iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 400.2A S1:1995

(Main)

Hand-held motor operated tools -- Part II: Particular specifications -- Section A: Drills

Hand-held motor operated tools -- Part II: Particular specifications -- Section A: Drills

Superseded by EN 50144-2-1:1995

Handgeführte Elektrowerkzeuge -- Teil II: Besondere Bestimmungen -- Hauptabschnitt A: Bohrmaschinen

Outils portatifs à main à moteur -- Partie II: Règles particulières -- Section A: Perceuses

Hand held motor operated tools - Part 2: Particular specifications - Section A: Drills

General Information

Status
Withdrawn
Publication Date
28-Feb-1995
Withdrawal Date
30-Nov-1996
ICS
25.080.40 - Drilling machines
25.140.20 - Electric tools
Technical Committee
VGA - Safety of household and similar electrical appliances
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-1996
Due Date
01-Dec-1996
Completion Date
01-Dec-1996
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
HD 400.2A S1:1980/A1:1994 - Hand-held motor operated tools - Part II: Particular specifications - Section A: Drills

Buy Standard

HD 400.2A S1:1995HD 400.2A S1:1995
PreviousNext
Standardization document
HD 400.2A S1:1995
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 400.2A S1:1995
01-marec-1995
Hand held motor operated tools - Part 2: Particular specifications - Section A:
Drills
Hand-held motor operated tools -- Part II: Particular specifications -- Section A: Drills
Handgeführte Elektrowerkzeuge -- Teil II: Besondere Bestimmungen -- Hauptabschnitt A:
Bohrmaschinen
Outils portatifs à main à moteur -- Partie II: Règles particulières -- Section A: Perceuses
Ta slovenski standard je istoveten z: HD 400.2A S1:1980/A1:1994
ICS:
25.080.40 Vrtalniki Drilling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST HD 400.2A S1:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 2 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 3 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 4 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 5 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 6 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 7 ----------------------

SIST HD 400.2A S1:1995

---------------------- Page: 8 ----------------------

SIST HD 400.2A S1:1995

----------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62841-2-1:2018/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A1:2022

DOW=DOR+48 months

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A12:2022

This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A1:2022

2020-12-14: Common mods to this EN IEC are included in prAA (PR=73229) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A12:2022

2020-12-14: This prAA represents common mods to EN IEC (PR=73190) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A11:2019(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A11:2019

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017)
EN 62841-2-1:2018

IEC 62841-2-1:2017 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3.
This standard does not apply to rotary hammers, even if they can be used as a drill.
This Part 2-1 is to be used in conjunction with the first edition of IEC 62841-1:2014.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication
Key words: Drill, Impact Drill, Hand-held tool, Safety

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A1:2022

DOW=DOR+48 months

  • Amendment
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A12:2022

This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A1:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A1:2022

2020-12-14: Common mods to this EN IEC are included in prAA (PR=73229) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-3-6:2014/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system
EN 62841-3-6:2014/A12:2022

2020-12-14: This prAA represents common mods to EN IEC (PR=73190) for simultaneous circulation
D164/C043: DOW=DOR+48 months

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day