iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 17038-2:2019/AC:2020

(Corrigendum)

Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

TC and CCMC - Correction of heading in 5.2.3 and corrections in formula cross references in 6.3.4 and 6.3.5

Pumpen - Methoden zur Qualifikation und Verifikation des Energieeffizienzindexes für Kreiselpumpen - Teil 2: Prüfung und Berechnung des Energieeffizienzindexes (EEI) einzelner Pumpenaggregate

Pompes - Méthodes de qualification et de vérification de l'indice de rendement énergétique des groupes motopompes rotodynamiques - Partie 2 : Essais et calcul de l'indice de rendement énergétique (EEI) des groupes motopompes simples

Črpalke - Metode za kvalifikacijo in verifikacijo indeksa energijske učinkovitosti centrifugalnih črpalk - 2. del: Preskušanje in računanje indeksa energijske učinkovitosti (IEE) enodelnih črpalk - Popravek AC

General Information

Status
Withdrawn
Publication Date
19-Jul-2020
Withdrawal Date
09-May-2024
ICS
23.080 - Pumps
27.015 - Energy efficiency. Energy conservation in general
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-May-2024
Due Date
01-Jun-2024
Completion Date
10-May-2024
Ref Project
EN 17038-2:2019/AC:2020 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

Relations

Replaced By
SIST EN 17038-2:2019/AC:2021 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
Effective Date
16-Feb-2022
Corrects
SIST EN 17038-2:2019 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units
Effective Date
11-May-2020

Buy Standard

EN 17038-2:2019/AC:2020EN 17038-2:2019/AC:2020
PreviousNext
Corrigendum
EN 17038-2:2019/AC:2020
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17038-2:2019/AC:2020
01-september-2020
Črpalke - Metode za kvalifikacijo in verifikacijo indeksa energijske učinkovitosti
centrifugalnih črpalk - 2. del: Preskušanje in računanje indeksa energijske
učinkovitosti (IEE) enodelnih črpalk - Popravek AC
Pumps - Methods of qualification and verification of the Energy Efficiency Index for
rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI)
of single pump units
Pumpen - Methoden zur Qualifikation und Verifikation des Energieeffizienzindexes für
Kreiselpumpen - Teil 2: Prüfung und Berechnung des Energieeffizienzindexes (EEI)
einzelner Pumpenaggregate
Pompes - Méthodes de qualification et de vérification de l'indice de rendement
énergétique des groupes motopompes rotodynamiques - Partie 2 : Essais et calcul de
l'indice de rendement énergétique (EEI) des groupes motopompes simples
Ta slovenski standard je istoveten z: EN 17038-2:2019/AC:2020
ICS:
23.080 Črpalke Pumps
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
SIST EN 17038-2:2019/AC:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17038-2:2019/AC:2020

---------------------- Page: 2 ----------------------
SIST EN 17038-2:2019/AC:2020


EUROPEAN STANDARD EN 17038-2:2019/AC

NORME EUROPÉENNE
July 2020

EUROPÄISCHE NORM
ICS 23.080
English version

Pumps - Methods of qualification and verification of the Energy Efficiency
Index for rotodynamic pump units - Part 2: Testing and calculation of Energy
Efficiency Index (EEI) of single pump units
Pompes - Méthodes de qualification et de Pumpen - Methoden zur Qualifikation und
vérification de l'indice de rendement Verifikation des Energieeffizienzindexes für
énergétique des groupes motopompes Kreiselpumpen - Teil 2: Prüfung und
rotodynamiques - Partie 2 : Essais et calcul de Berechnung des Energieeffizienzindexes
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17038-4:2024(Main)
Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units
EN 17038-4:2023

This document specifies methods and procedures for testing, calculating, and determining the Energy
Efficiency Index (EEI) of submersible multistage pump units.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-2:2019/AC:2021(Corrigendum)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
EN 17038-2:2019/AC:2021

This document specifies methods and procedures for testing, calculating and determining the Energy Efficiency Index (EEI) of rotodynamic glanded single pump units for pumping clean water, including where integrated in other products.
The pump types and sizes covered by this document are described in the normative Annex A.

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-1:2019/AC:2021(Corrigendum)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
EN 17038-1:2019/AC:2021

TC origin: text change in text below Figure A.3 and correction of Formula (C.3)

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-1:2019(Main)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
EN 17038-1:2019

This document covers pump units consisting of:
-   one single or several rotodynamic water pump(s), including where integrated in other products, and driven by a motor system, consisting of an electrical motor and
-   either a terminal box which only enables to operate the pump unit at constant motor stator frequency and thereby (nearly) constant rotational speed,
-   or a CDM (Complete Drive Module) which enables to operate the pump unit at variable rotational speed depending on a varying demand of flow rate and/or discharge or differential pressure.
NOTE 1   A motor system which consists of an electric motor and a CDM is also called PDS (Power Drive System).
NOTE 2   A CDM is also often called VSD (Variable Speed Drive).
Pump units as defined above are treated as extended products in respect to their energy efficiency.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-2:2019(Main)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units
EN 17038-2:2019

This European standard specifies methods and procedures for testing, calculating and determining the Energy Efficiency Index (EEI) of rotodynamic glanded single pump units for pumping clean water, including where integrated in other products.
The pump types and sizes covered by this standard are described in the normative Annex A.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14414:2019(Main)
Pump system energy assessment (ISO/ASME 14414:2019)
EN ISO 14414:2019

This document sets the requirements for conducting and reporting the results of a pumping system
energy assessment (hereafter referenced as “assessment”) that considers the entire pumping system,
from energy inputs to the work performed as the result of these inputs.
The objective of a pumping system energy assessment is to determine the current energy consumption
of an existing system and identify ways to improve system efficiency.
These requirements consist of
— organizing and conducting an assessment,
— analysing the data from the assessment, and
— reporting and documenting assessment findings.
This document is designed to be applied, to open and closed loop pumping systems typically used at
industrial, institutional, commercial, and municipal facilities, when requested.
This document is focused on assessing electrically-driven pumping systems, which are dominant in
most facilities, but is also applicable with other types of drivers, such as steam turbines and engines.
The document does not
a) specify how to design a pumping system,
b) give detailed qualifications and expertise required of the person using the International Standard
although provides a list of body of knowledge in Annex C,
c) address the training or certification of persons,
d) specify how to implement the recommendations developed during the assessment, but does include
requirements for an action plan,
e) specify how to measure and validate the energy savings that result from implementing assessment
recommendations,
f) specify how to make measurements and how to calibrate test equipment used during the
assessment,
g) specify how to estimate the implementation cost or conduct financial analysis for recommendations
developed during the assessment,
h) specify specific steps required for safe operation of equipment during the assessment. The facility
personnel in charge of normal operation of the equipment are responsible for ensuring that it is
operated safely during the data collection phase of the assessment,
i) address issues of intellectual property, security, confidentiality, and safety.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-4:2024(Main)
Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units
EN 17038-4:2023

This document specifies methods and procedures for testing, calculating, and determining the Energy
Efficiency Index (EEI) of submersible multistage pump units.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-1:2019/AC:2021(Corrigendum)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
EN 17038-1:2019/AC:2021

TC origin: text change in text below Figure A.3 and correction of Formula (C.3)

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-2:2019/AC:2021(Corrigendum)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
EN 17038-2:2019/AC:2021

This document specifies methods and procedures for testing, calculating and determining the Energy Efficiency Index (EEI) of rotodynamic glanded single pump units for pumping clean water, including where integrated in other products.
The pump types and sizes covered by this document are described in the normative Annex A.

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-1:2019(Main)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
EN 17038-1:2019

This document covers pump units consisting of:
-   one single or several rotodynamic water pump(s), including where integrated in other products, and driven by a motor system, consisting of an electrical motor and
-   either a terminal box which only enables to operate the pump unit at constant motor stator frequency and thereby (nearly) constant rotational speed,
-   or a CDM (Complete Drive Module) which enables to operate the pump unit at variable rotational speed depending on a varying demand of flow rate and/or discharge or differential pressure.
NOTE 1   A motor system which consists of an electric motor and a CDM is also called PDS (Power Drive System).
NOTE 2   A CDM is also often called VSD (Variable Speed Drive).
Pump units as defined above are treated as extended products in respect to their energy efficiency.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day