kSIST FprEN 747-1:2023
(Main)Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It applies to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor. Safety requirements for other products included in a bunk bed/high bed, for example a table or storage furniture, are not included in this document.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
The document contains one annex:
- Annex A (informative) - Rationales.
Möbel - Etagenbetten und Hochbetten - Teil 1: Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit
Dieses Dokument legt Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit von Etagenbetten und Hochbetten für den Wohn und Nicht Wohnbereich fest.
Es gilt für Etagenbetten und Hochbetten mit einer inneren Länge von mehr als 1 400 mm und einer Höchst¬breite des Bettbodens von 1 200 mm, bei denen sich die Oberseite des Bettbodens 600 mm oder mehr über der Stellfläche befindet. Sicherheitstechnische Anforderungen an andere Produkte, die bei einem Etagen¬bett/Hochbett mit enthalten sind, zum Beispiel ein Tisch oder Behältnismöbel, sind nicht in diesem Dokument enthalten.
Dieses Dokument gilt nicht für Etagenbetten und Hochbetten für besondere Zwecke, unter anderem, aber nicht nur, für Gefängnisse, Kasernen und Feuerwachen.
Das Dokument enthält einen Anhang:
- Anhang A (informativ) - Begründungen.
Meubles - Lits superposés et lits surélevés - Partie 1: Exigences de sécurité, de résistance et de durabilité
Le présent document spécifie les exigences relatives à la sécurité, à la résistance et à la durabilité des lits superposés et des lits surélevés à usage domestique et collectif.
Il s’applique aux lits superposés et aux lits surélevés dont la longueur intérieure est supérieure à 1 400 mm, dont la largeur du sommier est inférieure ou égale à 1 200 mm et dont la face supérieure du sommier se trouve au moins à 600 mm au-dessus du sol. Les exigences de sécurité relatives aux autres articles inclus dans un lit superposé/surélevé (par exemple, une table ou un meuble de rangement) ne sont pas indiquées dans le présent document.
Le présent document ne s’applique pas aux lits superposés et lits surélevés utilisés à des fins particulières, notamment ceux destinés à être utilisés en environnement carcéral ou militaire, ou à usage du corps des sapeurs-pompiers.
Le présent document contient une annexe :
- Annexe A (informative) - Justifications.
Pohištvo - Pogradi in visoke postelje - 1. del: Zahteve za varnost, trdnost in trajnost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 747-1:2022
01-september-2022
Pohištvo - Pogradi in visoke postelje - 1. del: Zahteve za varnost, trdnost in
trajnost
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability
requirements
Möbel - Etagenbetten und Hochbetten - Teil 1: Anforderungen an die Sicherheit,
Festigkeit und Dauerhaltbarkeit
Meubles - Lits superposés et lits surélevés - Partie 1: Exigences de sécurité, de
résistance et de durabilité
Ta slovenski standard je istoveten z: prEN 747-1
ICS:
97.140 Pohištvo Furniture
oSIST prEN 747-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 747-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN 747-1:2022
DRAFT
EUROPEAN STANDARD
prEN 747-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2022
ICS 97.140 Will supersede EN 747-1:2012+A1:2015
English Version
Furniture - Bunk beds and high beds - Part 1: Safety,
strength and durability requirements
Meubles - Lits superposés et lits surélevés - Partie 1: Möbel - Etagenbetten und Hochbetten - Teil 1:
Exigences de sécurité, de résistance et de durabilité Anforderungen an die Sicherheit, Festigkeit und
Dauerhaltbarkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 207.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 747-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 747-1:2022
prEN 747-1:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Safety requirements . 5
4.1 Construction . 5
4.1.1 General . 5
4.1.2 Accessible holes, gaps and openings . 8
4.1.3 Bed base(s) . 8
4.1.4 Safety barriers around upper beds . 10
4.1.5 Means of access .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.