SIST EN 300 417-2-2 V1.1.2:2003

SLOVENSKI STANDARD
01-december-2003
3UHQRVLQPXOWLSOHNVLUDQMH70±*HQHULþQH]DKWHYH]DSUHQRVQRIXQNFLRQDOQRVW
RSUHPH±GHO)XQNFLMHIL]LþQHJDRGVHNDSODVWL]DVLQKURQRGLJLWDOQRKLHUDUKLMR
6'+LQSOH]LRKURQRGLJLWDOQRKLHUDUKLMR3'+±3URIRUPDVSHFLILNDFLMDL]MDYHR
VNODGQRVWLL]YHGEH,&6
Transmission and Multiplexing (TM); Generic requirements of transport functionality of
equipment; Part 2-2: Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital
Hierarchy (PDH) physical section layer functions; Implementation Conformance
Statement (ICS) proforma specification
Ta slovenski standard je istoveten z: EN 300 417-2-2 Version 1.1.2
ICS:
33.040.20 Prenosni sistem Transmission systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 300 417-2-2 V1.1.2 (1998-11)
European Standard (Telecommunications series)
Transmission and Multiplexing (TM);
Generic requirements of transport functionality of equipment;
Part 2-2: Synchronous Digital Hierarchy (SDH) and
Plesiochronous Digital Hierarchy (PDH)
physical section layer functions;
Implementation Conformance Statement (ICS)
proforma specification
2 EN 300 417-2-2 V1.1.2 (1998-11)
Reference
REN/TM-01015-2-2 (3v0iiidc.PDF)
Keywords
ICS, PDH, SDH, STM, transmission, testing
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
secretariat@etsi.fr
Individual copies of this ETSI deliverable
can be downloaded from
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI
3 EN 300 417-2-2 V1.1.2 (1998-11)
Contents
Intellectual Property Rights.9
Foreword .9
Introduction .10
1 Scope.11
2 References.11
3 Definitions and abbreviations .12
3.1 Definitions . 12
3.2 Abbreviations. 12
4 Conformance to this ICS proforma specification .14
Annex A (normative): ICS proforma for EN 300 417-2-1.15
A.1 Guidance for completing the ICS proforma.15
A.1.1 Purposes and structure . 15
A.1.2 Abbreviations and conventions. 15
A.1.3 Instructions for completing the ICS proforma . 17
Annex B (normative): ICS proforma for STM-1 optical section layer.18
B.1 Identification of the implementation.18
B.1.1 Date of the statement . 18
B.1.2 IUT identification . 18
B.1.3 SUT identification. 18
B.1.4 Product supplier. 19
B.1.5 Client . 19
B.1.6 ICS contact person. 20
B.2 Identification of the EN.20
B.3 Global statement of conformance of OS1 layer.20
B.4 OS1 layer description.21
B.5 OS1 layer transmission tables.22
B.5.1 OS1 source operating wavelength range, OS1_TT_So. 22
B.5.2 OS1 source spectral characteristics, OS1_TT_So. 23
B.5.3 OS1 source optical characteristics, OS1_TT_So . 24
B.5.4 OS1 receiver characteristics, OS1_TT_Sk. 25
B.5.5 OS1 regeneration characteristics, OS1/RS1_A_So, OS1/RS1_A_Sk. 26
B.6 Defect, fault and performance monitoring.27
B.6.1 Port status management . 27
B.6.2 Defect detection and clearance criteria . 27
B.6.3 Consequent action activation and clearance criteria . 28
B.6.4 Defect correlation . 29
B.6.5 Performance monitoring . 29
Annex C (normative): ICS proforma for STM-4 optical section layer.30
C.1 Identification of the implementation.30
C.1.1 Date of the statement . 30
C.1.2 IUT identification . 30
C.1.3 SUT identification. 30
C.1.4 Product supplier. 31
C.1.5 Client . 31
C.1.6 ICS contact person. 32
ETSI
4 EN 300 417-2-2 V1.1.2 (1998-11)
C.2 Identification of the EN.32
C.3 Global statement of conformance of OS4 layer.32
C.4 OS4 layer description.33
C.5 OS4 layer transmission tables.34
C.5.1 OS4 source operating wavelength range, OS4_TT_So. 34
C.5.2 OS4 source spectral characteristics, OS4_TT_So. 35
C.5.3 OS4 source optical characteristics, OS4_TT_So . 36
C.5.4 OS4 receiver characteristics, OS4_TT_Sk. 37
C.5.5 OS4 regeneration characteristics, OS4/RS4_A_So, OS4/RS4_A_Sk. 38
C.6 OS4 layer defect, fault and performance monitoring tables .39
C.6.1 Port status management . 39
C.6.2 Defect detection and clearance criteria . 39
C.6.3 Consequent action activation and clearance criteria . 40
C.6.4 Defect correlation . 41
C.6.5 Performance monitoring . 41
Annex D (normative): ICS proforma for STM-16 optical section layer.42
D.1 Identification of the implementation.42
D.1.1 Date of the statement . 42
D.1.2 IUT identification . 42
D.1.3 SUT identification. 42
D.1.4 Product supplier. 43
D.1.5 Client . 43
D.1.6 ICS contact person. 44
D.2 Identification of the EN.44
D.3 Global statement of conformance of OS16 layer.44
D.4 OS16 layer description.45
D.5 OS16 layer transmission tables.46
D.5.1 OS16 source operating wavelength range, OS16_TT_So. 46
D.5.2 OS16 source spectral characteristics, OS16_TT_So. 46
D.5.3 OS16 source optical characteristics, OS16_TT_So . 47
D.5.4 OS16 receiver characteristics, OS16_TT_Sk. 48
D.5.5 OS16 regeneration characteristics, OS16/RS16_A_So, OS16/RS16_A_Sk. 49
D.6 OS16 layer defect, fault and performance monitoring tables .50
D.6.1 Port status management . 50
D.6.2 Defect detection and clearance criteria . 50
D.6.3 Consequent action activation and clearance criteria . 51
D.6.4 Defect correlation . 52
D.6.5 Performance monitoring . 52
Annex E (normative): ICS proforma for STM-1 electrical section layer.53
E.1 Identification of the implementation.53
E.1.1 Date of the statement . 53
E.1.2 IUT identification . 53
E.1.3 SUT identification. 53
E.1.4 Product supplier. 54
E.1.5 Client . 54
E.1.6 ICS contact person. 55
ETSI
5 EN 300 417-2-2 V1.1.2 (1998-11)
E.2 Identification of the EN.55
E.3 Global statement of conformance of ES1 layer .55
E.4 ES1 layer description .56
E.5 ES1 layer transmission tables .56
E.5.1 ES1 layer data stream. 56
E.5.2 ES1 layer connection function, ES1_C. 56
E.5.3 ES1 layer trail termination functions, ES1_TT_So and ES1_TT_Sk . 57
E.5.4 ES1 to RS1 adaptation functions, ES1/RS1_A_So and ES1/RS1_A_Sk. 58
E.6 ES1 layer defect, fault and performance monitoring tables.59
E.6.1 Port status management . 59
E.6.2 Defect detection and clearance criteria . 60
E.6.3 Consequent action activation and clearance criteria . 60
E.6.4 Defect correlation . 61
E.6.5 Performance monitoring . 61
Annex F (normative): ICS proforma for E4 electrical section layer.62
F.1 Identification of the implementation.62
F.1.1 Date of the statement . 62
F.1.2 IUT identification . 62
F.1.3 SUT identification. 62
F.1.4 Product supplier. 63
F.1.5 Client . 63
F.1.6 ICS contact person. 64
F.2 Identification of the EN.64
F.3 Global statement of conformance of E4 layer .64
F.4 E4 layer description .65
F.5 E4 layer transmission tables.65
F.5.1 E4 layer data stream. 65
F.5.2 E4 layer connection function, E4_C . 65
F.5.3 E4 layer trail termination functions, E4_TT_So and E4_TT_Sk. 66
F.5.4 E4 to P4x adaptation functions, E4/P4x_A_So and E4/P4x_A_Sk . 67
F.5.5 E4to P4e adaptation functions, E4/P4e_A_So and E4/P4e_A_Sk. 68
F.5.6 E4 to P4s adaptation functions, E4/P4s_A_So and E4/P4s_A_Sk . 69
F.6 E4 layer defect, fault and performance monitoring tables.70
F.6.1 Port status management . 70
F.6.2 Defect detection and clearance criteria . 71
F.6.3 Consequent action activation and clearance criteria . 71
F.6.4 Defect correlation . 72
Annex G (normative): ICS proforma for E31 electrical section layer.73
G.1 Identification of the implementation.73
G.1.1 Date of the statement . 73
G.1.2 IUT identification . 73
G.1.3 SUT identification. 73
G.1.4 Product supplier. 74
G.1.5 Client . 74
G.1.6 ICS contact person. 75
ETSI
6 EN 300 417-2-2 V1.1.2 (1998-11)
G.2 Identification of the EN.75
G.3 Global statement of conformance of E31 layer .75
G.4 E31 layer description .76
G.5 E31 layer transmission tables.76
G.5.1 E31 layer data stream. 76
G.5.2 E31 layer connection function, E31_C . 76
G.5.3 E31 layer trail termination functions, E31_TT_So and E31_TT_Sk. 77
G.5.4 E31 to P31x adaptation functions, E31/P31x_A_So and E31/P31x_A_Sk . 78
G.5.5 E31to P31e adaptation functions, E31/P31e_A_So and E31/P31e_A_Sk. 79
G.5.6 E31 to P31s adaptation functions, E31/P31s_A_So and E31/P31s_A_Sk . 80
G.6 E31 layer defect, fault and performance monitoring tables.81
G.6.1 Port status management . 81
G.6.2 Defect detection and clearance criteria . 82
G.6.3 Consequent action activation and clearance criteria . 82
G.6.4 Defect correlation . 83
Annex H (normative): ICS proforma for E22 electrical section layer.84
H.1 Identification of the implementation.84
H.1.1 Date of the statement . 84
H.1.2 IUT identification . 84
H.1.3 SUT identification. 84
H.1.4 Product supplier. 85
H.1.5 Client . 85
H.1.6 ICS contact person. 86
H.2 Identification of the EN.86
H.3 Global statement of conformance of E22 layer .86
H.4 E22 layer description .87
H.5 E22 layer transmission tables.87
H.5.1 E22 layer data stream. 87
H.5.2 E22 layer connection function, E22_C . 87
H.5.3 E22 layer trail termination functions, E22_TT_So and E22_TT_Sk. 88
H.5.4 E22 to P22x adaptation functions, E22/P22x_A_So and E22/P22x_A_Sk . 89
H.5.5 E22to P22e adaptation functions, E22/P22e_A_So and E22/P22e_A_Sk. 90
H.6 E22 layer defect, fault and performance monitoring tables.91
H.6.1 Port status management . 91
H.6.2 Defect detection and clearance criteria . 91
H.6.3 Consequent action activation and clearance criteria . 92
H.6.4 Defect correlation . 93
Annex J (normative): ICS proforma for E12 electrical section layer.94
J.1 Identification of the implementation.94
J.1.1 Date of the statement . 94
J.1.2 IUT identification . 94
J.1.3 SUT identification. 94
J.1.4 Product supplier. 95
J.1.5 Client . 95
J.1.6 ICS contact person. 96
ETSI
7 EN 300 417-2-2 V1.1.2 (1998-11)
J.2 Identification of the EN.96
J.3 Global statement of conformance of E12 layer .96
J.4 E12 layer description .97
J.5 E12 layer transmission tables.97
J.5.1 E12 layer data stream. 97
J.5.2 E12 electrical section connection function, E12_C . 97
J.5.3 E12layer trail termination functions, E12_TT_So and E12_TT_Sk. 98
J.5.4 E12 to P12x adaptation functions, E12/P12x_A_So and E12/P12x_A_Sk . 100
J.5.5 E12 to P12s adaptation functions, E12/P12s_A_So and E12/P12s_A_Sk . 101
J.6 E12 layer defect, fault and performance monitoring tables.104
J.6.1 Port status management . 104
J.6.2 Defect detection and clearance criteria . 104
J.6.3 Consequent action activation and clearance criteria . 105
J.6.4 Defect correlation . 106
Annex K (normative): ICS proforma for T12 electrical section layer.107
K.1 Identification of the implementation.107
K.1.1 Date of the statement . 107
K.1.2 IUT identification . 107
K.1.3 SUT identification. 107
K.1.4 Product supplier. 108
K.1.5 Client . 108
K.1.6 ICS contact person. 109
K.2 Identification of the EN.109
K.3 Global statement of conformance of T12 layer .109
K.4 T12 layer description .110
K.5 T12 layer transmission tables.110
K.5.1 T12 layer data stream. 110
K.5.2 T12layer connection function, T12_C . 110
K.5.3 T12layer trail termination functions, T12_TT_So and T12_TT_Sk. 110
K.5.4 T12 to SD adaptation functions, T12/SD_A_So and T12/SD_A_Sk . 111
K.6 T12 layer defect, fault and performance monitoring tables.111
K.6.1 Port status management . 112
K.6.2 Defect detection and clearance criteria . 112
K.6.3 Consequent action activation and clearance criteria . 112
K.6.4 Defect correlation . 113
Annex L (normative): ICS proforma for E0 electrical section layer.114
L.1 Identification of the implementation.114
L.1.1 Date of the statement . 114
L.1.2 IUT identification . 114
L.1.3 SUT identification. 114
L.1.4 Product supplier. 115
L.1.5 Client . 115
L.1.6 ICS contact person. 116
L.2 Identification of the EN.116
L.3 Global statement of conformance of E0 layer .116
L.4 E0 layer description .117
L.5 E0 layer transmission tables.117
L.5.1 E0 layer data stream. 117
L.5.2 E0 layer connection function, E0_C . 117
ETSI
8 EN 300 417-2-2 V1.1.2 (1998-11)
L.5.3 E0 layer trail termination functions, E0_TT_So and E0_TT_Sk. 118
L.5.4 E0 to P0s adaptation functions, E0/P0s_A_So and E0/P0s_A_Sk . 119
L.6 E0 layer defect, fault and performance monitoring tables.120
L.6.1 Port status management . 120
L.6.2 Defect detection and clearance criteria . 120
L.6.3 Consequent action activation and clearance criteria . 120
L.6.4 Defect correlation . 121
Bibliography.122
History.123
ETSI
9 EN 300 417-2-2 V1.1.2 (1998-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmission
and Multiplexing (TM).
The present document is one of a family of documents that has been produced in order to provide inter-vendor and
inter-operator compatibility of Synchronous Digital Hierarchy (SDH) equipment.
The present document is part 2-2 of a multi-part EN covering the Generic requirements of transport functionality of
equipment, as identified below:
Part 1-1: "Generic processes and performance".
Part 1-2: "General information about Implementation Conformance Statement (ICS) proforma".
Part 1-3 "Generic processes and performance; Abstract Test Suite (ATS)".
Part 2-1: "Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section
layer functions".
Part 2-2: "Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical
section layer functions; Implementation Conformance Statement (ICS) proforma specification".
Part 2-3: "Synchronous Digital Hierarchy (SDH) and Plesiochronous Digital Hierarchy (PDH) physical section
layer functions; Abstract Test Suite (ATS)".
Part 3-1: "Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions".
Part 3-2: "Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions;
Implementation Conformance Statement (ICS) proforma specification".
Part 3-3: "Synchronous Transport Module-N (STM-N) regenerator and multiplex section layer functions; Abstract
Test Suite (ATS)".
Part 4-1: "Synchronous Digital Hierarchy (SDH) path layer functions".
Part 4-2: "Synchronous Digital Hierarchy (SDH) path layer functions; Implementation Conformance Statement
(ICS) proforma specification".
Part 4-3: "Synchronous Digital Hierarchy (SDH) path layer functions; Abstract Test Suite (ATS)".
Part 5-1: "Plesiochronous Digital Hierarchy (PDH) path layer functions".
Part 5-2: "Plesiochronous Digital Hierarchy (PDH) path layer functions; Implementation Conformance Statement
(ICS) proforma specification".
Part 5-3: "Plesiochronous Digital Hierarchy (PDH) path layer functions; Abstract Test Suite (ATS)".
Part 6-1: "Synchronization layer functions".
ETSI
10 EN 300 417-2-2 V1.1.2 (1998-11)
Part 6-2: "Synchronization layer functions; Implementation Conformance Statement (ICS) proforma specification".
Part 6-3: "Synchronization layer functions; Abstract Test Suite (ATS)".
Part 7-1: "Auxiliary layer functions".
Part 7-2: "Auxiliary layer functions; Implementation Conformance Statement (ICS) proforma specification".
Part 7-3: "Auxiliary layer functions; Abstract Test Suite (ATS)".
Parts 2 to 7 specify the layers and their atomic functions.
NOTE 1: The present document does not currently address configuration management.
NOTE 2: The SDH radio equipment functional blocks are addressed by ETSI WG TM4.
Various of the above parts have previously been published as parts of ETS 300 417.
They have been converted to parts of EN 300 417 without technical changes, but some editorial changes have been
necessary (e.g. references). In particular:
- Parts 2-1 and 3-2 have been modified to take account of editorial errors present in edition 1.
- Part 1-1 has had its title change of to align with other parts published at a later date.
Also note that in the meantime parts 8-1, 8-2 and 8-3 have been stopped.
Transposition dates
Date of adoption of this EN: 24 October 1997
Date of latest announcement of this EN (doa): 28 February 1998
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 1998
Date of withdrawal of any conflicting National Standard (dow): 31 August 1998
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a telecommunication specification. Such a statement is called an Implementation
Conformance Statement (ICS).
A client of a test laboratory who requests a conformance / approval test shall provide to the test laboratory a completed
ICS proforma for each layer to be tested and a detailed system description of the implementation.
The ICS proforma is not another complete description of the related
...