/IEC 9646-7 - gives the rules for Implementation Conformance Statements and PICS proformas.
What does the SIST EN 300 476-7 V1.2.1:2003 document contain?
The document contains instructions for completing a standardized PICS form and a full set of structured tables for supplier declarations. Annex A covers identity information, protocol version details, global conformance, service support, physical-layer procedures, management procedures, frame and packet structures, transmitter requirements, and receiver requirements. The tables are designed for conformance testing, verification of claimed support, and documentation review.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 476-7 V1.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer". This standard covers: Version 2 of the PICS for voluntary testing of ETS 300 175. This update corrects errors which were found during the implementation of the first edition of this document (ETS 300 476-1) and alignment with the second edition of ETS 300 175.
Version 2 of the PICS for voluntary testing of ETS 300 175. This update corrects errors which were found during the implementation of the first edition of this document (ETS 300 476-1) and alignment with the second edition of ETS 300 175.
SIST EN 300 476-7 V1.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 476-7 V1.2.1:2003 is associated with the following European legislation: Standardization Mandates: T-292. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 476-7 V1.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 476-7 Version 1.2.1SIST EN 300 476-7 V1.2.1:2003en01-december-2003SIST EN 300 476-7 V1.2.1:2003SLOVENSKI
STANDARD
ETSIEN300476-7V1.2.1(2000-11)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma;Part7:PhysicallayerSIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)2ReferenceREN/DECT-040106-7Keywordsaccess,DECT,PICS,radio,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)3ContentsIntellectualPropertyRights.4Foreword.41Scope.52References.53Definitionsandabbreviations.53.1Definitions.53.2Abbreviations.64ConformancerequirementconcerningPICS.6AnnexA(normative):Physical(PHY)layerPICSproforma.7A.1IntroductionforcompletingthePICSproforma.7A.1.1Purposesandstructure.7A.1.2InstructionforcompletingthePICS.8A.2Identificationoftheimplementation.9A.2.1Dateofstatement.9A.2.2ImplementationUnderTest(IUT)identification.9A.2.3SystemUnderTest(SUT)identification.9A.2.4Productsupplier.9A.2.5Client.10A.2.6Contactperson.10A.3Identificationoftheprotocol.11A.3.1Defectreportnumbersandamendmentsimplemented.11A.3.2Addendaimplemented.11A.4Globalstatementofconformance.11A.5Capabilities.12A.5.1Majorcapabilities.12A.5.1.1Services.12A.5.1.2Procedures.13A.5.1.2.1Physicallayerprocedures.13A.5.1.2.2Managemententityprocedures.13A.5.2ProtocolDataUnits.13A.5.3Receiver/Transmittercharacteristics.16A.5.3.1Transmittercharacteristics.16A.5.3.2Receivercharacteristics.17Bibliography.18History.19SIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).Thepresentdocumentispart7ofamulti-partdeliverablecoveringtheDigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma,asidentifiedbelow:Part1:"Network(NWK)layer-PortableradioTermination(PT)";Part2:"DataLinkControl(DLC)layer-PortableradioTermination(PT)";Part3:"MediumAccessControl(MAC)layer-PortableradioTermination(PT)";Part4:"Network(NWK)layer-FixedradioTermination(FT)";Part5:"DataLinkControl(DLC)layer-FixedradioTermination(FT)";Part6:"MediumAccessControl(MAC)layer-FixedradioTermination(FT)";Part7:"Physicallayer".AnnexAcontainsthePICSproformaforthephysicallayer.NationaltranspositiondatesDateofadoptionofthisEN:24November2000DateoflatestannouncementofthisEN(doa):28February2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31August2001DateofwithdrawalofanyconflictingNationalStandard(dow):31August2001SIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)51ScopeThepresentdocumentprovidestheProtocolImplementationConformanceStatement(PICS)proformafortheDigitalEnhancedCordlessTelecommunicationsNetworklayeratthePortableTerminationasdefinedinEN300175-2[2]incompliancewiththerelevantrequirementsandinaccordancewiththerelevantguidancegiveninISO/IEC9646-7[4].ThesupplierofanimplementationwhichisclaimedtoconformtoEN300175-2[2]isrequiredtocompleteacopyofthePICSproformaprovidedintheannexAofthepresentdocument.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300175-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part1:Overview".[2]ETSIEN300175-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part2:PhysicalLayer(PHL)".[3]ISO/IEC9646-1(1995):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[4]ISO/IEC9646-7(1995):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:-termsgiveninEN300175-1[1];-termsgiveninISO/IEC9646-1[3]andinISO/IEC9646-7[4].Inparticular,thefollowingtermsgiveninISO/IEC9646-1[3]apply:ImplementationConformanceStatement(ICS):statementmadebythesupplierofanimplementationorsystemclaimedtoconformtoagivenspecification,statingwhichcapabilitieshavebeenimplemented.TheICScantakeseveralforms:protocolICS,profileICS,profilespecificICS,informationobjectICS,etc.ICSproforma:document,intheformofaquestionnaire,whichwhencompletedforanimplementationorsystembecomesanICSProtocolICS(PICS):PICSforanimplementationorsystemclaimedtoconformtoagivenprotocolspecificationSIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)6Thefollowingdefinitionalsoapplies:DECTCommonInterfaceICS:ICSforanimplementationorsystemclaimedtoconformtoagivenDECTCommonInterfacespecification3.2AbbreviationsForthepurposesofthepresentdocument,theabbreviationsgiveninISO/IEC9646-1[3],thePhysicallayerabbreviationsgiveninEN300175-2[2],andthefollowingapply:ICSImplementationConformanceStatementIUTImplementationUnderTestlen_blengthspecifiedasBITSTRINGPICSProtocolImplementationConformanceStatementSp.support(ed)SUTSystemUnderTestvalvalue(ofthefield)4ConformancerequirementconcerningPICSIfitclaimstoconformtothepresentdocument,theactualPICSproformatobefilledinbyasuppliershallbetechnicallyequivalenttothetextofthePICSproformagiveninannexA,andshallpreservethenumbering/namingandorderingoftheproformaitems.AnICSwhichconformstothepresentdocumentshallbeaconformingPICSproformacompletedinaccordancewiththeinstructionsforcompletiongiveninclauseA.1.SIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)7AnnexA(normative):Physical(PHY)layerPICSproformaNotwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePICSproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPICS.A.1IntroductionforcompletingthePICSproformaA.1.1PurposesandstructureThepurposeofthisPICSproformaistoprovideamechanismwherebyasupplierofanimplementationoftheportableterminationspecificdatalinkcontrollayerrequirementsofEN300175-2[2]:DECTPHlayermayprovideinformationabouttheimplementationinastandardizedmanner.ThePICSproformaissubdividedintosubclausesforthefollowingcategoriesofinformation:-instructionsforcompletingthePICSproforma;-identificationoftheimplementation;-identificationoftheEN300175-2:DECTPHlayer;-PICSproformatables:-globalstatementofconformance;-functionalgroupsandprocedures;-timersandprotocolparameters;-messages;-informationelements;-negotiationcapabilities;-protocolerrorhandling;-multilayerdependencies.ThePICSproformacontainedinthisannexiscomprisedofinformationintabularforminaccordancewiththeguidelinespresentedinISO/IEC9646-7.ItemcolumnTheitemcolumncontainsanumberwhichidentifiestheiteminthetable.ItemdescriptioncolumnTheitemdescriptioncolumndescribesinfreetexteachrespectiveitem(e.g.parameters,timers,etc.).Itimplicitlymeans"issupportedbytheimplementation?".StatuscolumnThefollowingnotations,definedinISO/IEC9646-7,areusedforthestatuscolumn:morMmandatory-thecapabilityisrequiredtobesupported.oorOoptional-thecapabilitymaybesupportedornot.SIST EN 300 476-7 V1.2.1:2003
ETSIETSIEN300476-7V1.2.1(2000-11)8n/aorN/Anotapplicable-inthegivencontext,itisimpossibletousethecapability.xorXprohibited(excluded)-thereisarequirementnottousethiscapabilityinthegivencontext.o.iorO.iqualifiedoptional-formutuallyexclusiveorselectableoptionsfromaset."i"isanintegerwhichidentifiesanuniquegroupofrelatedoptionalitemsandthelogicoftheirselectionwhichisdefinedimmediatelyfollowingthetable.ciorCiconditional-therequirementonthecapability("m","o","x"or"n/a")dependsonthesupportofotheroptionalorconditionalitems."i"isanintegeridentifyinganuniqueconditionalstatusexpressionwhichisdefinedimmediatelyfollowingthetable.iorIout-of-scope-thiscapabilityisoutsidethescopeofthegivenspecification,andhenceirrelevantandnotsubjecttoconformancetesting.Thisstatusisinparticularapplicablefordatafieldswhicharereservedforfutureuse.Thestructureofsuchfieldshastobesupported,butthevalueisundefinedandthu
...