SIST EN 61754-20:2004

SIST EN 61754-20:2004SLOVENSKIseptember 2004
STANDARDKonektorski vmesniki optičnih vlaken – 20. del: Družina konektorjev tipa LC (IEC 61754-20:2002)*Fibre optic connector interfaces - Part 20: Type LC connector family (IEC 61754-20:2002)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61754-20:2004(en)ICS33.180.20







EUROPEAN STANDARD
EN 61754-20 NORME EUROPÉENNE EUROPÄISCHE NORM
October 2002 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61754-20:2002 E
ICS 33.180.20
English version
Fibre optic connector interfaces Part 20: Type LC connector family (IEC 61754-20:2002)
Interfaces de connecteurs
pour fibres optiques Partie 20: Famille de connecteurs
de type LC (CEI 61754-20:2002)
Steckgesichter von Lichtwellenleiter-Steckverbindern Teil 20: Steckverbinderfamilie
der Bauart LC (IEC 61754-20:2002)
This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.



EN 61754-20:2002 - 2 - Foreword The text of document 86B/1673/FDIS, future edition 1 of IEC 61754-20, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-20 on 2002-09-01. The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2003-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2005-09-01 __________ Endorsement notice The text of the International Standard IEC 61754-20:2002 was approved by CENELEC as a European Standard without any modification. __________



NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61754-20Première éditionFirst edition2002-08Interfaces de connecteurs pour fibres optiques –Partie 20:Famille de connecteurs de type LCFibre optic connector interfaces –Part 20:Type LC connector familyPour prix, voir catalogue en vigueurFor price, see current catalogue© IEC 2002
Droits de reproduction réservés
⎯
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photocopie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCODE PRIXPRICE CODEPCommission Electrotechnique InternationaleInternational Electrotechnical Commission



61754-20 © IEC:2002– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION____________FIBRE OPTIC CONNECTOR INTERFACES –Part 20: Type LC connector familyFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 61754-20 has been prepared by subcommittee 86B: Fibre opticinterconnecting devices and passive components, of IEC technical committee 86: Fibre optics.This first edition of IEC 61754-20 cancels and replaces IEC/PAS 61754-20 published in 2001.The text of this standard is based on the following documents:FDISReport on voting86B/1673/FDIS86B/1692/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.IEC 61754 consists of multiple parts, under the general title Fibre optic connector interfaces.–Part 1, entitled General and guidance, covers general information.–Subsequent parts contain interfaces for various connector families.



61754-20 © IEC:2002– 5 –The committee has decided that the contents of this publication will remain unchanged until 2005.At this date, the publication will be•reconfirmed;•withdrawn;•replaced by a revised edition, or•amended.



61754-20 © IEC:2002– 7 –FIBRE OPTIC CONNECTOR INTERFACES –Part 20: Type LC connector family1 ScopeThis International Standard defines the standard interface dimensions for the type LC family ofconnectors.2 DescriptionThe parent connector for type LC connector family is a single position plug connector set ofplug/adaptor configuration which is characterized by a 1,25 mm nominal diameter ferrule. Theconnector includes a single coupling latch and a ferrule spring loaded in the direction of theoptical axis The plug has a single male key, which may be used to orient and limit the relativeposition between the connector and the component to which it is mated. The optical alignmentmechanism of the connectors is a rigid bore sleeve or a resilient sleeve.3 InterfacesThis standard contains the following standard interfaces:Interface 20-1: simplex plug connector interface – PCInterface 20-2: simplex adaptor connector interfaceInterface 20-3: simplex active device receptacle interfaceInterface 20-4: duplex plug connector interface – PCInterface 20-5: duplex adaptor connector interfaceInterface 20-6: duplex active device receptacle interfaceInterface 20-7: simplex plug connector interface – APC 8°Interface 20-8: duplex plug connector interface – APC 8°The plug of interface 61754-20-1and interface 61754-20-4 has a
...