oSIST prEN 50377-14-1:2009

SLOVENSKI STANDARD
oSIST prEN 50377-14-1:2009
01-januar-2009
.RQHNWRUVNLVHVWDYLLQSRYH]RYDOQHNRPSRQHQWH]DRSWLþQHNRPXQLNDFLMVNH
VLVWHPH6SHFLILNDFLMDL]GHONDGHO3RYH]RYDOQHYUYLFH]HQRURGQLP
RSWLþQLPYODNQRPSR(1NDWHJRULM%LQ%]DNDWHJRULMR&
Connector sets and interconnect components to be used in optical fibre communication
systems - Product specifications - Part 14-1: Patch cords with EN 60793-2-50 single
mode category B1.1 and B1.3 fibre for category C
Ta slovenski standard je istoveten z: prEN 50377-14-1:2008
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
oSIST prEN 50377-14-1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 50377-14-1:2009

---------------------- Page: 2 ----------------------
oSIST prEN 50377-14-1:2009
 DRAFT
EUROPEAN STANDARD
prEN 50377-14-1

NORME EUROPÉENNE
November 2008
EUROPÄISCHE NORM

ICS


English version


Connector sets and interconnect components to be used in optical fibre
communication systems - Product specifications -
Part 14-1: Patch cords with EN 60793-2-50 single mode category B1.1 and
B1.3 fibre for category C



To be completed To be completed



This draft European Standard is submitted to CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2009-04-10.

It has been drawn up by CLC/TC 86BXA.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to
change without notice and shall not be referred to as a European Standard.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 15519 Ref. No. prEN 50377-14-1:2008 E

Draft for Enquiry

---------------------- Page: 3 ----------------------
oSIST prEN 50377-14-1:2009
prEN 50377-14-1:2008 – 2 –
1 Foreword
2 This draft European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic
3 interconnect, passive and connectorised components. It is submitted to the CENELEC enquiry.
4 This document is updated to include the performance of the patch cord. It also includes latest attenuation and
5 return loss grades as specified in IEC.
6 __________
Draft for Enquiry

---------------------- Page: 4 ----------------------
oSIST prEN 50377-14-1:2009
– 3 – prEN 50377-14-1:2008
Connector sets and interconnect components to be used in optical fibre communication systems –
Product specifications
Part 14-1: Patch cords with EN 60793-2-50 single mode category B1.1 and B1.3 fibre for category C
Description Performance
Fibre category: EN 60793-2-50 Application: For use in EN Category C
Types B1.1 and B1.3 (controlled environment)
Cable type: EN 60794-2-50 Attenuation grades: B: ≤ 0,12 dB mean
Type simplex cables (random mate)
≤ 0,25 dB for ≥ 97 %
of measurements

C: ≤ 0,25 dB mean
≤ 0,50 dB for ≥ 97 %
of measurements
 Return loss grade: 1: ≥ 60 dB
(random mate) 2: ≥ 45 dB
Related documents:
EN 50377 series Connector sets and interconnect components to be used in optical fibre
communication systems – Product specifications
EN 60793-2-50 Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres (IEC 60793-2-50)
EN 60794-2-50 Optical fibre cables – Part 2-50: Indoor optical fibre cables – Family specification for
simplex and duplex cables for use in terminated cable assemblies (IEC 60794-2-50)
EN 61300 series Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures (IEC 61300 series)
EN 61753-1 Fibre optic interconnecting devices and pas
...