iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61300-3-50:2013/AC:2015

(Corrigendum)

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-50: Untersuchungen und Messungen - Übersprechen bei räumlichen optischen Schaltern

Dispositifs d’interconnexion et composants passifs à fibres optiques - Procédures fondamentales d’essais et de mesures - Partie 3-50: Examens et mesures - Diaphonie relative aux commutateurs spatiaux optiques

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 3-50. del: Preiskave in meritve - Presluh pri optičnih prostorskih stikalih- Popravek

General Information

Status
Published
Publication Date
09-Sep-2015
ICS
33.180.20 - Fibre optic interconnecting devices
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Feb-2015
Due Date
18-Apr-2015
Completion Date
10-Sep-2015
Ref Project
EN 61300-3-50:2013/AC:2015 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches

Relations

Corrects
SIST EN 61300-3-50:2013 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
Effective Date
27-Jan-2015
Revised
kSIST FprEN IEC 61300-3-50:2025 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches
Effective Date
22-Jan-2023
SIST EN 61300-3-50:2013/AC:2015SIST EN 61300-3-50:2013/AC:2015
PreviousNext
Corrigendum
SIST EN 61300-3-50:2013/AC:2015
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-50: Untersuchungen und Messungen - Übersprechen bei räumlichen optischen SchalternDispositifs d’interconnexion et composants passifs à fibres optiques - Procédures fondamentales d’essais et de mesures - Partie 3-50: Examens et mesures - Diaphonie relative aux commutateurs spatiaux optiquesFibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61300-3-50:2013/AC:2015SIST EN 61300-3-50:2013/AC:2015en,fr,de01-oktober-2015SIST EN 61300-3-50:2013/AC:2015SLOVENSKI
STANDARD
IEC 61300-3-50:2013/COR1:2015 – 1 –
 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE ____________
IEC 61300-3-50 Edition 1.0
2013-05
FIBRE OPT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN IEC 61754-37:2026(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 37: Type MDC connector family (IEC 61754-37:2025)
EN IEC 61754-37:2025

IEC 61754-37:2025 defines the standard mechanical interface dimensions for the type MDC family of connectors.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50411-3-1:2025(Main)
Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-1: Wall or pole mounted box for splices, for category C and A
EN 50411-3-1:2025

1.1   Product definition
This document contains the dimensional, optical, mechanical and environmental performance requirements of a fully installed optical fibre wall or pole mounted box for up to 288 fibre splices, in order for it to be categorized as a European standard product.
The typical configuration is splicing of incoming fibres to optional splitters, connecting on the other side to outgoing fibres.
A box is a protective housing containing a fibre management system with splice trays of various fibre separation levels. The box can contain one or more of the following:
-   storage and routing for fibre and cable;
-   uncut fibre cable storage;
-   splice trays;
-   passive optical devices (optical splitters or WDM).
A box can be installed on a vertical indoor or outdoor surface above ground level. If the box is required to be relocatable with cables attached, the following additional tests are expected to be performed:
-   cable bending;
-   cable torsion.
This document specifies the number of splice trays and splice capacity for each fibre separation level. The maximum capacity is 288 splices. For housings with a higher number of splices, EN 50411 4 1 (street cabinets) can be used.
Boxes for fibre splice and patchcord connections are covered in EN 50411 3 4.
1.2   Operating environment
The tests selected, combined with the severity and duration, are representative of indoor and outside plant for above ground environments defined by EN IEC 61753 1:
-   category C: Controlled (indoor) environment;
-   category A: Aerial (outdoor above ground) environment.
1.3   Reliability
Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this document does not guarantee the reliability of the product. This is expected to be predicted using a recognized reliability assessment programme.
1.4   Quality assurance
Compliance with this document does not guarantee the manufacturing consistency of the product. This is expected to be maintained using a recognized quality assurance programme.
1.5   Allowed fibre and cable types
This box standard accommodates EN IEC 60793 2 50 single-mode fibres and EN IEC 60793 2 10 A1-OM2 to A1-OM5 and A1-OM1 multimode fibres and all EN 60794 series optical fibre cables with various fibre capacities, types and designs.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-2-5:2022/A1:2025(Amendment)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion (IEC 61300-2-5:2022/AMD1:2025)
EN IEC 61300-2-5:2022/A1:2025
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63267-3-61:2025(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces for enhanced macrobend multimode fibres - Part 3-61: Connector parameters of physically contacting 50 μm core diameter fibres - Non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for reference connection applications (IEC 63267-3-61:2025)
EN IEC 63267-3-61:2025

IEC 63267-3-61: 2025 defines the dimensional limits of an optical interface for reference connectors with 2,5 mm or 1,25 mm diameter cylindrical zirconia (ZrO2) ferrules necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled polished multimode reference connections as defined in IEC 63267-2-2. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic connector interface standards. One grade of reference connector, Rm1, is defined in this document. The reference connector is terminated to restricted IEC 60793-2-10 using A1-OM2b to A1‑OM5b fibre in 850 nm band only. The geometrical dimensions and tolerances of the specified reference connector have been developed primarily to limit the variation in measured attenuation between multiple sets of reference connectors, and therefore to reduce the variation in measured attenuation between an arbitrarily chosen reference connector when mated with a connector in the field or factory.
This first edition and the first edition of IEC 63267-2-2 cancel and replace the first edition of IEC 61755-6-2 published in 2018. This edition constitutes a technical revision. The document includes the following significant technical changes with respect to the previous edition:
a) Definition of a reference grade, Rm1 interface;
b) Inclusion of A1-OM2b to A1-OM5b fibres;
c) Updates to normative references;
d) The addition of Annex A, which describes the attenuation test limits of reference grade Rm1 connectors to grade Bm connectors;
e) A new Annex B that describes the allowable fibre undercut.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63267-3-81:2025(Main)
Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibre - Part 3-81: Connector parameters of physically contacting 50 μm core diameter fibres - Non-angled polyphenylene sulphide rectangular ferrules with a single row of 12, 8, 4, or 2 fibres for reference connector applications (IEC 63267-3-81:2025)
EN IEC 63267-3-81:2025

IEC 63267-3-81: 2025 defines the dimensional limits of an optical interface for reference connectors with rectangular ferrules necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled polished multimode reference connectors with rectangular ferrules intended to be used for attenuation measurements as defined in IEC 63267‑2‑2. Ferrule dimensions and features are contained in the IEC 61754 series of fibre optic interface standards.One grade of reference connector is defined in this document. The reference connector is terminated to restricted IEC 60793-2-10 A1-OM2b to A1-OM5b fibre at 850 nm band only. The geometrical dimensions and tolerances of the specified reference connector have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62074-1:2025(Main)
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification (IEC 62074-1:2025)
EN IEC 62074-1:2025

IEC 62074-1: 2025 applies to fibre optic wavelength division multiplexing (WDM) devices. These have all of the following general features:
- they are passive, in that they contain no optoelectronic or other transducing elements; however they can use temperature control only to stabilize the device characteristics; they exclude any optical switching functions;
- they have three or more ports for either the entry or exit of optical power, or both, and share optical power among these ports in a predetermined fashion depending on the wavelength;
- the ports are optical fibres, or optical fibre connectors.
This document establishes uniform requirements for the following:
- optical, mechanical and environmental properties.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) harmonization of terms and definitions with IEC TS 62627-09;
b) simplified classification, documentation and standardization system in Clause 4, and moving interface style to Annex H.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61300-3-46:2025(Main)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules (IEC 61300-3-46:2025)
EN IEC 61300-3-46:2025

IEC 61300-3-46:2025 provides a standard for the measurement of guide pin bore and fibre bore diameters for rectangular ferrules used in connectors specified in the IEC 61754 series. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of fibre bore measurement;
b) addition of force gauge method;
c) addition of Annex A on temperature dependence.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61754-13:2024/AC:2025(Corrigendum)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 13: Type FC-PC connector family (IEC 61754-13:2024/COR1:2025)
EN IEC 61754-13:2024/AC:2025-06
  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61754-36:2025(Main)
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 36: Type SAC connector family (IEC 61754-36:2025)
EN IEC 61754-36:2025

This document defines the standard mechanical interface dimensions for the type of SAC family of connectors.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62149-4:2023/A1:2025(Amendment)
Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2022/AMD1:2025)
EN IEC 62149-4:2023/A1:2025
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day