iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60079-14:2009/AC:2011

(Corrigendum)

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

This part of IEC 60079 contains the specific requirements for the design, selection and erection of electrical installations in explosive gas atmospheres. These requirements are in addition to the requirements for installations in non-hazardous areas. This standard applies to all electrical equipment and installations in hazardous areas whether permanent, temporary, portable, transportable or hand-held. It applies to installations at all voltages.

Explosionsfähige Atmosphäre - Teil 14: Projektierung, Auswahl und Errichtung elektrischer Anlagen

Atmosphères explosives - Partie 14: Conception, sélection et construction des installations électriques

Eksplozivne atmosfere - 14. del: Načrtovanje, izbira in namestitev električnih inštalacij

Ta del IEC 60079 vsebuje nekatere zahteve za načrtovanje, izbiro in namestitev električnih inštalacij v eksplozivnih plinskih atmosferah. Te zahteve so dodatek zahtevam za vgradnjo v nenevarnih območjih. Ta standard velja za vso električno opremo in inštalacije v nevarnih območjih, bodisi stalno, začasno, prenosno, prenosljivo ali ročno. Velja za inštalacije vseh napetosti.

General Information

Status
Withdrawn
Publication Date
02-Nov-2011
Withdrawal Date
16-Jun-2016
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
91.140.50 - Electricity supply systems
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Jun-2016
Due Date
09-Jul-2016
Completion Date
17-Jun-2016
Ref Project
EN 60079-14:2008/AC:2011 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

Relations

Corrects
SIST EN 60079-14:2009 - Explosive atmospheres -- Part 14: Electrical installations design, selection and erection
Effective Date
01-Dec-2011
Replaced By
SIST EN 60079-14:2014 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection (IEC 60079-14:2013)
Effective Date
01-Sep-2016
Corrects
SIST EN 60079-14:2009 - Explosive atmospheres -- Part 14: Electrical installations design, selection and erection
Effective Date
28-Jan-2023
Replaced By
SIST EN 60079-14:2014 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection (IEC 60079-14:2013)
Effective Date
28-Jan-2023
Corrects
SIST EN 60079-14:2009 - Explosive atmospheres -- Part 14: Electrical installations design, selection and erection
Effective Date
07-Jun-2022

Buy Standard

EN 60079-14:2009/AC:2011EN 60079-14:2009/AC:2011
PreviousNext
Corrigendum
EN 60079-14:2009/AC:2011
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LQãWDODFLMExplosionsfähige Atmosphäre - Teil 14: Projektierung, Auswahl und Errichtung elektrischer AnlagenAtmosphères explosives - Partie 14: Conception, sélection et construction des installations électriquesExplosive atmospheres - Part 14: Electrical installations design, selection and erection91.140.50Sistemi za oskrbo z elektrikoElectricity supply systems29.260.20Electrical apparatus for explosive at
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60079-14:2014/AC:2016(Corrigendum)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 60079-14:2014/AC:2016

IEC corrigendum

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-14:2014(Main)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection (IEC 60079-14:2013)
EN 60079-14:2014

EN IEC 60079-14 contains the specific requirements for the design, selection, erection and initial inspection of electrical installations in, or associated with, explosive atmospheres. Where the equipment is required to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional protection requirements may be necessary. The requirements of this standard apply only to the use of equipment under standard atmospheric conditions as defined in IEC 60079-0. For other conditions, additional precautions may be necessary, and the equipment should be certified for these other conditions. For example, most flammable materials and many materials which are normally regarded as non-flammable might burn vigorously under conditions of oxygen enrichment. These requirements are in addition to the requirements for installations in non-hazardous areas. This standard applies to all electrical equipment including fixed, portable, transportable and personal, and installations, permanent or temporary. This standard does not apply to - electrical installations in mines susceptible to firedamp; No account is taken in this Standard of the toxic risks that are associated with flammable gases, liquids and dusts in concentrations that are usually very much less than the lower explosive limit. In locations where personnel may be exposed to potentially toxic concentrations of flammable material, appropriate precautions should be taken. Such precautions are outside the scope of this Standard.

  • Standard
    144 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-17:2014(Main)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 60079-17:2014

This part of the IEC 60079 series applies to users and covers factors directly related to the inspection and maintenance of electrical installations within hazardous areas only, where the hazard may be caused by flammable gases, vapours, mists, dusts, fibres or flyings. It does not include: - other fundamental installation and inspection requirements for electrical installations; - the verification of electrical equipment; - the repair and reclamation of explosion protected equipment (see IEC 60079-19). This standard supplements the requirements of IEC 60364-6. In the case of dusts, fibres or flyings the level of housekeeping may influence the inspection and maintenance requirements. This standard is intended to be applied where there can be a risk due to the presence of explosive gas or dust mixtures with air or combustible dust layers under normal atmospheric conditions. It does not apply to: - underground mining areas, - dusts of explosives that do not require atmospheric oxygen for combustion, - pyrophoric substances.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 60079-14:2023(Main)
Electrical installation design, selection and installation of equipment, including initial inspection
prEN IEC 60079-14:2023
  • Draft
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60079-17:2023(Main)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
FprEN IEC 60079-17:2023

This part of the IEC 60079 series applies to users and covers only those factors directly related to the inspection and maintenance of electrical installations specifically designed for hazardous areas, where the hazard may be caused by explosive gas or explosive dust atmospheres.
It does not include:
- other fundamental installation and inspection requirements for electrical installations;
- the verification of electrical equipment;
- protection or ventilation of rooms;
- gas detection systems;
- the repair and overhaul of explosion protected equipment (see IEC 60079-19).
While this standard does not include inspection of safety devices such as used in ventilated rooms (see 60079-13), this standard does include the requirements for inspection and maintenance of individual items of equipment that will be part of such systems, for example motors or sensors.
This standard supplements the requirements for inspection and testing in non-hazardous areas in IEC 60364-6.
NOTE 1 Standards applied at the date of installation might not have been IEC standards.
This standard is intended to be applied where there can be a risk due to the presence of explosive gas or dust mixtures with air or combustible dust layers under normal atmospheric conditions. It does not apply to:
- underground mining areas,
- dusts of explosives,
- pyrophoric substances.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-14:2014/AC:2016(Corrigendum)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 60079-14:2014/AC:2016

IEC corrigendum

  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-14:2014(Main)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection (IEC 60079-14:2013)
EN 60079-14:2014

EN IEC 60079-14 contains the specific requirements for the design, selection, erection and initial inspection of electrical installations in, or associated with, explosive atmospheres. Where the equipment is required to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional protection requirements may be necessary. The requirements of this standard apply only to the use of equipment under standard atmospheric conditions as defined in IEC 60079-0. For other conditions, additional precautions may be necessary, and the equipment should be certified for these other conditions. For example, most flammable materials and many materials which are normally regarded as non-flammable might burn vigorously under conditions of oxygen enrichment. These requirements are in addition to the requirements for installations in non-hazardous areas. This standard applies to all electrical equipment including fixed, portable, transportable and personal, and installations, permanent or temporary. This standard does not apply to - electrical installations in mines susceptible to firedamp; No account is taken in this Standard of the toxic risks that are associated with flammable gases, liquids and dusts in concentrations that are usually very much less than the lower explosive limit. In locations where personnel may be exposed to potentially toxic concentrations of flammable material, appropriate precautions should be taken. Such precautions are outside the scope of this Standard.

  • Standard
    144 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-17:2014(Main)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 60079-17:2014

This part of the IEC 60079 series applies to users and covers factors directly related to the inspection and maintenance of electrical installations within hazardous areas only, where the hazard may be caused by flammable gases, vapours, mists, dusts, fibres or flyings. It does not include: - other fundamental installation and inspection requirements for electrical installations; - the verification of electrical equipment; - the repair and reclamation of explosion protected equipment (see IEC 60079-19). This standard supplements the requirements of IEC 60364-6. In the case of dusts, fibres or flyings the level of housekeeping may influence the inspection and maintenance requirements. This standard is intended to be applied where there can be a risk due to the presence of explosive gas or dust mixtures with air or combustible dust layers under normal atmospheric conditions. It does not apply to: - underground mining areas, - dusts of explosives that do not require atmospheric oxygen for combustion, - pyrophoric substances.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 60079-14:2023(Main)
Electrical installation design, selection and installation of equipment, including initial inspection
prEN IEC 60079-14:2023
  • Draft
    143 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60079-17:2023(Main)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
FprEN IEC 60079-17:2023

This part of the IEC 60079 series applies to users and covers only those factors directly related to the inspection and maintenance of electrical installations specifically designed for hazardous areas, where the hazard may be caused by explosive gas or explosive dust atmospheres.
It does not include:
- other fundamental installation and inspection requirements for electrical installations;
- the verification of electrical equipment;
- protection or ventilation of rooms;
- gas detection systems;
- the repair and overhaul of explosion protected equipment (see IEC 60079-19).
While this standard does not include inspection of safety devices such as used in ventilated rooms (see 60079-13), this standard does include the requirements for inspection and maintenance of individual items of equipment that will be part of such systems, for example motors or sensors.
This standard supplements the requirements for inspection and testing in non-hazardous areas in IEC 60364-6.
NOTE 1 Standards applied at the date of installation might not have been IEC standards.
This standard is intended to be applied where there can be a risk due to the presence of explosive gas or dust mixtures with air or combustible dust layers under normal atmospheric conditions. It does not apply to:
- underground mining areas,
- dusts of explosives,
- pyrophoric substances.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day