SIST EN 60317-30:2001/A2:2006

55/926/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJET DE COMITÉ POUR VOTE (CDV)

Project number IEC 60317-30, A2 Ed. 1
Numéro de projet
IEC/TC or SC: Date of circulation Closing date for voting (Voting
TC 55
Date de diffusion mandatory for P-members)
CEI/CE ou SC:

Date de clôture du vote (Vote
2004-11-19
obligatoire pour les membres (P))
2005-04-22
Titre du CE/SC: Fils de bobinage TC/SC Title: Winding Wires
Secretary: M. LEIBOWITZ - USA
       E-Mail: mik_leibowitz@nema.org
Also of interest to the following committees Supersedes document
Intéresse également les comités suivants Remplace le document
   55/852/CD 55/880/CC
Functions concerned
Fonctions concernées
Safety EMC Environment Quality assurance
Sécurité
CEM Environnement Assurance qualité
CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT
MODIFICATION. IL NE PEUT SERVIR DE RÉFÉRENCE. SHOULD NOT BE USED FOR REFERENCE PURPOSES.
LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR
PRÉSENTER, AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF
DROITS DE PROPRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING
CONNAISSANCE ET À FOURNIR UNE DOCUMENTATION EXPLICATIVE. DOCUMENTATION.



Titre : Amendement 2 de IEC 60317-30, Ed. 1: Title : Amendment 2 to IEC 60317-30, Ed. 1:
Spécifications pour types particuliers de fils de Specifications for particular types of winding
bobinage – Partie 30: Fil de section wire - Part 30: Polyimide enamelled rectangular
rectangulaire en cuivre émaillé avec polyimide, copper wire, class 220
classe 220



Note d'introduction Introductory note


ATTENTION ATTENTION

CDV soumis en parallèle au vote (CEI) Parallel IEC CDV/CENELEC Enquiry
et à l’enquête (CENELEC)

Copyright © 2004 International Electrotechnical Commission, IEC. All rights reserved. It is
permitted to download this electronic file, to make a copy and to print out the content for the sole
purpose of preparing National Committee positions. You may not copy or "mirror" the file or
printed version of the document, or any part of it, for any other purpose without permission in
writing from IEC.
FORM CDV (IEC)
2002-08-09

---------------------- Page: 1 ----------------------

2
60317-30, A2 Ed. 2 © IEC
INTERNATIONAL ELECTROTECHNICAL COMMISSION

________

SPECIFICATIONS FOR PARTICULAR TYPES
OF WINDING WIRES –
Part 30: Polyimide enamelled rectangular copper wire,
class 220





FOREWORD

1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
3) In order to promote international unification, the IEC expresses the wish that all National Committees should
adopt the text of the IEC recommendation for their national rules in so far as national conditions will permit. Any
divergence between the IEC recommendation and the corresponding national rules should, as far as possible, be
clearly indicated in the latter.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent pos
...