SIST EN 300 494-1 V1.2.1:2003
(Main)Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary
- Abstract
This EN provides update of ETS 300 494-1 the Profile Test Specification (PTS) summary referencing all the ENs necessary for the conformance testing of the Generic Access Profile. It reflects the changes into the new editions of all relevant standards, e.g EN 300 497, EN 300 444, etc. Supporting members: Ascom, Ericsson, Siemens, Tele Denmark.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
- Mandate
- BC-T-341
SIST EN 300 494-1 V1.2.1:2003 is the Slovenian standard that reproduces ETSI EN 300 494-1 V1.2.1 for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile (GAP) conformance testing. It is the summary part of the Profile Test Specification (PTS) and tells users which referenced ENs and test specifications are needed to test GAP implementations.
This standard is mainly for test laboratories, manufacturers, and conformity assessors working on DECT GAP Portable radio Termination (PT) and Fixed radio Termination (FT) equipment. In practice, it acts as a roadmap to the conformance test parts for each DECT protocol layer.
What does SIST EN 300 494-1 V1.2.1:2003 specify?
SIST EN 300 494-1 V1.2.1:2003 specifies the PTS summary for the DECT GAP. It identifies the ENs that together form the GAP PTS and shows how the profile is broken down for conformance testing.
The document is organized into:
- clause 4, which gives profile identification information
- clause 5, which summarizes the conformance testing material for each DECT protocol layer
- clause 6, which states conformance requirements for the test realizer and laboratories
It also includes tables that map the profile to its ICS, IXIT, PICS, TSS, TP, and ATS references. That structure matters because it tells a test house exactly which companion documents to use for a particular layer or terminal type.
| Part or reference | What it covers |
|---|---|
| Part 1 | Summary |
| Part 2 | Profile Specific Test Specification - PT |
| Part 3 | Profile Specific Test Specification - FT |
What are the key requirements of SIST EN 300 494-1 V1.2.1:2003?
SIST EN 300 494-1 V1.2.1:2003 does not define protocol behavior itself; it points to the test material needed to verify GAP conformance. The important practical requirement is to use the referenced ENs consistently when preparing and running conformance tests.
Profile identification and supporting documents
Clause 4 links the GAP profile to EN 300 444 and to the profile ICS, PSTS, IXIT, and SCS proformas. For a buyer or engineer, this shows which declarations and test inputs belong to the profile and where the supporting test framework is defined.
NWK layer testing
Clause 5.1 maps the Network (NWK) layer to EN 300 175-5, ETS 300 476, and the relevant EN 300 497 test suite parts. It also notes the applicability of the ATS as covering basic speech and the basic services and procedures for Call Control (CC), Mobility Management (MM), and Link Control Entity (LCE). In practice, this tells testers which network-level functions must be exercised and which test suites cover them.
DLC layer testing
Clause 5.2 points the Data Link Control (DLC) layer to EN 300 175-4 and the corresponding EN 300 497 test suite parts. This means the DLC conformance work is not standalone; it is tied to the DECT common interface test library and its associated PICS and PIXIT information.
MAC layer testing
Clause 5.3 maps the Medium Access Control (MAC) layer to EN 300 175-3 and the EN 300 497-1 through EN 300 497-3 test material. The applicability of the ATS is marked as remote, with a modified ATM for this layer. For practice, this tells users that MAC testing relies on the specific abstract test suites and realization rules named in the reference tables.
PH layer testing
Clause 5.4 maps the Physical layer (PH) to EN 300 175-2 and EN 300 176. The applicability of the ATS is described as covering general terminal attachment requirements and basic telephony applications. In practice, this means physical-layer conformity is checked against the DECT common interface plus approval-style test material.
Conformance of the test system and laboratory
Clause 6 requires the test realizer of a Means Of Testing (MOT) to comply with ISO/IEC 9646-4, and the laboratories running conformance tests to comply with ISO/IEC 9646-5. This matters because the standard is not only about the equipment under test - it also sets the framework for how the test environment and test service must be realized.
What terms does SIST EN 300 494-1 V1.2.1:2003 define?
- DECT - Digital Enhanced Cordless Telecommunications, the cordless telecommunications system covered by the document.
- GAP - Generic Access Profile, the profile whose conformance is being tested.
- PTS - Profile Test Specification, the set of test references and rules used for profile conformance.
- PSTS - Profile Specific Test Specification, the part of the test specification dedicated to a specific terminal type.
- PICS - Protocol Implementation Conformance Statement, the proforma used to state implemented protocol options.
- PIXIT - Protocol Implementation eXtra Information for Testing, the extra implementation information needed to run tests.
- ATS - Abstract Test Suite, the abstract test cases used for conformance checking.
- MOT - Means Of Testing, the test system used by a laboratory.
Who uses SIST EN 300 494-1 V1.2.1:2003?
SIST EN 300 494-1 V1.2.1:2003 is used by DECT equipment manufacturers, conformity test laboratories, and product assessors. It is also relevant to quality managers and buyers who need to confirm that a DECT GAP product will be tested against the correct profile and layer-specific test specifications.
What changed in SIST EN 300 494-1 V1.2.1:2003 from the previous edition?
SIST EN 300 494-1 V1.2.1:2003 updates ETS 300 494-1 and aligns the summary with newer editions of the relevant standards. The scope specifically notes updates reflected into the new editions of related ENs, including EN 300 497 and EN 300 444.
Which standards are used with SIST EN 300 494-1 V1.2.1:2003?
The document relies on the DECT Common Interface parts in EN 300 175-1 to EN 300 175-8, especially the Physical, MAC, DLC, NWK, identities and addressing, security, and speech coding parts. It also uses EN 300 444 for the GAP profile itself, ETS 300 476 for the PICS proforma, EN 300 497-1 to EN 300 497-9 for the test case library, EN 300 176 for approval test specification material, and ISO/IEC 9646-1 to ISO/IEC 9646-7 for the conformance testing framework.
What does the SIST EN 300 494-1 V1.2.1:2003 document contain?
- A profile identification table linking GAP to its profile specification and profile test documents
- Layer-by-layer tables for NWK, DLC, MAC, and PH conformance testing
- Cross-references to PICS, TSS, TP, ATS, ATM, and partial PIXIT material
- A conformance clause for test realizer and laboratory obligations
- A bibliography and document history for background and traceability
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 494-1 V1.2.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary". This standard covers: This EN provides update of ETS 300 494-1 the Profile Test Specification (PTS) summary referencing all the ENs necessary for the conformance testing of the Generic Access Profile. It reflects the changes into the new editions of all relevant standards, e.g EN 300 497, EN 300 444, etc. Supporting members: Ascom, Ericsson, Siemens, Tele Denmark.
This EN provides update of ETS 300 494-1 the Profile Test Specification (PTS) summary referencing all the ENs necessary for the conformance testing of the Generic Access Profile. It reflects the changes into the new editions of all relevant standards, e.g EN 300 497, EN 300 444, etc. Supporting members: Ascom, Ericsson, Siemens, Tele Denmark.
SIST EN 300 494-1 V1.2.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 494-1 V1.2.1:2003 is associated with the following European legislation: Standardization Mandates: BC-T-341. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 300 494-1 V1.2.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.3RY]HWHNDigital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 1: Summary33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 494-1 Version 1.2.1SIST EN 300 494-1 V1.2.1:2003en01-december-2003SIST EN 300 494-1 V1.2.1:2003SLOVENSKI
STANDARD
ETSIETSI EN 300 494-1 V1.2.1 (1999-08)2ReferenceREN/DECT-040143-1 (4ko90ioo.PDF)KeywordsDECT, GAP, PTS, testingETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 300 494-1 V1.2.1:2003
ETSIETSI EN 300 494-1 V1.2.1 (1999-08)3ContentsIntellectual Property Rights.4Foreword.41Scope.52References.53Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Profile identification.85Elements of the PTS.85.1Conformance testing for NWK layer.85.2Conformance testing for DLC layer.95.3Conformance testing for MAC layer.95.4Conformance testing for PH layer.106Conformance.10Bibliography.11History.12SIST EN 300 494-1 V1.2.1:2003
ETSIETSI EN 300 494-1 V1.2.1 (1999-08)4Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server(http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced CordlessTelecommunications (DECT).The present document is part 1 of a multi-part EN covering the Generic Access Profile (GAP) as identified below:Part 1:"Summary";Part 2:"Profile Specific Test Specification (PSTS) - Portable radio Termination (PT)";Part 3:"Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)".National transposition datesDate of adoption of this EN:6 August 1999Date of latest announcement of this EN (doa):30 November 1999Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 May 2000Date of withdrawal of any conflicting National Standard (dow):31 May 2000SIST EN 300 494-1 V1.2.1:2003
ETSIETSI EN 300 494-1 V1.2.1 (1999-08)51ScopeThe present document specifies the Profile Test Specification (PTS) summary referencing all the ENs necessary for theconformance testing of the DECT Generic Access Profile (GAP).This GAP PTS summary together with the ENs it references constitute the GAP PTS.The present document has the following structure:-clause 4 contains general information relative to the profile including references to the related ENs;-clause 5 contains a summary and references to the ENs relevant for each of DECT protocol layers to be tested.2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 1: Overview".[2]EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 2: Physical Layer (PHL)".[3]EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 3: Medium Access Control (MAC) layer".[4]EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 4: Data Link Control (DLC) layer".[5]EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 5: Network (NWK) layer".[6]EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 6: Identities and addressing".[7]EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 7: Security features".[8]EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI);Part 8: Speech coding and transmission".[9]Void.[10]EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile(GAP)".[11]ISO/IEC 9646-1: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 1: General concepts".[12]ISO/IEC 9646-2: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 2: Abstract test suite specification".SIST EN 300 494-1 V1.2.1:2003
ETSIETSI EN 300 494-1 V1.2.1 (1999-08)6[13]ISO/IEC 9646-3: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 3: The Tree and Tabular Combined Notation (TTCN)".[14]ISO/IEC 9646-4: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 4: Test realization".[15]ISO/IEC 9646-5: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 5: Requirements on test laboratories and clients for theConformance Assessment process".[16]ISO/IEC 9646-6: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 6: Protocol Profile Test Specification".[17]ISO/IEC 9646-7: "Information technology; Open Systems Interconnection; Conformance testingmethodology and framework; Part 7: Implementation Conformance Statements ".[18]TR 101 101: "Methods for Testing and Specifi
...