SIST EN 60317-0-3:2008/A1:2014

SLOVENSKI STANDARD
01-marec-2014
Specifikacije za posebne tipe navitij - 0-3. del: Splošne zahteve - Emajliran okrogel
aluminijev vodnik - Dopolnilo A1 (IEC 60317-0-3:2008/A1:2013)
Specifications for particular types of winding wires - Part 0-3: General requirements -
Enamelled round aluminium wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3:
Allgemeine Anforderungen - Runddrähte aus Aluminium, lackisoliert
Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Exigences
générales - Fil de section circulaire en aluminium émaillé
Ta slovenski standard je istoveten z: EN 60317-0-3:2008/A1:2013
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60317-0-3/A1
NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM
ICS 29.060.10
English version
Specifications for particular types of winding wires -
Part 0-3: General requirements -
Enamelled round aluminium wire
(IEC 60317-0-3:2008/A1:2013)
Spécifications pour types particuliers  Technische Lieferbedingungen für
de fils de bobinage - bestimmte Typen von Wickeldrähten -
Partie 0-3: Exigences générales - Teil 0-3: Allgemeine Anforderungen -
Fil de section circulaire en aluminium Runddrähte aus Aluminium, lackisoliert
émaillé (IEC 60317-0-3:2008/A1:2013)
(CEI 60317-0-3:2008/A1:2013)
This amendment A1 modifies the European Standard EN 60317-0-3:2008; it was approved by CENELEC on
2013-10-31. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-3:2008/A1:2013 E

Foreword
The text of document 55/1405/FDIS, future EN 60317-0-3:2008/A1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2014-07-31
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-10-31
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60317-0-3:2008/A1:2013 was approved by CENELEC as a
European Standard without any modification.
The Bibliography of EN 60317-0-3:2008 shall be deleted.

- 3 - EN 60317-0-3:2008/A1:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

Addition to Annex ZA of EN 60317-0-3:2008:

Publication Year Title EN/HD Year

IEC 60317 Series Specifications for particular types of winding EN 60317 Series
wires
IEC 60317-0-3 ®
Edition 3.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –

Part 0-3: General requirements – Enamelled round aluminium wire

Spécifications pour types particuliers de fils de bobinage –

Partie 0-3: Exigences générales – Fil de section circulaire en aluminium émaillé

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX F
ICS 29.060.10 ISBN 978-2-8322-1107-6
...