iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60512-23-3:2002

(Main)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

Defines a standard test method for measuring the shielding effectiveness of a connector, or a connector fitted with an accessory and terminated with a cable. The complete assembly has a continuous 360° shielding capability throughout its length.

Elektrisch-mechanische Bauelemente für elektronische Einrichtungen - Meß- und Prüfverfahren -- Teil 23-3: Prüfung 23c: Schirmwirkung von Steckverbindern und Zubehör

Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure -- Partie 23-3: Essai 23c: Efficacité de blindage des connecteurs et des accessoires

Définit une méthode de mesure de l'efficacité de blindage d'un connecteur, ou d'un connecteur muni d'un accessoire et raccordé à un câble. L'ensemble complet doit avoir un blindage continu de 360° sur toute sa longueur.

Electromechanical components for electronic equipment - Basic testing procedure and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories (IEC 60512-23-3:2000)

General Information

Status
Published
Publication Date
31-Aug-2002
ICS
31.220.10 - Plug-and-socket devices. Connectors
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002
Ref Project
EN 60512-23-3:2001 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

Relations

Replaced By
SIST EN IEC 60512-23-3:2019 - Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method (IEC 60512-23-3:2018)
Effective Date
05-Mar-2019
Revised
SIST EN IEC 60512-23-3:2019 - Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method (IEC 60512-23-3:2018)
Effective Date
28-Feb-2017

Buy Standard

EN 60512-23-3:2002EN 60512-23-3:2002
PreviousNext
Standard
EN 60512-23-3:2002
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-23-3:2002
01-september-2002
Electromechanical components for electronic equipment - Basic testing procedure
and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of
connectors and accessories (IEC 60512-23-3:2000)
Electromechanical components for electronic equipment - Basic testing procedures and
measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and
accessories
Elektrisch-mechanische Bauelemente für elektronische Einrichtungen - Meß- und
Prüfverfahren -- Teil 23-3: Prüfung 23c: Schirmwirkung von Steckverbindern und
Zubehör
Composants électromécaniques pour équipements électroniques - Procédures d'essai
de base et méthodes de mesure -- Partie 23-3: Essai 23c: Efficacité de blindage des
connecteurs et des accessoires
Ta slovenski standard je istoveten z: EN 60512-23-3:2001
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-23-3:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-23-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 175301-803:2007(Main)
Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
EN 175301-803:2006

This standard covers a range of rectangular with flat contacts, 0,8 mm thickness, locking screw not detachable, intended for use in industrial installations for connections or termination of sub-assemblies of components in electrical equipment in measuring, regulating and control circuits, in equipment for power supply, in fluid and air power and components and other electronic devices employing similar techniques.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62197-1:2006(Main)
Connectors for electronic equipment - Quality assessment requirements -- Part 1: Generic specification
EN 62197-1:2006

This part of IEC 62197 establishes uniform testing requirements to support quality assessment procedures for connectors. This part of IEC 62197 is applicable to a family of connectors for use in electronic and electrical equipment; connectors designed for use at radio frequencies are not covered.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-2:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
EN 60512-14-2:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the effectiveness of seals against gas pressure differentials.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-4:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof
EN 60512-14-4:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the effectiveness of the sealing of a connector against ingress of water under specified conditions of pressure and time.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-5:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
EN 60512-14-5:2006

This part of IEC 60512, when required by the detail specification, is used for testing l connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the effectiveness of the sealing of a connector against ingress of water by exposure to low pressure whilst immersed in a salt solution. It is particularly, but not exclusively, suitable for mated connector assemblies.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-14-6:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing
EN 60512-14-6:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors. It may also be used for similar devices when specified in a detail specification. It is particularly, but not exclusively, suitable for connectors with removable contacts. The object of this document is to detail a standard test method to assess the effectiveness of the interfacial sealing of a connector against ingress of water by exposure to low pressure whilst immersed in a salt solution. It is intended to assess the effectiveness of the interfacial sealing means of connectors. Further, if any wires or contacts are not fitted, it assesses the sealing of one cavity of a connector from another.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-12-1:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
EN 60512-12-1:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. They may also be used for similar devices when specified in a detail specification. The object of this test is to detail a standard test method to assess the solderability of the terminations of a connector designed for use with printed boards or for other applications using similar soldering techniques.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61076-1:2006(Main)
Connectors for electronic equipment - Product requirements -- Part 1: Generic specification
EN 61076-1:2006

This part of IEC 61076 establishes uniform specifications and technical information for connectors. This part of IEC 61076 is applicable to a family of connectors for use in electronic and electrical equipment; connectors designed for use at radio frequencies are not covered.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-12-2:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
EN 60512-12-2:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to detail a standard test method to assess the solderability of the terminations of a connector that are designed to be soldered with a soldering iron and the soldering bath test method of IEC 60512-12-1 is not appropriate.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60512-12-3:2006(Main)
Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
EN 60512-12-3:2006

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to define a standard test method to assess the ability of the terminations of a connector to remain covered with solder when being brought into contact with molten solder under specified conditions.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day