SIST EN IEC 60068-3-4:2023
(Main)Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests (IEC 60068-3-4:2023)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests (IEC 60068-3-4:2023)
IEC 60068-3-4:2023 is available as IEC 60068-3-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60068-3-4:2023 provides the necessary information and the basic principles of the effect of humidity in the context of environmental testing to assist in preparing relevant specifications, such as standards for components or equipment. Furthermore, information is provided on operating climatic test chambers. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) the requirements for distilled and deionized water have been revised;
b) recommendations for the cleaning procedure of test chambers have been included;
c) humidification systems (ultrasonic humidifiers and atomizers) have been added;
d) the description of water penetration mechanisms has been refined.
Umweltprüfungen - Teil 3-4: Unterstützende Dokumentation und Leitfaden - Prüfungen mit feuchter Wärme (IEC 60068-3-4:2023)
Essais d'environnement - Partie 3-4: Documentation d'accompagnement et recommandations - Essais de chaleur humide (IEC 60068-3-4:2023)
IEC 60068-3-4:2023 est disponible sous forme de IEC 60068-3-4:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 60068-3-4:2023 contient les informations nécessaires et les principes de base concernant les effets de l’humidité dans le contexte des essais d'environnement pour fournir un appui à l'élaboration des spécifications pertinentes (normes pour les composants ou les matériels, par exemple). Des informations relatives au fonctionnement des chambres climatiques d'essai sont également données. Cette deuxième édition annule et remplace la première édition parue en 2001. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) les exigences relatives à l'eau distillée et à l'eau déionisée ont été révisées;
b) des recommandations concernant la procédure de nettoyage des chambres d'essai ont été introduites;
c) des systèmes d'humidification (humidificateurs à ultrasons et atomiseurs) ont été ajoutés;
d) la description des mécanismes de pénétration d'eau a été affinée.
Okoljsko preskušanje - 3-4. del: Podporna dokumentacija in navodila - Vlažni toplotni preskusi (IEC 60068-3-4:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60068-3-4:2022
01-september-2022
Okoljsko preskušanje - 3-4. del: Podporna dokumentacija in navodilo - Vlažni
toplotni preskusi
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat
tests
Umweltprüfungen - Teil 3-4: Unterstützende Dokumentation und Leitfaden - Prüfungen
mit feuchter Wärme
Essais d'environnement - Partie 3-4: Documentation d'accompagnement et
recommandations - Essais de chaleur humide
Ta slovenski standard je istoveten z: prEN IEC 60068-3-4:2022
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
29.020 Elektrotehnika na splošno Electrical engineering in
general
oSIST prEN IEC 60068-3-4:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60068-3-4:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60068-3-4:2022
104/931/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60068-3-4 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-24 2022-09-16
SUPERSEDES DOCUMENTS:
104/910/CD, 104/923A/CC
IEC TC 104 : ENVIRONMENTAL CONDITIONS, CLASSIFICATION AND METHODS OF TEST
SECRETARIAT: SECRETARY:
Sweden Mr Henrik Lagerström
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60068-3-4:2022
IEC CDV 60068-3-4 © IEC 2022 2 104/931/CDV
1 CONTENTS
2
3 FOREWORD. 4
4 INTRODUCTION . 5
5 1 Scope . 5
6 2 Normative references . 5
7 3 Definitions . 5
8 4 Procedures for the production and control of humidity . 7
9 4.1 General . 7
10 4.2 Injection of water (spraying) . 7
11 4.3 Injection of water vapour (steam) . 7
12 4.4 Saturation type . 7
13 4.5 Surface evaporation. 8
14 4.6 Aqueous solutions . 8
15 4.7 Dehumidification . 8
16 4.8 Control of humidity . 8
17 5 Physical appearance of the effects of humidity . 8
18 5.1 Condensation . 8
19 5.2 Adsorptio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.