iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 1999-2:2002

(Main)

Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue

Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue

This Part 2 gives the basis for the design of aluminium alloy structures with respect to the limit state of fatigue induced fracture. Design for other limit states is covered in Part 1. This Part 2 gives rules for design by the following methods: - safe life; - damage tolerance; - design by testing. This Part 2 contains the manufacturing quality requirements necessary to ensure that the design assumptions are met in practice.

Eurocode 9: Bemessung und Konstruktion von Aluminiumbauten - Teil 2: Ermüdungsanfällige Tragwerke

Eurocode 9: Calcul des structures en aluminium - Partie 2: Structures sensibles a la fatigue

Eurocode 9 - Projektiranje konstrukcij iz aluminijevih zlitin - 2. del: Konstrukcije, občutljive na utrujanje

General Information

Status
Withdrawn
Publication Date
30-Sep-2002
Withdrawal Date
07-May-2007
ICS
91.010.30 - Technical aspects
91.080.17 - Aluminium structures
Technical Committee
KON - Structures
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-May-2007
Due Date
30-May-2007
Completion Date
08-May-2007
Directive
89/106/EEC - Construction products
Mandate
M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
Ref Project
ENV 1999-2:1998 - Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue

Relations

Replaced By
SIST EN 1999-1-3:2007 - Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
Effective Date
01-Oct-2007
Replaced By
SIST EN 1999-1-4:2007 - Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
Effective Date
01-May-2007
Replaced By
SIST EN 1999-1-5:2007 - Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
Effective Date
01-May-2007

Buy Standard

ENV 1999-2:2002ENV 1999-2:2002
PreviousNext
Cover page + National Annex and/or Forword
ENV 1999-2:2002
Foreword and/or annex in Slovenian language, body of the standard in English language
94 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST ENV 1999-2
prva izdaja
PREDSTANDARD
oktober 2002












Eurocode 9 - Projektiranje konstrukcij iz aluminijevih zlitin - 2. del:
Konstrukcije, občutljive na utrujanje
(prevzet ENV 1999-2:1998 z metodo platnice)

Eurocode 9 - Design of aluminium structures - Part 2: Structures suspectible to
fatigue

Eurocode 9 - Conception et dimensionnement des structures en aluminium -
Partie 2: Structures sensibles à la fatigue

Eurocode 9 - Bemessung und Konstruktion von Aluminiumbauten - Teil 2:
Ermündungsfällige Tragwerke













Deskriptorji: gradbeništvo, jeklena konstrukcija, aluminij, aluminijasta konstrukcija,
projektiranje, predpisi za gradnjo, računanje, mehanska trdnost




Referenčna številka
ICS 91.010.30; 91.080.10 SIST ENV 1999-2:2002 ((sl),en)


Nadaljevanje na straneh od II do IV in od 1 do 90



© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 1999-2 : 2002
NACIONALNI UVOD
Predstandard SIST ENV 1999-2 ((sl),en), Eurocode 9 - Projektiranje konstrukcij iz aluminijevih zlitin -
2. del: Konstrukcije, občutljive na utrujanje, prva izdaja, 2002, ima status slovenskega predstandarda
in je z metodo platnice prevzet evropski predstandard ENV 1999-2 (en), Eurocode 9 - Design of
aluminium structures - Part 2: Structures suspectible to fatigue, May 1998.
NACIONALNI PREDGOVOR
Evropski predstandard ENV 1999-2:1998 je pripravil tehnični odbor Evropskega komiteja za
standardizacijo CEN/TC 250 Konstrukcijski Evrokodi.
Odločitev za prevzem tega predstandarda po metodi platnice je sprejela delovna skupina WG 9
Aluminijaste konstrukcije, ki je pripravila tudi nacionalni dokument za uporabo v Sloveniji, potrdil pa
tehnični odbor TC KON Konstrukcije.
Ta slovenski predstandard se lahko uporablja samo v skladu z nacionalnim dokumentom, ki je
sestavni del SIST ENV 1999-2:2002.
Ta slovenski predstandard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1999-1-3:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2023

1.1 Scope of EN 1999-1-3
(1) This document gives the basis for the design of aluminium alloy structures subject to fatigue in the ultimate limit state.
(2) This document gives rules for:
- safe life design;
- damage tolerant design;
- design assisted by testing.
(3) This document does not cover pressurized containment vessels or pipework.
1.2 Assumptions
(1) The general assumptions of EN 1990 apply.
(2) The provisions of EN 1999-1-1 apply.
(3) EN 1999-1-3 is intended to be used in conjunction with EN 1990, EN 1991 (all parts), relevant parts in EN 1992 to EN 1999, EN 1090-1 and EN 1090-3 for requirements for execution, and ENs, EADs and ETAs for construction products relevant to aluminium structures.

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-1:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
EN 1999-1-1:2023

EN 1999 applies to the design of buildings and civil engineering and structural works made of aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 – Basis of structural design.
EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.
EN 1999 is intended to be used in conjunction with:
—   EN 1990 Basis of structural design
—   EN 1991 Actions on structures
—   European Standards for construction products relevant for aluminium structures
—   EN 1090-1: Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
—   EN 1090-3: Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures.
EN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys.
The following limits are recommended – if not otherwise explicitly stated in this standard:
   components with material thickness not less than 0,6 mm;
   welded components with material thickness not less than 1,5 mm;
   connections with:
—   steel bolts and pins with diameter not less than 5 mm;
—   aluminium bolts and pins with diameter not less than 8 mm;
—   rivets and thread forming screws with diameter not less than 3,9 mm

  • Standard
    371 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    364 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-5:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2023

1.1   Scope of EN 1999 1 5
(1)   EN 1999 1 5 applies to the structural design of aluminium structures, stiffened and unstiffened, that have the form of a shell of revolution or of a round panel in monocoque structures.
(2)   EN 1999 1 5 covers additional provisions to those given in the relevant parts of EN 1999 for design of aluminium structures.
NOTE    Supplementary information for certain types of shells is given in EN 1993 1 6 and the relevant application parts which include:
-   Part 3-1 for towers and masts;
-   Part 3-2 for chimneys;
-   Part 4-1 for silos;
-   Part 4-2 for tanks;
-   Part 4-3 for pipelines.
(4)   The provisions in EN 1999 1 5 apply to axisymmetric shells (cylinders, cones, spheres) and associated circular or annular plates, beam section rings and stringer stiffeners, where they form part of the complete structure.
(5)   Single shell panels (cylindrical, conical or spherical) are not explicitly covered by EN 1999 1 5. However, the provisions can be applicable if the appropriate boundary conditions are duly taken into account.
(6)   Types of shell walls covered in EN 1999 1 5 can be (see Figure 1.1):
-   shell wall constructed from flat rolled sheet with adjacent plates connected with butt welds, termed ‘isotropic’;
-   shell wall with lap joints formed by connecting adjacent plates with overlapping sections, termed lap-jointed;
-   shell wall with stiffeners attached to the outside, termed ‘externally stiffened’ irrespective of the spacing of stiffeners;
-   shell wall with the corrugations running up the meridian, termed ‘axially corrugated’;
-   shell wall constructed from corrugated sheets with the corrugations running around the shell circumference, termed ‘circumferentially corrugated’.
(7)   The provisions of EN 1999 1 5 are intended to be applied within the temperature range defined in EN 1999 1 1. The maximum temperature is restricted so that the influence of creep can be neglected. For structures subject to elevated temperatures associated with fire see EN 1999 1 2.
(8)   EN 1999 1 5 does not cover the aspect of leakage.
1.2   Assumptions
(1)   The general assumptions of EN 1990 apply.
(2)   The provisions of EN 1999 1 1 apply.
(3)   The design procedures are valid only when the requirements for execution in EN 1090 3 or other equivalent requirements are complied with.
(4)   For the design of new structures, prEN 1999 (all parts) is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997 and EN 1998.
(5)   EN 1999 (all parts) is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090 1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
-   EN 1090 3: Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-4:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2023

1.1   Scope of EN 1999-1-4
(1)P   This document gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sheet or strip that have been cold-formed by such processes as cold-rolled forming or press-breaking.
NOTE 1   The rules in this part complement the rules in other parts of EN 1999-1.
NOTE 2    The execution of aluminium structures made of cold-formed structures for roof, ceiling, floor and wall applications is covered in EN 1090-5.
(2)   This document gives methods for stressed-skin design using aluminium sheeting as a structural diaphragm.
(3)   This document does not apply to cold-formed aluminium profiles like C- and Z- profiles nor cold-formed and welded circular or rectangular hollow sections.
(4)   This document gives methods for design by calculation and for design assisted by testing. The methods for the design by calculation apply only within stated ranges of material properties and geometrical properties for which sufficient experience and test evidence is available. These limitations do not apply to design by testing.
(5)   This document does not cover load arrangement for loads during execution and maintenance.
1.2   Assumptions
(1) For the design of new structures, prEN 1999 (all parts) is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997 and EN 1998.
EN 1999 (all parts) is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090-1: Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
-   EN 1090-5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-2:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2023

1.1   Scope of EN 1999-1-2
(1)   EN 1999-1-2 deals with the design of aluminium structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1999-1-1, EN 1999-1-2, EN 1999-1-3, EN 1999-1-4 and EN 1999-1-5. This document only identifies differences from, or supplements to, normal temperature design.
(2)   EN 1999-1-2 applies to aluminium structures required to fulfil a load bearing function.
(3)   EN 1999-1-2 gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(4)   EN 1999-1-2 applies to structures, or parts of structures, that are within the scope of EN 1999 1 1 and are designed accordingly.
(5)   The methods given in EN 1999-1-2 are applicable to the following aluminium alloys:
EN AW-3004 - H34   EN AW-5083 - O and H12   EN AW-6063 - T5 and T6
EN AW-5005  -  O and H34   EN AW-5454 - O and H34   EN AW-6082 - T4 and T6
EN AW-5052  - H34      EN AW-6061 - T6   
(6)   The methods given in EN 1999-1-2 are applicable also to other aluminium alloy/tempers of EN 1999 1-1, if reliable material properties at elevated temperatures are available or the simplified assumptions in 5.2.1 are applied.
1.2   Assumptions
(1)   In addition to the general assumptions of EN 1990, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation.
-   any active and passive fire protection systems taken into account in the design will be adequately maintained.
(2)   For the design of new structures, EN 1999 is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997, EN 1998 and EN 1999.
(3)   EN 1999 is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
-   EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-1:2007/A2:2014(Amendment)
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1:2007/A2:2013

EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards for construction products relevant for aluminium structures - prEN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components5 - prEN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures5 EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.

  • Amendment
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-3:2007/A1:2012(Amendment)
Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3:2007/A1:2011

(1) EN 1999-1-3 gives the basis for the design of aluminium alloy structures with respect to the limit state of fracture induced by fatigue.
(2) EN 1999-1-3 gives rules for:
-   Safe life design;
-   damage tolerant design;
-   design assisted by testing.
(3) EN 1999-1-3 is intended to be used in conjunction with EN 1090-3 "Technical requirements for the execution of aluminium structures" which contains the requirements necessary for the design assumptions to be met during execution of components and structures.
(4) EN 1999-1-3 does not cover pressurised containment vessels or pipe-work.

  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-4:2007/A1:2012(Amendment)
Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2007/A1:2011

EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards construction products relevant for aluminium structures - EN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components5 - EN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures5 EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-4:2007/AC:2010(Corrigendum)
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-4:2007/AC:2009

EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. EN 1999 is intended to be used in conjunction with: - EN 1990 "Basis of structural design" - EN 1991 "Actions on structures" - European Standards construction products relevant for aluminium structures - EN 1090-1: Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components5 - EN 1090-3: Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures5 EN 1999 is subdivided in five parts: EN 1999-1-1 Design of Aluminium Structures: General structural rules. EN 1999-1-2 Design of Aluminium Structures: Structural fire design. EN 1999-1-3 Design of Aluminium Structures: Structures susceptible to fatigue. EN 1999-1-4 Design of Aluminium Structures: Cold-formed structural sheeting. EN 1999-1-5 Design of Aluminium Structures: Shell structures.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-5:2007/AC:2010(Corrigendum)
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 1999-1-5:2007/AC:2009

TC - Modifications to Subclauses A.1.3.1, A.1.3.2 and A.1.4.2 in the E mother reference version.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day