SIST EN 300 476-3 V1.2.1:2003
(Main)Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)
- Abstract
Version 2 of the PICS for voluntary testing of ETS 300 175. This update corrects errors which were found during the implementation of the first edition of this document (ETS 300 476-1) and alignment with the second edition of ETS 300 175.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
- Mandate
- T-292
SIST EN 300 476-3 V1.2.1:2003 is a Slovenian standard from SIST that corresponds to ETSI EN 300 476-3 Version 1.2.1. It specifies a Protocol Implementation Conformance Statement (PICS) proforma for the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) Medium Access Control (MAC) layer at the Portable radio Termination (PT). In practice, it gives suppliers a standard way to state which MAC capabilities, procedures, timers, parameters and messages their PT implementation supports.
What does SIST EN 300 476-3 V1.2.1:2003 specify?
SIST EN 300 476-3 V1.2.1:2003 specifies the PICS proforma for the DECT MAC layer at the PT, in line with EN 300 175-3 and the conformance-testing approach of ISO/IEC 9646-7. It is described as version 2 of the PICS for voluntary testing of ETS 300 175, and it updates the first edition by correcting implementation errors and aligning with the second edition of ETS 300 175.
| Annex | What it covers |
|---|---|
| Annex A | The normative PICS proforma for DECT MAC PT, including completion guidance, identification, capabilities, parameters and messages |
The document is organized into a short main body and one normative annex. Clause 1 gives the scope, clause 2 lists the references, clause 3 gives definitions and abbreviations, clause 4 gives the conformance requirement, and Annex A contains the questionnaire itself.
What are the key requirements of SIST EN 300 476-3 V1.2.1:2003?
Clause 4 requires the supplier of a protocol implementation that claims conformance to the PT-specific requirements of EN 300 175-3 to complete the PICS proforma in Annex A. That matters because this standard is about declared support, not a test result report: the supplier must identify the implementation and explain its capabilities clearly enough for verification.
Identification and conformance statement
Annex A.2 to A.4 ask for the date of statement, IUT and SUT identification, supplier details, client details, and a contact person. Annex A.4 also requires a global statement saying whether all mandatory capabilities are implemented. In practice, this gives test labs and buyers a single place to see what exact product version is being declared and whether the supplier claims full mandatory conformance.
Service support
Annex A.5.1 covers support for connection-oriented control, broadcast control, connectionless control, multiplexing and management services. Several service groups require at least one supported option, such as the different connection-oriented, connectionless and bearer types. This tells a reader which traffic patterns the PT can handle, such as duplex or simplex use, paging, broadcast and management functions.
Procedures and operating behavior
Annex A.5.2 covers connection setup, modification, data transfer, handover, release, broadcast procedures, connectionless procedures and layer management procedures. The tables separate basic, advanced, symmetric, asymmetric, PT-initiated and FT-initiated cases. In practice, these entries show which call-control, mobility and bearer-management flows must be exercised during conformance testing.
Timers, constants and radio parameters
Annex A.6 asks for timer support, protocol constants, channel selection parameters, supported channels, bearer types and slot types. It also covers supported modes in the Idle_locked state and whether extended RF carriers are supported. This is the part a tester uses to check timing behavior and the radio resource combinations the implementation can actually use.
Messages and field formats
Annex A.7 and A.8 cover message support and the exact message layouts and field values. The annex distinguishes A-field, B-field, NT, QT, PT, MT and other message groups, and it separates sending and receiving support. That matters because interoperability depends not only on whether a message exists, but on whether the implementation can parse, transmit and interpret each defined field correctly.
What terms does SIST EN 300 476-3 V1.2.1:2003 define?
- Implementation Conformance Statement (ICS) - A statement from a supplier that says which capabilities an implementation supports.
- ICS proforma - A questionnaire that becomes an ICS when it is completed for a specific implementation.
- Protocol Implementation Conformance Statement (PICS) - An ICS focused on protocol support for a specification.
- Implementation Under Test (IUT) - The implementation whose conformance is being declared or checked.
- System Under Test (SUT) - The wider system that contains the IUT and is being identified for the statement.
- Portable radio Termination (PT) - The DECT portable side covered by this PICS proforma.
- Fixed radio Termination (FT) - The fixed side used as the counterpart in the message and procedure tables.
Who uses SIST EN 300 476-3 V1.2.1:2003?
Suppliers of DECT PT implementations use this standard to complete a conformance statement for the MAC layer. Test laboratories use it to compare declared support with the required PT behaviors and message handling. Quality managers and procurement teams use it to check whether a product covers the DECT MAC functions they need, especially when voluntary testing against ETS 300 175 is involved.
What changed in SIST EN 300 476-3 V1.2.1:2003 from the previous edition?
This edition is presented as version 2 of the PICS for voluntary testing of ETS 300 175. It corrects errors found during implementation of the first edition, ETS 300 476-1, and aligns the content with the second edition of ETS 300 175.
Which standards are used with SIST EN 300 476-3 V1.2.1:2003?
- EN 300 175-1 - Provides the DECT overview and the general terms used in the document.
- EN 300 175-3 - Defines the DECT MAC layer requirements that the PICS proforma refers to.
- ISO/IEC 9646-1 - Provides the general conformance-testing concepts and ICS terminology.
- ISO/IEC 9646-7 - Provides the rules for Implementation Conformance Statements and their proformas.
What does the SIST EN 300 476-3 V1.2.1:2003 document contain?
Annex A contains structured tables for identification, service support, procedures, timers, constants, channels, bearer types, slot types and message support. It also contains detailed message-format tables for A-field, B-field, QT, PT, MT and other DECT MAC messages, including separate entries for sending and receiving directions. The tables are designed for completion by a supplier and for use in conformance testing, documentation review and implementation comparison.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 476-3 V1.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)". This standard covers: Version 2 of the PICS for voluntary testing of ETS 300 175. This update corrects errors which were found during the implementation of the first edition of this document (ETS 300 476-1) and alignment with the second edition of ETS 300 175.
Version 2 of the PICS for voluntary testing of ETS 300 175. This update corrects errors which were found during the implementation of the first edition of this document (ETS 300 476-1) and alignment with the second edition of ETS 300 175.
SIST EN 300 476-3 V1.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 476-3 V1.2.1:2003 is associated with the following European legislation: Standardization Mandates: T-292. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 476-3 V1.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access Control (MAC) layer - Portable radio Termination (PT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 476-3 Version 1.2.1SIST EN 300 476-3 V1.2.1:2003en01-december-2003SIST EN 300 476-3 V1.2.1:2003SLOVENSKI
STANDARD
ETSIEN300476-3V1.2.1(2000-11)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma;Part3:MediumAccessControl(MAC)layer-PortableradioTermination(PT)SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)2ReferenceREN/DECT-040106-3Keywordsaccess,DECT,PICS,radio,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)3ContentsIntellectualPropertyRights.8Foreword.81Scope.92References.93Definitionsandabbreviations.93.1Definitions.93.2Abbreviations.104ConformancerequirementtothisPICSproformaspecification.10AnnexA(normative):PICSproformaforDECTMACPT.11A.1IntroductionforcompletingthePICSproforma.11A.1.1Purposesandstructure.11A.1.2Symbols,abbreviationsandconventions.11A.1.3GuidancesforcompletingthePICS.12A.2Identificationoftheimplementation.13A.2.1Dateofstatement.13A.2.2ImplementationUnderTest(IUT)identification.13A.2.3SystemUnderTest(SUT)identification.13A.2.4Productsupplier.13A.2.5Clientidentification.14A.2.6Contactperson.14A.3Identificationoftheprotocol.14A.4Globalstatementofconformance.14A.5Capabilities.15A.5.1Services.15A.5.1.1Connectionorientedcontrolservices.15A.5.1.2Broadcastcontrolservices.16A.5.1.3Connectionlesscontrolservices.16A.5.1.3.1Downlinkconnectionlessservices.16A.5.1.3.2Uplinkconnectionlessservices.17A.5.1.4Multiplexingservices.17A.5.1.5Managementservices.18A.5.2Procedures.18A.5.2.1Connectionprocedures.19A.5.2.1.1Connectionsetupprocedures.19A.5.2.1.2Connectionmodificationprocedures.20A.5.2.1.3Connectiondatatransferprocedures.20A.5.2.1.4Handoverprocedures.21A.5.2.1.5Connectionreleaseprocedures.21A.5.2.1.6ProceduresforFTconnectionswithCRFP.21A.5.2.2Broadcastprocedures.21A.5.2.3Connectionlessprocedures.22A.5.2.3.1Downlinkconnectionlessprocedures.22A.5.2.3.2Uplinkconnectionlessprocedures.22A.5.2.4CSFmultiplexingprocedures.22A.5.2.5Layermanagementprocedures.22A.5.3Othercapabilities.23A.6Protocolparameters.23A.6.1Timersupport.23A.6.2Protocolconstants.24SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)4A.6.3Channelselectionparameters.24A.6.4Channelssupported.24A.6.5Bearertypessupported.25A.6.6Slottypessupported.25A.7Messages.25A.7.1A-fieldheader.25A.7.1.1A-fieldheader-TailIdentification.25A.7.1.2A-fieldheader-"Q1/BCK"bit.26A.7.1.3A-fieldheader-B-fieldidentification.26A.7.1.4A-fieldheader-"Q2"bit.27A.7.2A-fieldidentitiesinformation(NT)message.27A.7.3A-fieldsysteminformation(QT)messages.28A.7.4A-fieldpagingtail(PT)messages.28A.7.4.1Pagingtailmessagessupported.28A.7.4.2PTmessagesinformationtype.28A.7.5A-fieldMACcontrol(MT)messages.29A.7.5.1Maccontrolmessagessupported.29A.7.5.2Basicconnectioncontrolmessages.30A.7.5.3MAClayertestmessages.30A.7.5.4Advancedconnectioncontrolmessages.31A.7.5.5Qualitycontrol(QC)messages.32A.7.5.6Broadcastandconnectionless(BCL)messages.33A.7.5.7Encryptioncontrol(EC)messages.33A.7.5.8REPconnectioncontrol(RCC)messages.34A.7.6B-FieldMessages.34A.7.6.1B-FieldMessagessupported.34A.7.6.2B-FieldAdvancedconnectioncontrolmessages.35A.7.6.3B-Field-Nullmessages.36A.7.6.4B-Field-Qualitycontrolmessages.37A.7.6.5B-Field-GF-channeldatapacketmessages.38A.8MACmessagesformatandfieldvalue.39A.8.1A-fieldidentitiesinformation(NT)message.39A.8.2A-fieldsysteminformation(QT)messages.40A.8.2.1QT-Staticsysteminformation.40A.8.2.2QT-ExtendedRFcarrierinformation.40A.8.2.3QT-Fixedpartcapability.41A.8.2.4QT-Extendedfixedpartcapabilities.41A.8.2.5QT-Secondaryaccessrightsidentities.42A.8.2.6QT-Multi-framenumber.42A.8.2.7QT-escape.42A.8.3A-fieldpagingtail(PT)messages.42A.8.3.1PTmessage-Fullpage.42A.8.3.2PTmessage-Longpage.43A.8.3.3PTmessage-Shortpage.43A.8.3.4PTmessage-Zerolengthpage.43A.8.3.5PTmessages-MACinfo.element.43A.8.3.5.1MACinfo.element-Fillbits.43A.8.3.5.2MACinfo.element-Blindfullslot.44A.8.3.5.3MACinfo.element-Otherbearer.44A.8.3.5.4MACinfo.element-Recommendedotherbearer.44A.8.3.5.5MACinfo.element-GoodRFPbearer.44A.8.3.5.6MACinfo.element-DummyorC/Lbearerposition.45A.8.3.5.7MACinfo.element-RFPidentity.45A.8.3.5.8MACinfo.element-Escape.45A.8.3.5.9MACinfo.element-DummyorC/Lbearermarker.45A.8.3.5.10MACinfo.element-Bearerhandoverinformation.45SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)5A.8.3.5.11MACinfo.element-RFPstatus.46A.8.3.5.12MACinfo.element-Activecarriers.46A.8.3.5.13MACinfo.element-C/Lbearerposition.46A.8.3.5.14MACinfo.element-RecommendedPPpowerlevel.46A.8.3.5.15MACinfo.element-Blinddoubleslot/RFP-FPinterfaceresourceinformation.47A.8.3.5.16MACinfo.element-Modulationtypesinformation.47A.8.4A-fieldMACcontrol(MT)messages.47A.8.4.1Basicconnectioncontrolmessages.47A.8.4.1.1BasicCC-accessrequest.47A.8.4.1.2BasicCC-bearerhandoverrequest.48A.8.4.1.3BasicCC-connectionhandoverrequest.48A.8.4.1.4BasicCC-unconfirmedaccessrequest.49A.8.4.1.5BasicCC-bearerconfirm.49A.8.4.1.6BasicCC-wait.49A.8.4.1.7BasicCC-release.50A.8.4.1.8BasicCC-attributes_Trequest.50A.8.4.1.9BasicCC-attributes_Tconfirm.51A.8.4.2MAClayertestmessages.52A.8.4.2.1MACtest-forcetransmit.52A.8.4.2.2MACtest-loopbackdata.52A.8.4.2.3MACtest-defeatantennadiversity.53A.8.4.2.4MACtest-escape.53A.8.4.2.5MACtest-networktest.53A.8.4.2.6MACtest-cleartestmodes.53A.8.4.2.7MACtest-changemodulationscheme.54A.8.4.3Advancedconnectioncontrolmessages.54A.8.4.3.1AdvancedCC-accessrequest.54A.8.4.3.2AdvancedCC-bearerhandoverrequest.54A.8.4.3.3AdvancedCC-connectionhandoverrequest.55A.8.4.3.4AdvancedCC-unconfirmedaccessrequest.55A.8.4.3.5AdvancedCC-bearerconfirm.56A.8.4.3.6AdvancedCC-wait.56A.8.4.3.7AdvancedCC-Attributes_Trequest.57A.8.4.3.8AdvancedCC-Attributes_Tconfirm.58A.8.4.3.9AdvancedCC-Bandwidth_Trequest.59A.8.4.3.10AdvancedCC-Bandwidth_Tconfirm.59A.8.4.3.11AdvancedCC-ChannelList.60A.8.4.3.12AdvancedCC-Unconfirmed_dummy.61A.8.4.3.13AdvancedCC-Unconfirmed_handover.61A.8.4.3.14AdvancedCC-release.62A.8.4.4Qualitycontrolmessages.62A.8.4.4.1QC-antennaswitchsinglebearerrequest/reject.62A.8.4.4.2QC-antennaswitchallbearersrequest/reject.63A.8.4.4.3QC-bearerhandoverreject/request.63A.8.4.4.4QC-connectionhandoverreject/request.64A.8.4.4.5QC-frequencycontrolsinglebearerreject/request.64A.8.4.4.6QC-frequencycontrolallbearersreject/request.65A.8.4.4.7QC-advancetimingallbearersreject/request.65A.8.4.4.8QC-sendprolongedpreamblerequest.66A.8.4.4.9QC-transmitprolongedpreambleconfirm.66A.8.4.4.10QC-frequencyreplacementrequest/confirm.67A.8.4.4.11QC-frequencyreplacementgrant.67A.8.4.5Broadcastandconnectionless(BCL)messages.68A.8.4.5.1BCL-CLF,firstof2transmissions,halfslot.68A.8.4.5.2BCL-CLF,firstof2transmissions,fullslot.68A.8.4.5.3BCL-CLF,firstof2transmissions,doubleslot.68A.8.4.5.4BCL-CLF,lasttransmission,halfslot.68A.8.4.5.5BCL-CLF,lasttransmission,fullslot.69A.8.4.5.6BCL-CLF,lasttransmission,doubleslot.69A.8.4.5.7BCL-C/Lsingletransmission,noCLForCLS.69A.8.4.5.8BCL-CLSservice,firsttransmission.69SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)6A.8.4.5.9BCL-changedummybearerposition.70A.8.4.5.10BCL-extendedsysteminfo.,A-fieldprocedure.70A.8.4.5.11BCL-extendedsysteminfo.,B-fieldprocedure.70A.8.4.6Encryptioncontrolmessages.71A.8.4.6.1EC-Encryptionstart.71A.8.4.6.2EC-Encryptionstop.72A.8.4.7MTmessage-B-fieldsetup.73A.8.4.8MTmessage-Escape.73A.8.4.9MTmessage-TARI.74A.8.4.10REPconnectioncontrolmessages.74A.8.4.10.1RCC-REPaccessrequest.74A.8.4.10.2RCC-REPbearerhandoverrequest.74A.8.4.10.3RCC-REPbearerconfirm.75A.8.4.10.4RCC-REPwait.75A.8.4.10.5RCC-REPrelease.75A.8.4.10.6RCC-REPchannelmaprequest.76A.8.4.10.7RCC-REPchannelmapconfirm.77A.8.5B-FieldMessages.77A.8.5.1B-Field-AdvancedCCmessages.77A.8.5.1.1B-fieldAdvancedCC-Accessrequest.77A.8.5.1.2B-fieldAdvancedCC-Bearerhandoverrequest.78A.8.5.1.3B-fieldAdvancedCC-Connectionhandoverrequest.79A.8.5.1.4B-fieldAdvancedCC-Unconfirmedaccessrequest.80A.8.5.1.5B-fieldAdvancedCC-Bearerconfirm.80A.8.5.1.6B-fieldAdvancedCC-Wait.81A.8.5.1.7B-fieldAdvancedCC-Attributes_Brequest.82A.8.5.1.8B-fieldAdvancedCC-Attributes_Bconfirm.83A.8.5.1.9B-fieldAdvancedCC-Bandwidth_Brequest.84A.8.5.1.10B-fieldAdvancedCC-Bandwidth_Bconfirm.85A.8.5.1.11B-fieldAdvancedCC-ChannelList.86A.8.5.1.12B-fieldAdvancedCC-Unconfirmed_Dummy.87A.8.5.1.13B-fieldAdvancedCC-Unconfirmed_Handover.87A.8.5.1.14B-fieldAdvancedCC-Release.88A.8.5.2B-field-NullMessages(NM).89A.8.5.2.1B-field-NMNoCForCLFdataintheB-field.89A.8.5.2.2B-field-NMOneB-subfieldcontainsCForCLFdata.89A.8.5.2.3B-field-NMTwoB-subfieldscontainCForCLFdata.90A.8.5.2.4B-field-NMThreeB-subfieldscontainCForCLFdata.91A.8.5.2.5B-field-NMFourB-subfieldscontainCForCLFdata.91A.8.5.2.6B-field-NMFiveB-subfieldscontainCForCLFdata.92A.8.5.2.7B-field-NMSixB-subfieldscontainCForCLFdata.93A.8.5.2.8B-field-NMSevenB-subfieldscontainCForCLFdata.93A.8.5.2.9B-field-NMEightB-subfieldscontainCForCLFdata.94A.8.5.2.10B-field-NMNineB-subfieldscontainCForCLFdata.95A.8.5.3B-Field-Qualitycontrol(QC)messages.95A.8.5.3.1B-FieldQC-Antennaswitchsinglebearerrequest/reject.95A.8.5.3.2B-FieldQC-Antennaswitchallbearersrequest/reject.96A.8.5.3.3B-FieldQC-Bearerhandoverreject/request.97A.8.5.3.4B-FieldQC-Connectionhandoverreject/request.97A.8.5.3.5B-FieldQC-Frequencycontrolsinglebearerreject/request.98A.8.5.3.6B-FieldQC-Frequencycontrolallbearersreject/request.99A.8.5.3.7B-FieldQC-Advancetimingallbearersreject/request.99A.8.5.3.8B-fieldQC-Sendprolongedpreamblerequest.100A.8.5.3.9B-fieldQC-Transmitprolongedpreambleconfirm.101A.8.5.3.10B-fieldQC-Frequencyreplacementrequest/confirm.101A.8.5.3.11B-fieldQC-Frequencyreplacementgrant.102A.8.5.3.12B-FieldQC-ResetrequestfirstTDMAhalfframe.102A.8.5.3.13B-FieldQC-ResetrequestsecondTDMAhalfframe.103SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)7A.8.5.3.14B-FieldQC-ResetrequestbothTDMAhalfframes.104A.8.5.3.15B-FieldQC-ResetconfirmfirstTDMAhalfframe.104A.8.5.3.16B-FieldQC-ResetconfirmsecondTDMAhalfframe.105A.8.5.3.17B-FieldQC-ResetconfirmbothTDMAhalfframes.106A.8.5.3.18B-FieldQC-MOD2ACK.106A.8.5.4B-Field-Extendedsysteminformation(ES)messages.107A.8.5.4.1B-Field-ESTARImessage.107A.8.5.5B-Field-GF-channeldatapacketmessages.107A.8.5.5.1B-Field-GF-NoCFdataintheB-field.107A.8.5.5.2B-Field-GF-OneB-subfieldcontainsCFdata.108A.8.5.5.3B-Field-GF-TwoB-subfieldscontainCFdata.108A.8.5.5.4B-Field-GF-ThreeB-subfieldscontainCFdata.109A.8.5.5.5B-Field-GF-FourB-subfieldscontainCFdata.109A.8.5.5.6B-Field-GF-FiveB-subfieldscontainCFdata.110A.8.5.5.7B-Field-GF-SixB-subfieldscontainCFdata.110A.8.5.5.8B-Field-GF-SevenB-subfieldscontainCFdata.111A.8.5.5.9B-Field-GF-EightB-subfieldscontainCFdata.111A.8.5.5.10B-Field-GF-NineB-subfieldscontainCFdata.112A.8.5.6B-Field-Escapemessage.112Bibliography.113History.114SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)8IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).Thepresentdocumentispart3ofamulti-partdeliverablecoveringtheDigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma,asidentifiedbelow:Part1:"Network(NWK)layer-PortableradioTermination(PT)";Part2:"DataLinkControl(DLC)layer-PortableradioTermination(PT)";Part3:"MediumAccessControl(MAC)layer-PortableradioTermination(PT)";Part4:"Network(NWK)layer-FixedradioTermination(FT)";Part5:"DataLinkControl(DLC)layer-FixedradioTermination(FT)";Part6:"MediumAccessControl(MAC)layer-FixedradioTermination(FT)";Part7:"Physicallayer".AnnexAofthisspecificationcontainsthePICSproformaforthePTmediumaccesscontrollayer.NationaltranspositiondatesDateofadoptionofthisEN:24November2000DateoflatestannouncementofthisEN(doa):28February2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31August2001DateofwithdrawalofanyconflictingNationalStandard(dow):31August2001SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)91ScopeThepresentdocumentprovidestheProtocolImplementationConformanceStatement(PICS)proformafortheDigitalEnhancedCordlessTelecommunicationsMediumAccessControllayeratthePortableTerminationasdefinedinEN300175-3[2]incompliancewiththerelevantrequirementsandinaccordancewiththerelevantguidancegiveninISO/IEC9646-7[4].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300175-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part1:Overview".[2]ETSIEN300175-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part3:MediumAccessControl(MAC)layer".[3]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[4]ISO/IEC9646-7:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:-termsgiveninEN300175-1[1];-termsgiveninISO/IEC9646-1[3]andinISO/IEC9646-7[4].Inparticular,thefollowingtermsgiveninISO/IEC9646-1[3]apply:ImplementationConformanceStatement(ICS):statementmadebythesupplierofanimplementationorsystemclaimedtoconformtoagivenspecification,statingwhichcapabilitieshavebeenimplemented.TheICScantakeseveralforms:protocolICS,profileICS,profilespecificICS,informationobjectICS,etc.ICSproforma:document,intheformofaquestionnaire,whichwhencompletedforanimplementationorsystembecomesanICS.SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)103.2AbbreviationsForthepurposesofthepresentdocument,theabbreviationsgiveninISO/IEC9646-1[3],themediumaccesscontrollayerabbreviationsgiveninEN300175-3[2],andthefollowingapply:ICSImplementationConformanceStatementIUTImplementationUnderTestPICSProtocolImplementationConformanceStatementSUTSystemUnderTest4ConformancerequirementtothisPICSproformaspecificationThesupplierofaprotocolimplementationwhichisclaimedtoconformtotheportableterminationspecificrequirementsofEN300175-3[2]shallcompleteacopyofthePICSproformaprovidedinannexAandshallprovidetheinformationnecessarytoidentifyboththesupplierandtheimplementation.AnICSwhichconformstothepresentdocumentshallbeaconformingPICSproformacompletedinaccordancewiththeguidancesforcompletiongiveninclauseA.1.SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)11AnnexA(normative):PICSproformaforDECTMACPTNotwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePICSproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPICS.A.1IntroductionforcompletingthePICSproformaA.1.1PurposesandstructureThepurposeofthisPICSistoprovideamechanismwherebyasupplierofanimplementationoftheportableterminationspecificmediumaccesscontrollayerrequirementsofEN300175-3:DECTMediumAccessControlLayermayprovideinformationinastandardform.ThePICSproformaissubdividedintosubclausesforthefollowingcategoriesofinformation:-guidancesforcompletingthePICSproforma;-identificationoftheimplementation;-identificationoftheprotocol;-services,proceduresandfunctions;-timersandprotocolparameters;-messages.A.1.2Symbols,abbreviationsandconventionsThePICSproformacontainedinthisannexiscomprisedofinformationintabularforminaccordancewiththeguidelinespresentedinISO/IEC9646-7.ItemcolumnTheitemcolumncontainsanumberwhichidentifiestheiteminthetable.ItemdescriptioncolumnTheitemdescriptioncolumndescribesinfreetexteachrespectiveitem(e.g.parameters,timers,etc.).Itimplicitlymeans"issupportedbytheimplementation?".StatuscolumnThefollowingnotations,definedinISO/IEC9646-7,areusedforthestatuscolumn:mmandatory-thecapabilityisrequiredtobesupported;ooptional-thecapabilitymaybesupportedornot(e.g.thecapabilityisnotallowedbecausetheunderlyingDECTlayers(serviceprovider)cannothandleitortherequirementbelongstoanapplicationi.e.doesnotbelongtothedatalinkcontrollayer);n/anotapplicable-inthegivencontext,itisimpossibletousethecapability;xprohibited(excluded)-thereisarequirementnottousethiscapabilityinthegivencontext;SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)12o.iqualifiedoptional-formutuallyexclusiveorselectableoptionsfromaset."i"isanintegerwhichidentifiesanuniquegroupofrelatedoptionalitemsandthelogicoftheirselectionwhichisdefinedimmediatelyfollowingthetable;ciconditional-therequirementonthecapability("m","o","x"or"n/a")dependsonthesupportofotheroptionalorconditionalitems."i"isanintegeridentifyinganuniqueconditionalstatusexpressionwhichisdefinedimmediatelyfollowingthetable.ReferencecolumnThereferencecolumngivesreferencetoEN300175-3,exceptwhereexplicitlystatedotherwise.SupportcolumnThesupportcolumnshallbefilledinbythesupplieroftheimplementation.Thefollowingcommonnotations,definedinISO/IEC9646-7,areusedforthesupportcolumn:Yorysupportedbytheimplementation;Nornnotsupportedbytheimplementation;N/A,n/aor-noanswerrequired(allowedonlyifthestatusisn/a,directlyorafterevaluationofaconditionalstatus).Ineachcontext,thekindof"non-support"whichisimplementedatthereceiptmaybeadditionallyindicatedsuchas:-Errtheitemistreatedasaprotocolerror;-lgtheitemisreceivedandignored(i.e.processedsyntactically,butnotsemantically);-rjtheitemisreceivedandrejected.NOTE:AsstatedinISO/IEC9646-7,supportforareceivedPDUrequirestheabilitytoparseallvalidparametersofthatPDU.SupportingaPDUwhilehavingnoabilitytoparseavalidparameterisnon-conformant.SupportforaparameteronaPDUmeansthatthesemanticsofthatparameteraresupported.ValuesallowedcolumnThevaluesallowedcolumncontainsthevaluesortherangesofvaluesallowed.Therangeofvalueisdefinedasfollows:[minvalue]to[maxvalue].Alternativevaluesaredefinedasfollows:[value1],[value2],to.,[valuen].EXAMPLE:'00110000'Bto'01001011'Bisthevaluerangefrom'00110000'Bto'01001011'B'00110000'B,'01001011'Bthevaluecanbe'00110000'Bor'01001011'B.ValuessupportedcolumnThevaluessupportedcolumnshallbefilledinbythesupplieroftheimplementation.Inthiscolumn,thevaluesortherangesofvaluessupportedbytheimplementationshallbeindicated.PrerequisitelineAprerequisitelinetakestheform:Prerequisite:.AprerequisitelinebeforeatabletitleindicatesthatthewholetableisnotrequiredtobecompletedifthepredicateisFALSE.A.1.3GuidancesforcompletingthePICSThesupplieroftheimplementationshallenteranexplicitstatementineachofthetablesprovidedusingthenotationdescribedinsubclauseA.1.2.Ifnecessary,specificinstructionisprovidedinthetextwhichprecedeseachtable.SIST EN 300 476-3 V1.2.1:2003
ETSIETSIEN300476-3V1.2.1(2000-11)13A.2IdentificationoftheimplementationA.2.1DateofstatementIdentifica
...