Aerospace series - Bolt, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature)/425 °C

This document specifies the characteristics of bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated.
Classification: 1 250 MPa /425 °C .

Luft- und Raumfahrt - Sechskantschrauben, kurzes Gewinde, aus hochwarmfester Nickelbasislegierung, Aluminium-IVD-beschichtet - Klasse: 1 250 MPa (bei Raumtemperatur) / 425 °C

Série aérospatiale - Vis à tête hexagonale normale, fût à tolérance large, filetage court, en alliage résistant à chaud à base de nickel, revêtues aluminium IVD - Classification: 1 250 MPa (à température ambiante) / 425 °C

Le présent document spécifie les caractéristiques des vis à tête hexagonale normale, fût à tolérance large, filetage court, en alliage résistant à chaud base nickel, revêtues d'aluminium IVD.
Classification : 1 250 MPa /425 °C.

Aeronavtika - Sornik, normalna šestroba glava, široka toleranca, kratek navoj, iz toplotnoodporne zlitine na nikljevi osnovi, prevlečeni z aluminijem IVD - Klasifikacija: 1250 MPa (pri temperaturi okolice) / 425 °C

General Information

Status
Not Published
Public Enquiry End Date
05-May-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
03-Jan-2024
Due Date
22-May-2024

Relations

Buy Standard

Draft
prEN 4128:2024
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4128:2024
01-maj-2024
Aeronavtika - Sornik, normalna šestroba glava, široka toleranca, kratek navoj, iz
toplotnoodporne zlitine na nikljevi osnovi, prevlečeni z aluminijem IVD -
Klasifikacija: 1250 MPa (pri temperaturi okolice) / 425 °C
Aerospace series - Bolt, normal hexagonal head, coarse tolerance shank, short thread,
in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at
ambient temperature)/425 °C
Luft- und Raumfahrt - Sechskantschrauben, kurzes Gewinde, aus hochwarmfester
Nickelbasislegierung, Aluminium-IVD-beschichtet - Klasse: 1 250 MPa (bei
Raumtemperatur) / 425 °C
Série aérospatiale - Vis à tête hexagonale normale, fût à tolérance large, filetage court,
en alliage résistant à chaud à base de nickel, revêtues aluminium IVD - Classification: 1
250 MPa (à température ambiante) / 425 °C
Ta slovenski standard je istoveten z: prEN 4128
ICS:
49.025.20 Aluminij Aluminium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN 4128:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4128:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4128:2024


DRAFT
EUROPEAN STANDARD
prEN 4128
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2023
ICS 49.030.20 Will supersede EN 4128:2016
English Version

Aerospace series - Bolt, normal hexagonal head, coarse
tolerance shank, short thread, in heat resisting nickel base
alloy, aluminium IVD coated - Classification: 1 250 MPa (at
ambient temperature)/425 °C
Série aérospatiale - Vis à tête hexagonale normale, fût à Luft- und Raumfahrt - Sechskantschrauben, kurzes
tolérance large, filetage court, en alliage résistant à Gewinde, aus hochwarmfester Nickelbasislegierung,
chaud à base de nickel, revêtues aluminium IVD - Aluminium-IVD-beschichtet - Klasse: 1 250 MPa (bei
Classification: 1 250 MPa (à température ambiante) / Raumtemperatur) / 425 °C
425 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4128:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4128:2024
prEN 4128:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Configuration – Dimensions – Masses . 4
4.2 Materials .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.