SIST-TS ETSI/TS 102 255 V1.1.1:2005

SLOVENSKI STANDARD
01-marec-2005
=DVHEQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL3,610HGFHQWUDOQLVLJQDOL]DFLMVNL
SURWRNRO'RSROQLOQDVWRULWHYQDG]RUVSRURþLOQHJDFHQWUDLQLGHQWLILNDFLMD
SRãWQHJDSUHGDOD
Private Integrated Services Network (PISN); Inter-exchange Signalling Protocol;
Message Centre Monitoring and Mailbox Identification supplementary service
Ta slovenski standard je istoveten z: TS 102 255 Version 1.1.1
ICS:
33.040.35 Telefonska omrežja Telephone networks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Technical Specification
Private Integrated Services Network (PISN);
Inter-exchange Signalling Protocol;
Message Centre Monitoring and
Mailbox Identification supplementary service

2 ETSI TS 102 255 V1.1.1 (2003-08)

Reference
DTS/ECMA-00230
Keywords
PISN, QSIG, stage 3, supplementary service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
editor@etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2003.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI TS 102 255 V1.1.1 (2003-08)
Contents
Intellectual Property Rights.8
Foreword.8
Brief history.8
1 Scope.9
2 Conformance.9
3 References (normative).9
4 Definitions.10
4.1 External definitions.10
4.2 Other definitions.11
4.2.1 Message Centre PINX .11
4.2.2 Served User PINX .11
5 Acronyms.11
6 Signalling protocol for the support of SS-MCM.12
6.1 SS-MCM description.12
6.2 SS-MCM operational requirements.12
6.2.1 Requirements on a Message Centre PINX.12
6.2.2 Requirements on a Served User PINX.13
6.2.3 Requirements on a Transit PINX.13
6.3 SS-MCM coding requirements.13
6.3.1 Operations.13
6.3.2 Information elements.23
6.3.2.1 Facility information element.23
6.3.2.2 Other information elements.23
6.3.3 Messages.23
6.4 SS-MCM state definitions.24
6.4.1 States at the Message Centre PINX .24
6.4.1.1 State MCM-MC-idle.24
6.4.1.2 State MCM-MC-wait.24
6.4.2 States at the Served User PINX .24
6.4.2.1 State MCM-SU-idle.24
6.4.2.2 State MCM-SU-wait.24
6.4.2.3 State MCM-SU-update.24
6.5 SS-MCM signalling procedures.24
6.5.1 Actions at the Message Centre PINX .24
6.5.1.1 Normal procedures.25
6.5.1.1.1 Activation, deactivation and interrogation.25
6.5.1.1.2 Incoming New Message.25
6.5.1.1.3 No New Messages of a Message Type available at the Served User's mailbox .26
6.5.1.1.4 Update of Message Centre Information (update procedure).26
6.5.1.1.5 Update request from the Served User.27
6.5.1.1.6 Mailbox-full indication.28
6.5.1.2 Exceptional procedures.28
6.5.1.2.1 Activation, deactivation and interrogation.28
6.5.1.2.2 Incoming New Message.28
6.5.1.2.3 No New Messages of a Message Type available at the Served User's mailbox .28
6.5.1.2.4 Update of Message Centre Information.28
6.5.1.2.5 Update request from the Served User.28
6.5.2 Actions at the Served User PINX .29
6.5.2.1 Normal procedures.29
6.5.2.1.1 Activation, deactivation and interrogation.29
6.5.2.1.2 Incoming New Message.29
6.5.2.1.3 No New Messages of a Message Type available at the Served User's mailbox .29
ETSI
4 ETSI TS 102 255 V1.1.1 (2003-08)
6.5.2.1.4 Update of Message Centre Information (update procedure).29
6.5.2.1.5 Update request from the Served User.30
6.5.2.1.6 Mailbox-full indication.30
6.5.2.2 Exceptional procedures.30
6.5.2.2.1 Activation, deactivation and interrogation.30
6.5.2.2.2 Incoming New Message.30
6.5.2.2.3 No New Messages of a Message Type available at the Served User's mailbox .30
6.5.2.2.4 Update of Message Centre Information (update procedure).31
6.5.2.2.5 Update request from the Served User.31
6.5.3 Actions at a Transit PINX.31
6.6 SS-MCM impact of interworking with public ISDNs.31
6.7 SS-MCM impact of interworking with non-ISDNs.31
6.8 Protocol interactions between SS-MCM and other supplementary services and ANFs.31
6.8.1 Calling Line Identification Presentation (SS-CLIP) .31
6.8.2 Connected Line Identification Presentation (SS-COLP) .31
6.8.3 Calling/Connected Line Identification Restriction (SS-CLIR).31
6.8.4 Calling Name Identification Presentation (SS-CNIP).31
6.8.5 Calling/Connected Name Identification Restriction (SS-CNIR) .32
6.8.6 Connected Name Identification Presentation (SS-CONP).32
6.8.7 Call Forwarding Unconditional (SS-CFU) .32
6.8.8 Call Forwarding Busy (SS-CFB).32
6.8.9 Call Forwarding No Reply (SS-CFNR).32
6.8.10 Path Replacement (ANF-PR).32
6.8.11 Call Transfer (SS-CT).32
6.8.12 Call Deflection (SS-CD).32
6.8.13 Completion of Calls to Busy Subscribers (SS-CCBS).32
6.8.14 Completion of Calls on No Reply (SS-CCNR).32
6.8.15 Call Offer (SS-CO) .32
6.8.16 Do Not Disturb (SS-DND) .32
6.8.17 Do Not Disturb Override (SS-DNDO).32
6.8.18 Call Intrusion (SS-CI).32
6.8.19 Advice of Charge (SS-AOC) .33
6.8.20 Recall (SS-RE).33
6.8.21 Call Interception (SS-CINT).33
6.8.22 Transit Counter (ANF-TC) .33
6.8.23 Route Restriction Class (ANF-RRC).33
6.8.24 Message Waiting Indication (SS-MWI) .33
6.8.25 Wireless Terminal Location Registration (SS-WTLR).33
6.8.26 Wireless Terminal Incoming Call (SS-WTMI).33
6.8.27 Wireless Terminal Outgoing Call (SS-WTMO) .33
6.8.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .33
6.8.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .33
6.8.30 Common Information (SS-CMN).33
6.8.31 Call Priority Interruption (Protection) (SS-CPI(P)) .34
6.8.32 Private User Mobility Incoming Call (ANF-PUMI).34
6.8.33 Private User Mobility Outgoing Call (ANF-PUMO).34
6.8.34 Private User Mobility Registration (SS-PUMR).34
6.8.35 Single Step Call Transfer (SS-SSCT) .34
6.8.36 Simple Dialog (SS-SD).34
6.8.37 Call Identification and Call Linkage (ANF-CIDL).34
6.8.38 Short Message Service (SS-SMS) .34
6.8.39 Make Call Request (SS-MCR).34
6.8.40 Mailbox Identification (SS-MID) .34
6.9 SS-MCM parameter values (timers).34
6.9.1 Timer T1.34
6.9.2 Timer T2.35
6.9.3 Timer T3.35
7 Signalling protocol for the support of SS-MID.35
7.1 SS-MID description.35
7.2 SS-MID operational requirements.35
7.2.1 Requirements on a Message Centre PINX.35
ETSI
5 ETSI TS 102 255 V1.1.1 (2003-08)
7.2.2 Requirements on a Served User PINX.35
7.2.3 Requirements on a Transit PINX.35
7.3 SS-MID coding requirements.35
7.3.1 Operations.35
7.3.2 Information elements.38
7.3.2.1 Facility information element.38
7.3.2.2 Other information elements.38
7.3.3 Messages.38
7.4 SS-MID state definitions .38
7.4.1 States at the Message Centre PINX .38
7.4.1.1 State MID-MC-idle.38
7.4.1.2 State MID-MC-wait.38
7.4.2 States at the Served User PINX .39
7.4.2.1 State MID-SU-idle.39
7.4.2.2 State MID-SU-wait.39
7.5 SS-MID signalling procedures .39
7.5.1 Actions at the Message Centre PINX .39
7.5.1.1 Normal procedures.39
7.5.1.1.1 Activation, deactivation and interrogation.39
7.5.1.1.2 Invocation and operation .39
7.5.1.2 Exceptional procedures.40
7.5.1.2.1 Activation, deactivation and interrogation.40
7.5.1.2.2 Invocation and operation .40
7.5.2 Actions at the Served User PINX .40
7.5.2.1 Normal procedures.40
7.5.2.1.1 Activation, deactivation and interrogation.40
7.5.2.1.2 Invocation and operation .40
7.5.2.2 Exceptional procedures.41
7.5.2.2.1 Activation, deactivation and interrogation.41
7.5.2.2.2 Invocation and operation .41
7.5.3 Actions at a Transit PINX.41
7.6 SS-MID impact of interworking with public ISDNs.41
7.7 SS-MID impact of interworking with non-ISDNs.41
7.8 Protocol interactions between SS-MID and other supplementary services and ANFs.41
7.8.1 Calling Line Identification Presentation (SS-CLIP) .41
7.8.2 Connected Line Identification Presentation (SS-COLP) .41
7.8.3 Calling/Connected Line Identification Restriction (SS-CLIR).41
7.8.4 Calling Name Identification Presentation (SS-CNIP).42
7.8.5 Calling/Connected Name Identification Restriction (SS-CNIR) .42
7.8.6 Connected Name Identification Presentation (SS-CONP).42
7.8.7 Call Forwarding Unconditional (SS-CFU) .42
7.8.8 Call Forwarding Busy (SS-CFB).42
7.8.9 Call Forwarding No Reply (SS-CFNR).42
7.8.10 Path Replacement (ANF-PR).42
7.8.11 Call Transfer (SS-CT).42
7.8.12 Call Deflection (SS-CD).42
7.8.13 Completion of Calls to Busy Subscribers (SS-CCBS).42
7.8.14 Completion of Calls on No Reply (SS-CCNR).42
7.8.15 Call Offer (SS-CO) .42
7.8.16 Do Not Disturb (SS-DND) .42
7.8.17 Do Not Disturb Override (SS-DNDO).42
7.8.18 Call Intrusion (SS-CI).43
7.8.19 Advice of Charge (SS-AOC) .43
7.8.20 Recall (SS-RE).43
7.8.21 Call Interception (SS-CINT).43
7.8.22 Transit Counter (ANF-TC) .43
7.8.23 Route Restriction Class (ANF-RRC).43
7.8.24 Message Waiting Indication (SS-MWI) .43
7.8.25 Wireless Terminal Location Registration (SS-WTLR).43
7.8.26 Wireless Terminal Incoming Call (SS-WTMI).43
7.8.27 Wireless Terminal Outgoing Call (SS-WTMO) .43
7.8.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .43
ETSI
6 ETSI TS 102 255 V1.1.1 (2003-08)
7.8.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .43
7.8.30 Common Information (SS-CMN).43
7.8.31 Call Priority Interruption (Protection) (SS-CPI(P)) .43
7.8.32 Private User Mobility Incoming Call (ANF-PUMI).44
7.8.33 Private User Mobility Outgoing Call (ANF-PUMO).44
7.8.34 Private User Mobility Registration (SS-PUMR).44
7.8.35 Single Step Call Transfer (SS-SSCT) .44
7.8.36 Simple Dialog (SS-SD).44
7.8.37 Call Identification and Call Linkage (ANF-CIDL).44
7.8.38 Short Message Service (SS-SMS) .44
7.8.39 Make Call Request (SS-MCR).44
7.8.40 Message Centre Monitoring (SS-MCM).44
7.9 SS-MID parameter values (timers).44
7.9.1 Timer T1.44
7.9.2 Timer T2.45
Annex A (normative): Protocol Implementation Conformance Statement (PICS) Proforma .46
A.1 Introduction.46
A.2 Instructions for completing the PICS proforma .46
A.2.1 General structure of the PICS proforma .46
A.2.2 Additional information.47
A.2.3 Exception information.47
A.3 PICS proforma for SS-MCM .47
A.3.1 Implementation identification.47
A.3.2 Protocol summary.48
A.3.3 General.48
A.3.4 Procedures.48
A.3.5 Coding.49
A.3.6 Timers.50
A.4 PICS proforma for SS-MID .51
A.4.1 Implementation identification.51
A.4.2 Protocol summary.51
A.4.3 General.51
A.4.4 Procedures.52
A.4.5 Coding.52
A.4.6 Timers.52
Annex B (informative): Examples of Message Sequences.53
B.1 Example message sequence for SS-MCM .54
B.1.1 Example message sequence for activation, deactivation and interrogation.54
B.1.2 Example message sequence for the arrival of a New Message .57
B.1.3 Example message sequence for the sending of the NoNewMessage indication.58
B.1.4 Example message sequence for the Update of Message Centre Information (update procedure).59
B.1.5 Example message sequence for the SS-MCM Update request from the Served user.60
B.1.6 Example message sequence for the SS-MCM Mailbox-Full indication.61
B.2 Example message sequences for interworking between for SS-MCM and SS-MWI .62
B.2.1 SS-MCM is implemented at the Message Centre PINX.62
B.2.2 SS-MCM is implemented at the Served User PINX .66
B.3 Example message sequence for SS-MID .69
B.3.1 Example message sequence for identification of a specific Served User Mailbox.69
B.3.2 Example message sequence for authentication of a Served User at a specific Mailbox.70
Annex C (informative): Specification and Description Language (SDL) Representation of
Procedures.71
C.1 SDL representation of SS-MCM at the Message Centre PINX .71
C.2 SDL representation of SS-MCM at the Served User PINX .78
ETSI
7 ETSI TS 102 255 V1.1.1 (2003-08)
C.3 SDL representation of SS-MID at the Message Centre PINX .83
C.4 SDL representation of SS-MID at the Served User PINX .86
Annex D (informative): List of Message Types.88
D.1 Telephony Type Messages .88
D.1.1 Speech.88
D.1.2 UnrestrictedDigitalInformation.88
D.1.3 Audio3100Hz.88
D.1.4 Telephony.88
D.1.5 Teletex.88
D.1.6 TelefaxGroup4Class1.88
D.1.7 VideotextSyntaxBased.88
D.1.8 Videotelephony.88
D.1.9 TelefaxGroup2-3.88
D.2 Data Type Messages.89
D.2.1 Email.89
D.2.2 Video.89
D.2.3 FileTransfer.89
D.2.4 ShortMessageService.89
D.3 Combination of Messages .89
D.4 Additional Message Types .89
D.4.1 allServices.90
D.4.2 multimediaUnknown.90
D.4.3 serviceUnknown.90
History .91

ETSI
8 ETSI TS 102 255 V1.1.1 (2003-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the European
Telecommunications Standards Institute (ETSI).
Brief history
The present document is one of a series of ECMA Standards defining services and signalling protocols applicable to
Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to
the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has been
produced under ETSI work item DTS/ECMA-00230.
The present document specifies the signalling protocol for use at the Q reference point in support of the Message Centre
Monitoring supplementary service as well as the Mailbox Identification supplementary service. The protocol defined in
the present document forms part of the PSS1 protocol (informally known as QSIG).
SS-MCM is based on SS-MWI and includes its entire functionality. The interoperability with SS-MWI is therefore
guaranteed. Compared to SS-MWI, SS-MCM offers an enhanced functionality for monitoring status changes of
messages stored in the Served User's Mailbox as follows:
• individual activation and deactivation for the monitoring of messages of different Message Type(s) within the
Mailbox as well as interrogation of the actual SS-MCM configuration;
• retrieval of information about all messages (i.e. new and retrieved messages) in the mailbox independent of the
Message Status;
• request of detailed updated information about messages stored in the mailbox.
The present document is based upon the practical experience of ECMA member companies and the results of their
active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national
standardization bodies. It represents a pragmatic and widely based consensus.
ETSI
9 ETSI TS 102 255 V1.1.1 (2003-08)
1 Scope
The present document specifies the signalling protocol for the support of the Message Centre Monitoring supplementary
service (SS-MCM) as well as the Mailbox Identification supplementary service (SS-MID) at the Q reference point
between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated
Services Network (PISN).
The supplementary service MCM enables a Served User to get informed by a Message Centre about
...