iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 438-2:1999

(Main)

Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988, modified)

Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988, modified)

Decorative high-pressure laminated sheet: A sheet consisting of layers of fibrous sheet material (for example paper) impregnated with thermosetting resins and bonded together by means of heat and a pressure of not less than 7 MPa*, a layer or layers on one or both sides having decorative colours or designs.

Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze - Teil 2: Bestimmung der Eigenschaften (ISO 4586-2:1988, modifiziert)

Dekorative Hochdruck-Schichpressstoffplatte: eine Platte bestehend aus Schichten Von Faserstoffbahnen (z. B. Papier), imprägniert mit härtbaren Harzen und bei hoher Temperatur und einem Druck Von nicht weniger als MPa (1 MPa = 1 MN/mm2), wobei die äussere Schicht oder die Schichten auf einer oder beiden Oberflächen dekorative Farben oder Designs tragen.

Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines thermodurcissables - Partie 2: Détermination des caractéristiques (ISO 4586-2:1988, modifiée)

Plaque de stratifié décoratif haute pression: plaque comportant des couches de matériaux fibreux sous forme de feuilles (par example papier) imprégnées de résines thermodurcissables et liées ensemble par l'action de la chaleur et d'une pression d'au moins 7 MPa (1), une ou pluisieurs couches sur l'une ou les deux faces de la plaque présentant des couleurs ou des dessins décoratifs.

Okrasni visokotlačni laminati (HPL) – Plošče iz duromerov - 2. del: Ugotavljanje lastnosti (ISO 4586-2:1988, modificiran)

General Information

Status
Withdrawn
Publication Date
30-Apr-1999
Withdrawal Date
30-Apr-2005
ICS
83.140.20 - Laminated sheets
Technical Committee
IPMA - Polimer materials and products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-May-2005
Due Date
01-May-2005
Completion Date
01-May-2005
Ref Project
EN 438-2:1991 - Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part 2: Determination of properties (ISO 4586-2:1988, modified)

Relations

Replaced By
SIST EN 438-2:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties
Effective Date
01-May-2005
Replaced By
SIST EN 438-3:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
Effective Date
22-Dec-2008
Replaced By
SIST EN 438-4:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater.
Effective Date
22-Dec-2008
Replaced By
SIST EN 438-7:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Effective Date
22-Dec-2008
Replaced By
SIST EN 438-5:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
Effective Date
22-Dec-2008
Replaced By
SIST EN 438-6:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater
Effective Date
22-Dec-2008
Replaced By
SIST EN 438-1:2005 - High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
Effective Date
22-Dec-2008

Buy Standard

EN 438-2:1999EN 438-2:1999
PreviousNext
Standard
EN 438-2:1999
English language
79 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 438-2:1999
01-maj-1999
2NUDVQLYLVRNRWODþQLODPLQDWL +3/ ±3ORãþHL]GXURPHURYGHO8JRWDYOMDQMH
ODVWQRVWL ,62PRGLILFLUDQ
Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins - Part
2: Determination of properties (ISO 4586-2:1988, modified)
Dekorative Hochdruck-Schichtpreßstoffplatten (HPL) - Platten auf Basis härtbarer Harze
- Teil 2: Bestimmung der Eigenschaften (ISO 4586-2:1988, modifiziert)
Stratifiés décoratifs haute pression (HPL) - Plaques a base de résines
thermodurcissables - Partie 2: Détermination des caractéristiques (ISO 4586-2:1988,
modifiée)
Ta slovenski standard je istoveten z: EN 438-2:1991
ICS:
83.140.20 /DPLQDWQHSORãþH Laminated sheets
SIST EN 438-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 438-2:1999

---------------------- Page: 2 ----------------------

SIST EN 438-2:1999

---------------------- Page: 3 ----------------------

SIST EN 438-2:1999

---------------------- Page: 4 ----------------------

SIST EN 438-2:1999

---------------------- Page: 5 ----------------------

SIST EN 438-2:1999

---------------------- Page: 6 ----------------------

SIST EN 438-2:1999

---------------------- Page: 7 ----------------------

SIST EN 438-2:1999

---------------------- Page: 8 ----------------------

SIST EN 438-2:1999

---------------------- Page: 9 ----------------------

SIST EN 438-2:1999

---------------------- Page: 10 ----------------------

SIST EN 438-2:1999

---------------------- Page: 11 ----------------------

SIST EN 438-2:1999

---------------------- Page: 12 ----------------------

SIST EN 438-2:1999

---------------------- Page: 13 ----------------------

SIST EN 438-2:1999

---------------------- Page: 14 ----------------------

SIST EN 438-2:1999

---------------------- Page: 15 ----------------------

SIST EN 438-2:1999

---------------------- Page: 16 ----------------------

SIST EN 438-2:1999

---------------------- Page: 17 ----------------------

SIST EN 438-2:1999

---------------------- Page: 18 ----------------------

SIST EN 438-2:1999

---------------------- Page: 19 ----------------------

SIST EN 438-2:1999

---------------------- Page: 20 ----------------------

SIST EN 438-2:1999

---------------------- Page: 21 ----------------------

SIST EN 438-2:1999

---------------------- Page: 22 ----------------------

SIST EN 438-2:1999

---------------------- Page: 23 ----------------------

SIST EN 438-2:1999

---------------------- Page: 24 ----------------------

SIST EN 438-2:1999

---------------------- Page: 25 ----------------------

SIST EN 438-2:1999

---------------------- Page: 26 ----------------------

SIST EN 438-2:1999

---------------------- Page: 27 ----------------------

SIST EN 438-2:1999

---------------------- Page: 28 ----------------------

SIST EN 438-2:1999

---------------------- Page: 29 ----------------------

SIST EN 438-2:1999

---------------------- Page: 30 ----------------------

SIST EN 438-2:1999

---------------------- Page: 31 ----------------------

SIST EN 438-2:1999

---------------------- Page: 32 ----------------------

SIST EN 438-2:1999

---------------------- Page: 33 ----------------------

SIST EN 438-2:1999

---------------------- Page: 34 ----------------------

SIST EN 438-2:1999

---------------------- Page: 35 ----------------------

SIST EN 438-2:1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19712-3:2022(Main)
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
EN ISO 19712-3:2022

This document specifies the methods of test for determination of the properties of solid surfacing
materials, as defined in Clause 3, in the form of shaped products. These methods are primarily intended
for testing the materials specified in ISO 19712-1.
The tests can be carried out on finished products, but are generally carried out on test panels of a size
sufficient to meet the requirements of the test, and of the same material and finish as the finished
product.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-2:2016+A1:2019(Amendment)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
EN 438-2:2016+A1:2018

This European Standard specifies the methods of test for determination of the properties of high-pressure decorative laminates as defined in Clause 3. These methods are primarily intended for testing the sheets specified in EN 438-3, EN 438-4, EN 438-5, EN 438-6, EN 438-8, and EN 438-9.
The precision of the test methods, specified in this European Standard, is not known because inter-laboratory data are not yet available. When inter-laboratory data will be obtained, precision statements will be added to the test method at the following revision. For those test methods having an end point determination based on subjective judgement, it is not meaningful to make a statement of precision.

  • Standard
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-8:2019(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 8: Classification and specifications for design laminates
EN 438-8:2018

This European Standard specifies performance requirements for design laminates intended for interior use with a design effect surface having a phenolic based core and a decorative surface, not covered by EN 438 3 [1], EN 438 4 [2], EN 438 5 [3] and EN 438 6 [5]. Three surface layer types (metal, wood veneer and pearlescent decor) are defined in this part of EN 438.
EN 438 2 specifies the test methods relevant to this part of EN 438.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-9:2018(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
EN 438-9:2017

This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438.
EN 438-2 specifies the test methods relevant to this part of EN 438.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-6:2016(Main)
High-pressure decorative (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
EN 438-6:2016

This Part of EN 438 applies to Exterior-grade Compact laminates of thickness 2 mm and greater thick produced by using an high pressure process. It specifies requirements for standard and flame-retardant laminates intended for use under outdoor weather conditions such as direct sunlight rain and frost. Two levels of performance are specified; one for moderate exterior conditions, and the other for severe exterior conditions. Laminates complying with this Part of EN 438 are referred to as Exterior-grade Compact laminates, and are characterized by their high tensile strength, high impact resistance, thermal shock resistance, and resistance to weather and corrosion. They are available in a variety of decorative colours, with high resistance to colour change and aging in outdoor applications. When they are self-supporting Exterior-grade Compact laminates are ready for installation, and only require cutting to size, drilling, etc. to suit the application. EN 438-2 specifies the methods of test relevant to this part of EN 438.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-1:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
EN 438-1:2016

This part of EN 438 gives an overview of the standard as well as guidance on the selection and application of test methods and specifications contained in Parts 2 to 9 of EN 438.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-5:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-5:2016

This Part of EN 438 applies to five classes of flooring grade laminates less than 2 mm thick produced by using an high pressure process, intended for bonding to supporting substrates, to produce HPL flooring elements. For laminate floor covering applications they meet the surface property requirements specified in EN 13329.
High-pressure decorative flooring laminates are characterised by their high resistance to abrasion, aesthetic qualities and durability. They have good hygienic and anti-static properties and are easy to clean and maintain.
The requirements in this document apply only to the high-pressure laminate, and additional properties will need to be specified in order to define the functional performance of the finished flooring product.
This Part of EN 438 applies only to decorative laminates as defined in Clause 3.
EN 438-2 specifies the methods of test relevant to this part of EN 438.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-4:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
EN 438-4:2016

This Part of EN 438 specifies performance requirements for two types of compact laminate of thickness 2 mm or greater produced by using an high pressure process intended for interior use .
High-pressure decorative Compact laminates are characterised by their aesthetic qualities, strength, durability and functional performance. Compact HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are extremely strong, and resistant to wear, impact, scratching, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain.
EN 438-2 specifies the methods of test relevant to this part of EN 438.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 438-3:2016(Main)
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-3:2016

This European Standard applies to laminates less than 2 mm thick produced by using an high
pressure process, normally intended for bonding to supporting substrates to produce HPL
composite panels and establishes a classification system for high-pressure decorative laminates
according to their performance and main recommended fields of application, including materials
with special characteristics, for example formability or defined reaction to fire. This European
Standard also specifies requirements for the properties of the various types of laminates
covered by this classification system.
High-pressure decorative laminates are characterised by their qualities, durability and
functional performance. HPL sheets are available in a wide variety of colours, patterns and
surface finishes; they are resistant to wear, scratching, impact, moisture, heat and staining; and
possess good hygienic and anti-static properties, being easy to clean and maintain.
EN 438-2 specifies the methods of test relevant to this European Standard. EN 438-4, EN 438-5,
EN 438-6, EN 438-7, EN 438-8 and EN 438-9 are reserved for special types of HPL materials.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13894-1:2015(Main)
High-pressure decorative laminates - Composite elements - Part 1: Test methods (ISO 13894-1:2000)
EN ISO 13894-1:2015

This part of ISO 13894 specifies the methods of test for determination of the properties of composite elements
surfaced, and possibly edged, with high-pressure decorative laminate (HPDL) as defined in clause 3.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day