SIST ETS 300 098-2:1996

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Connected Line Identification Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 098-2 Edition 1SIST ETS 300 098-2:1996en01-GHFHPEHU-1996SIST ETS 300 098-2:1996SLOVENSKI
STANDARD



PSIST ETS 300 098-2:1996



EUROPEANETS 300 098-2TELECOMMUNICATIONSeptember 1995STANDARDSource: ETSI TC-SPSReference: DE/SPS-05028-MICS:33.080Key words:ISDN, supplementary service, PICSIntegrated Services Digital Network (ISDN);Connected Line Identification Restriction (COLR)supplementary service;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specificationETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1995. All rights reserved.PSIST ETS 300 098-2:1996*



Page 2ETS 300 098-2: September 1995Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Standards Approval Dept." at the address shown on the title page.PSIST ETS 300 098-2:1996



Page 3ETS 300 098-2: September 1995ContentsForeword.51Scope.72Normative references.73Definitions.84Symbols and abbreviations.85Conformance.9Annex A (normative):PICS proforma.10A.1Instructions for completing the PICS proforma.10A.1.1Identification of the implementation.10A.1.2Global statement of conformance.10A.1.3Explanation of PICS proforma subclauses.10A.1.4Symbols, abbreviations and terms.11A.2Identification of the implementation.11A.2.1Implementation Under Test (IUT) identification.11A.2.2System Under Test (SUT) identification.11A.2.3Product supplier.12A.2.4Client.12A.2.5PICS contact person.13A.3PICS/System Conformance Statement (SCS).13A.4Identification of the protocol.13A.5Global statement of conformance.14A.6Roles.14A.7User.15A.7.1Major capabilities.15A.7.2Subsidiary capabilities.15A.7.3Protocol data units.15A.7.4Protocol data unit parameters.15A.7.5Timers.15A.7.6Call states.15A.8Network.16A.8.1Major capabilities.16A.8.2Subsidiary capabilities.16A.8.3Protocol data units.16A.8.4Protocol data unit parameters.16A.8.5Timers.16A.8.6Call states.16PSIST ETS 300 098-2:1996



Page 4ETS 300 098-2: September 1995Annex B (normative):Requirements list.17B.1User.17B.1.1Requirements on items used in the basic call PICS.17B.1.2Requirements on items used in the supplementary service interactions PICS.17B.2Network.17B.2.1Requirements on items used in the basic call PICS.17B.2.2Requirements on items used in the supplementary service interactions PICS.17History.18PSIST ETS 300 098-2:1996



Page 5ETS 300 098-2: September 1995ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) Connected LineIdentification Restriction (COLR) supplementary service, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"TSS&TP specification for the network";Part 6:"ATS and partial PIXIT proforma specification for the network".NOTE:The first part, ETS 300 098-1 (1992), containing the protocol specification, was initiallypublished as ETS 300 098 (1992) and has identical contents.To evaluate conformance of a particular implementation, it is necessary to have a statement of whichcapabilities and options have been implemented for a given Open Systems Interconnection (OSI)protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).Transposition datesDate of adoption of this ETS:1 September 1995Date of latest announcement of this ETS (doa):31 December 1995Date of latest publication of new National Standardor endorsement of this ETS (dop/e):30 June 1996Date of withdrawal of any conflicting National Standard (dow):30 June 1996PSIST ETS 300 098-2:1996



Page 6ETS 300 098-2: September 1995Blank pagePSIST ETS 300 098-2:1996



Page 7ETS 300 098-2: September 19951ScopeThis second part of ETS 300 098 is applicable to the stage three of the Connected Line IdentificationRestriction (COLR) supplementary service for the pan-European Integrated Services Digital Network(ISDN) as provided by European public telecommunications operators at the T reference point orcoincident S and T reference point (as defined in ITU-T Recommendation I.411 [11]) by means of theDigital Subscriber Signalling System No. one (DSS1) protocol. Stage three identifies the protocolprocedures and switching functions needed to support a telecommunications service (see CCITTRecommendation I.130 [10]).This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDNDSS1 COLR supplementary service protocol as specified in ETS 300 098-1 [2] in compliance with therelevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [9].The supplier of a protocol implementation which is claimed to conform to ETS 300 098-1 [2] is required tocomplete a copy of the PICS proforma provided in annex A of this ETS and is required to provide theinformation necessary to identify both the supplier and the implementation.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 097-1 (1992): "Integrated Services Digital Network (ISDN); ConnectedLine Identification Presentation (COLP) supplementary service; DigitalSubscriber Signalling System No. one (DSS1) protocol; Part 1: Protocolspecification".NOTE 1:ETS 300 097-1 (1992) was initially published as ETS 300 097 (1992).[2]ETS 300 098-1 (1992): "Integrated Services Digital Network (ISDN); ConnectedLine Identification Restriction (COLR) supplementary service; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 1: Protocol specification".NOTE 2:ETS 300 098-1 (1992) was initially published as ETS 300 098 (1992).[3]ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-networkinterface layer 3; Specifications for basic call control".[4]ETS 300 195-1 (1995): "Integrated Services Digital Network (ISDN);Supplementary service interactions; Digital Subscriber Signalling System No.one (DSS1) protocol; Part 1: Protocol specification".[5]ETS 300 195-2: "Integrated Services Digital Network (ISDN); Supplementaryservice interactions; Digital Subscriber Signalling System No. one (DSS1)protocol; Part 2: Protocol Implementation Conformance Statement (PICS)proforma specification".[6]I-ETS 300 314 (1994): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1); Protocol ImplementationConformance Statement (PICS) proforma specification for the network layersignalling protocol for circuit-mode basic call control (basic access, user)".[7]I-ETS 300 315 (1994): "Integrated Services Digital Network (ISDN); DigitalSubscriber Signalling System No. one (DSS1); Protocol ImplementationConformance Statement (PICS) proforma specification for the network layersignalling protocol for circuit-mode basic call control (primary rate access,user)".PSIST ETS 300 098-2:1996



Page 8ETS 300 098-2: September 1995[8]ISO/IEC 9646-1: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 1: General concepts".[9]ISO/IEC 9646-7: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 7: ImplementationConformance Statements".[10]CCITT Recommendation I.130 (1988): "Method for the characterization oftelecommunication services supported by an ISDN and network capabilities ofan ISDN".[11]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".3DefinitionsFor the purposes of this ETS, the following definitions apply, in addition to those given inETS 300 098-1 [2]:Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of anOpen Systems Interconnection (OSI) implementation or system, stating which capabilities have beenimplemented for a given OSI protocol (see ISO/IEC 9646-1 [8]).PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier orconformance test suite specifier, which, when completed for an OSI implementation or system, becomesthe PICS (see ISO/IEC 9646-1 [8]).static conformance review: A review of the extent to which the static conformance requirements are metby the IUT, accomplished by comparing the PICS with the static conformance requirements expressed inthe relevant standard(s) (see ISO/IEC 9646-1 [8]).4Symbols and abbreviationsFor the purposes of this ETS, the following abbreviations apply:ANDBoolean "and"COLPConnected Line Identification PresentationCOLRConnected Line Identification RestrictionDSS1Digital Subscriber Signalling System No. oneISDNIntegrated Services Digital NetworkIUTImplementation Under TestMMandatory requirement (to be observed in all cases)MCMajor CapabilitiesMTMessages TransmittedN/ANot applicable, not supported or the conditions for status are not metNonot supportedNOTBoolean "not"OOption (may be selected to suit the implementation, provided that anyrequirements applicable to the option are observed)O.nOptions, but support required for either at least one or only one of the options inthe group labelled with the same numeral "n"PSIST ETS 300 098-2:1996



Page 9ETS 300 098-2: September 1995ORBoolean "or"OSIOpen Systems InterconnectionPParametersPICSProtocol Implementation Conformance StatementRRolesRLRequirements ListSCSSystem Conformance StatementSSSupplementary ServiceSUTSystem Under TestYessupported5ConformanceA PICS proforma which conforms to this PICS proforma specification shall be technically equivalent toannex A, and shall preserve the numbering and ordering of the items in annex A.A PICS which conforms to this PICS proforma specification shall:a)describe an implementation which claims to conform to ETS 300 098-1 [2];b)be a conforming ICS proforma which has been completed in accordance with the instructions forcompletion given in clause A.1;c)include the information necessary to uniquely identify both the supplier and the
implementation.PSIST ETS 300 098-2:1996



Page 10ETS 300 098-2: September 1995Annex A (normative):PICS proformaNotwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants thatusers of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for itsintended purposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the Implementation Under Test (IUT) and the system in which it resides (the SystemUnder Test (SUT)) should be filled in so as to provide as much detail as possible regarding versionnumbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as thecontact person.The SCS as defined in ISO/IEC 9646-1 [8] is a document supplied by the client or product supplier thatsummarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or otherstandards are implemented and to which conformance is claimed. The PICS/SCS subclause shoulddescr
...