SIST EN 300 494-3 V1.4.1:2003
(Main)Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)
- Abstract
Update historic references and receiver interference performance ( - 48 dBm) clause 4.4.5.
- Status
- Published
- Publication Date
- 30-Nov-2003
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Dec-2003
- Due Date
- 01-Dec-2003
- Completion Date
- 01-Dec-2003
SIST EN 300 494-3 V1.4.1:2003 is the Slovenian adoption of ETSI EN 300 494-3 Version 1.4.1. It is a test specification for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile (GAP) Fixed radio Termination (FT), used to check whether an implementation behaves consistently in conformance testing and approval testing.
The document is aimed at manufacturers, test laboratories, and others who need a repeatable way to test a DECT GAP FT implementation against the profile requirements.
What does SIST EN 300 494-3 V1.4.1:2003 specify?
SIST EN 300 494-3 V1.4.1:2003 specifies the test specification for DECT GAP Fixed Part applications, with the main goal of supporting air interface interoperability between equipment from different manufacturers in public, business, and residential environments. It organizes the material by protocol layer and by test-reporting form, so users can run tests and record results in a standard way.
The document uses the ISO/IEC 9646 conformance testing framework as its basis, except for Physical layer testing, where a text description is used instead. Test cases are derived from the DECT Common Interface (CI) Test Case Library (TCL), and the Profile Implementation eXtra Information for Testing (PIXIT) is based on the DECT CI PIXITs.
| Annex | What it covers |
|---|---|
| Annex A | Profile Implementation eXtra Information for Testing (PIXIT) proforma |
| Annex B | Profile Conformance Test Report (PCTR) proforma |
| Annex C | System Conformance Test Report (SCTR) proforma |
| Annex D | System Conformance Statement (SCS) proforma |
What are the key requirements of SIST EN 300 494-3 V1.4.1:2003?
SIST EN 300 494-3 V1.4.1:2003 splits testing into NWK, DLC, MAC and PHY layers. For the FT implementation, that means the reader can see which layer is being tested, which behavior is expected, and which test case index applies.
Layer-by-layer test coverage
Clause 4.1 covers the NWK layer, including call control, mobility management, and link control behavior. In practice, this means the FT implementation is tested for call set-up, release, timers, identity, authentication, location, access rights, key allocation, ciphering, and link establishment/release behavior.
Clause 4.2 covers the DLC layer, including C-plane Class A, Lb broadcast control, and U-plane Class 0. This matters because these tests check frame handling, acknowledgements, retransmission, and basic data transfer behavior.
Clause 4.3 covers the MAC layer, including downlink broadcast, paging, bearer setup, bearer handover, bearer release, data transfer, and LLME management. For a user, this shows whether the FT handles radio access procedures correctly under active and idle conditions.
Physical layer requirements
Clause 4.4 sets the PHY-related declarations and radio checks. The manufacturer declarations list support for Full slot for speech information, Sliding collision detection, and Physical channel availability. Clause 4.4.2 requires Normal Transmitted Power (NTP) to be greater than 80 mW per simultaneously active transceiver at nominal and extreme temperatures.
Clause 4.4.3 adds a receiver-input condition for sensitivity testing: the LT is set so that -86 dBm is present at the input of the IUT receiver. In practice, this fixes the radio test setup so receiver performance is checked at the intended signal level.
Additional PHY tests
Clause 5 adds two extra PHY test purposes. One checks receiver sensitivity tolerance across maximum and minimum transmitter deviation, with a bit error rate limit of 0.001. The other checks transmission of the Z-field by comparing received X and Z fields over 10 packets. These tests matter because they verify radio performance beyond the basic approval tests.
What terms does SIST EN 300 494-3 V1.4.1:2003 define?
- Implementation Under Test (IUT) - the device or protocol implementation being tested, here the FT.
- System Under Test (SUT) - the complete system being evaluated in the conformance process.
- Profile Implementation eXtra Information for Testing (PIXIT) - the profile-specific information needed to parameterize test cases.
- Profile Conformance Test Report (PCTR) - the report used to record profile test results for an IUT.
- System Conformance Test Report (SCTR) - the report used to summarize system-level conformance testing.
- System Conformance Statement (SCS) - the statement that identifies the system, profiles, and protocol references used.
- Normal Transmitted Power (NTP) - the transmitted power value used in the PHY power requirement.
Who uses SIST EN 300 494-3 V1.4.1:2003?
SIST EN 300 494-3 V1.4.1:2003 is used by DECT equipment manufacturers, conformance test laboratories, and approval or quality teams that need to test a GAP FT implementation. It is also useful to buyers or technical assessors who need a structured way to compare test evidence, since the annexes define the reporting forms used for test declarations and summaries.
What changed in SIST EN 300 494-3 V1.4.1:2003 from the previous edition?
SIST EN 300 494-3 V1.4.1:2003 is the Version 1.4.1 publication of EN 300 494-3. The history lists earlier stages of the document, including ETS 300 494-3 from 1996, Amendment 1 in 1998, a 1999 publication, and Version 1.4.0 from 2001.
Which standards are used with SIST EN 300 494-3 V1.4.1:2003?
- EN 300 444 - defines the DECT GAP profile that this test specification checks.
- EN 300 175-2 to EN 300 175-7 - provide the DECT Common Interface layers, identities and addressing, and security features used by the tests.
- ISO/IEC 9646-1 to ISO/IEC 9646-7 - provide the conformance testing methodology, terminology, and reporting framework.
- EN 300 176-1 - gives the radio approval test methods and the PHY measurement methods used by this part.
- EN 300 176-2 - is referenced for speech-related approval testing in the PHY context.
- EN 300 497-3, EN 300 497-5, EN 300 497-8, EN 300 497-9 - provide the test case library structures and abstract test suites used to derive the FT tests.
- ETS 300 474-2 - provides the FT profile ICS requirement list and proforma used for declarations.
What does the SIST EN 300 494-3 V1.4.1:2003 document contain?
The document contains structured test-suite tables for the NWK, DLC, MAC, and PHY layers, plus testcase indexes that identify the individual FT tests. It also contains the PHY-specific measurement descriptions, including transmitted power, receiver sensitivity, transmitter deviation tolerance, and Z-field transmission checks.
The annexes contain ready-to-use proformas for PIXIT, PCTR, SCTR, and SCS. In practice, these forms support test setup, parameter declaration, result recording, and conformance reporting for laboratory work and approval documentation.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 300 494-3 V1.4.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)". This standard covers: Update historic references and receiver interference performance ( - 48 dBm) clause 4.4.5.
Update historic references and receiver interference performance ( - 48 dBm) clause 4.4.5.
SIST EN 300 494-3 V1.4.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT). The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 300 494-3 V1.4.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.7Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 300 494-3 Version 1.4.1SIST EN 300 494-3 V1.4.1:2003en01-december-2003SIST EN 300 494-3 V1.4.1:2003SLOVENSKI
STANDARD
ETSIEN300494-3V1.4.1(2002-04)EuropeanStandard(Telecommunicationsseries)DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part3:ProfileSpecificTestSpecification(PSTS)-FixedradioTermination(FT)SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)2ReferenceREN/DECT-040209-3KeywordsDECT,GAP,PTS,testingETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://portal.etsi.org/tb/status/status.aspIfyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2002.Allrightsreserved.DECTTM,PLUGTESTSTMandUMTSTMareTradeMarksofETSIregisteredforthebenefitofitsMembers.TIPHONTMandtheTIPHONlogoareTradeMarkscurrentlybeingregisteredbyETSIforthebenefitofitsMembers.3GPPTMisaTradeMarkofETSIregisteredforthebenefitofitsMembersandofthe3GPPOrganizationalPartners.SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)3ContentsIntellectualPropertyRights.6Foreword.61Scope.72References.73Definitionsandabbreviations.93.1Definitions.93.2Abbreviations.94Relevanttestcaseslist.104.1Network(NWK)layer.104.1.1TestSuiteStructure(TSS).104.1.2Testcaseindex.114.2DataLinkControl(DLC)layer.144.2.1Testsuitestructure.144.2.2Testcaseindex.154.3MediumAccessControl(MAC)layer.164.3.1TestSuiteStructure.164.3.2Testcaseindex.174.4PHYsical(PHY)layer.184.4.1Manufacturerdeclarations.184.4.2NormalTransmittedPower(NTP).184.4.2.1VerdictcriteriaforIUTswithanintegralantenna.184.4.2.2VerdictcriteriaforIUTswithexternalantennaconnection(s).184.4.3RFPradioreceiversensitivity.184.4.4Void.184.4.5Void.185Additionaltestcaseslist.195.1Testpurposes.195.1.1NWKlayer.195.1.2DLClayer.195.1.3MAClayer.195.1.4PHYlayer.195.2Testcases.195.2.1NWKlayer.195.2.2DLClayer.195.2.3MAClayer.195.2.4PHYlayer.205.2.4.1Receiversensitivitytoleranceoftransmitterdeviationvariations.205.2.4.1.1Definition.205.2.4.1.2Testenvironment.205.2.4.1.3Methodofmeasurement.205.2.4.1.4Verdictcriteria.205.2.4.2TransmissionofZ-field.205.2.4.2.1Definition.215.2.4.2.2Testenvironment.215.2.4.2.3Methodofmeasurement.215.2.4.2.4Verdictcriteria.21AnnexA(normative):ProfileImplementationeXtraInformationforTesting(PIXIT)proforma.22A.1General.22A.2ProfileIXITRequirementsList(XRL).22A.2.1NWKlayerprotocol.22SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)4A.2.2DLClayerprotocol.22A.2.3MAClayerprotocol.22A.2.4PHYlayerprotocol.22A.3ProfilespecificIXIT.22A.3.1NWKlayer.22A.3.2DLClayer.22A.3.3MAClayer.23A.3.4PHYlayer.23A.3.5Configurationconstraints.23A.4Declarationoffeaturessupported.23A.4.1Networklayer.23AnnexB(normative):ProfileConformanceTestReport(PCTR)proforma.25B.1Identificationsummary.25B.1.1ProfileCTR.25B.1.2ImplementationUnderTest(IUT).26B.1.3Testingenvironment.26B.1.4Limitsandreservations.26B.1.5Comments.27B.2IUTconformancestatus.27B.3Staticconformancesummary.27B.4Dynamicconformancesummary.27B.5Staticconformancereviewreport.28B.6Testcampaignreport.28B.6.1NWKlayer.29B.6.2DLClayer.31B.6.3MAClayer.31B.6.4PHYlayer.32B.7Observations.32AnnexC(normative):SystemConformanceTestReport(SCTR)proforma.33C.1Identificationsummary.33C.1.1SystemConformanceTestReport(SCTR).33C.1.2Testlaboratory.33C.1.3Client.34C.1.4SystemUnderTest(SUT).34C.1.5Profile.34C.1.6Natureofconformancetesting.35C.1.7Limitsandreservations.35C.1.8Recordofagreement.35C.1.9Comments.35C.2Systemreportsummary.36C.2.1ProfiletestingsummaryforGAPNWKlayerFT.36C.2.2ProfiletestingsummaryforGAPDLClayerFT.37C.2.3ProfiletestingsummaryforGAPMAClayerFT.38C.2.4ProfiletestingsummaryforGAPPHYlayerFT.39AnnexD(normative):SystemConformanceStatement(SCS)proforma.40D.1Identificationsummary.40D.1.1SCSidentification.40D.1.2IUTidentification.40D.1.3Clientidentification.41D.1.4Supplieridentification.41D.1.5Manufactureridentification.42D.1.6Protocolsidentification.42SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)5D.1.7Profileidentification.42D.2Miscellaneoussysteminformation.43D.2.1Configuration.43D.2.2Otherinformation.43History.44SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)6IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://webapp.etsi.org/IPR/home.asp).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectDigitalEnhancedCordlessTelecommunications(DECT).Thepresentdocumentispart3ofamulti-partdeliverablecoveringtheGenericAccessProfile(GAP),asidentifiedbelow:Part1:"Summary";Part2:"ProfileSpecificTestSpecification(PSTS)-PortableradioTermination(PT)";Part3:"ProfileSpecificTestSpecification(PSTS)-FixedradioTermination(FT)".NationaltranspositiondatesDateofadoptionofthisEN:12April2002DateoflatestannouncementofthisEN(doa):31July2002DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31January2003DateofwithdrawalofanyconflictingNationalStandard(dow):31January2003SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)71ScopeThepresentdocumentcontainsthetestspecificationforDigitalEnhancedCordlessTelecommunications(DECT)GenericAccessProfile(GAP)FixedPart(FP)applications.ThemainobjectiveoftheGAPtestspecificationistoprovideapprovaltestsgivingahighprobabilityofairinterfaceinter-operabilitybetweendifferentmanufacturer'sequipmentindifferentenvironments(i.e.public,businessandresidential).TheISOstandardforthemethodologyofconformancetestingISO/IEC9646parts1to7[9]to[15]isusedasthebasisforthetestmethodology,andasthebasisforthetestcasespecification.ThisisconsideredtobeunsuitableforPhysicallayertesting,andthereforeatextdescriptionisused.ThetestcaseslistedinthepresentdocumenthavebeenderivedfromtheDECTCommonInterface(CI)TestCaseLibrary(TCL)[18]to[26].InadditionasfarasthePhysicallayerisconcernedEN300176parts1[16]and2[30]apply.AdditionalGAPspecifictestcasesareincludedwhererequired.TheProfileIXITisbasedontheDECTCIPIXITsspecifiedinEN300497[18]to[26].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300175-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part1:Overview".[2]ETSIEN300175-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part2:PhysicalLayer(PHL)".[3]ETSIEN300175-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part3:MediumAccessControl(MAC)layer".[4]ETSIEN300175-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part4:DataLinkControl(DLC)layer".[5]ETSIEN300175-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part5:Network(NWK)layer".[6]ETSIEN300175-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part6:Identitiesandaddressing".[7]ETSIEN300175-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);Part7:Securityfeatures".[8]ETSIEN300444:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP)".[9]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[10]ISO/IEC9646-2:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part2:Abstracttestsuitespecification".SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)8[11]ISO/IEC9646-3:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[12]ISO/IEC9646-4:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part4:Testrealization".[13]ISO/IEC9646-5:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[14]ISO/IEC9646-6:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part6:Protocolprofiletestspecification".[15]ISO/IEC9646-7:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".[16]ETSIEN300176-1:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part1:Radio".[17]ETSIEN300476(allparts):"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);ProtocolImplementationConformanceStatement(PICS)proforma".[18]ETSIEN300497-1:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part1:TestSuiteStructure(TSS)andTestPurposes(TP)forMediumAccessControl(MAC)layer".[19]ETSIEN300497-2:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part2:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-PortableradioTermination(PT)".[20]ETSIEN300497-3:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part3:AbstractTestSuite(ATS)forMediumAccessControl(MAC)layer-FixedradioTermination(FT)".[21]ETSIEN300497-4:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part4:TestSuiteStructure(TSS)andTestPurposes(TP)-DataLinkControl(DLC)layer".[22]ETSIEN300497-5:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part5:AbstractTestSuite(ATS)-DataLinkControl(DLC)layer".[23]ETSIEN300497-6:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part6:TestSuiteStructure(TSS)andTestPurposes(TP)-Network(NWK)layer-PortableradioTermination(PT)".[24]ETSIEN300497-7:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part7:AbstractTestSuite(ATS)forNetwork(NWK)layer-PortableradioTermination(PT)".[25]ETSIEN300497-8:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part8:TestSuiteStructure(TSS)andTestPurposes(TP)-Network(NWK)layer-FixedradioTermination(FT)".[26]ETSIEN300497-9:"DigitalEnhancedCordlessTelecommunications(DECT);CommonInterface(CI);TestCaseLibrary(TCL);Part9:AbstractTestSuite(ATS)forNetwork(NWK)layer-FixedradioTermination(FT)".[27]ETSIETS300474-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part1:PortableradioTermination(PT)".[28]ETSIETS300474-2:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfilerequirementlistandprofilespecificImplementationConformanceStatement(ICS)proforma;Part2:FixedradioTermination(FT)".SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)9[29]ETSIEN300494-1:"DigitalEnhancedCordlessTelecommunications(DECT);GenericAccessProfile(GAP);ProfileTestSpecification(PTS);Part1:Summary".[30]ETSIEN300176-2:"DigitalEnhancedCordlessTelecommunications(DECT);Approvaltestspecification;Part2:Speech".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninISO/IEC9646parts1to7[9]to[15],EN300175parts1to7[1]to[7]andEN300444[8]apply.3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ACAuthenticationCodeATSAbstractTestSuiteBERBitErrorRateCCCallControlCICommonInterfaceDCKDerivedCipherKeyDLCDataLinkControlEUTEquipmentUnderTestFPFixedPartFTFixedradioTerminationGAPGenericAccessProfileICSImplementationConformanceStatementIPUIInternationalPortableUserIdentityIUTImplementationUnderTestIXITImplementationeXtraInformationforTestingLCELinkControlEntityLLMELowerLayerManagementEntityLTLowerTesterMACMediumAccessControlMMMobilityManagementNLFNewLinkFlagNTPNormalTransmittedPowerNWKNetWorKPARKPortableAccessRightsKeyPHYPHYsicalPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPSTSProfileSpecificTestSpecificationPTPortableradioTerminationPTSProfileTestSpecificationRFPRadioFixedPartSARISecondaryAccessRightsIdentitySUTSystemUnderTestTPUITemporaryPortableUserIdentityTSSTestSuiteStructureSIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)104Relevanttestcaseslist4.1Network(NWK)layerThisclauseincludeslistsofthetestgroupsandabstracttestcasesrelevantforGAPProfileTestSpecification(PTS);NWKlayerFixedTermination(FT)derivedfromEN300497-9[26].NOTE:ReferenceswhennecessaryshallbemadebasedontheparticulartestcasenameuniquethroughalltestspecificationEN300497[18]to[26].4.1.1TestSuiteStructure(TSS)Table1TestSuiteStructureSuiteName:nwk_ftStandardsRef:EN300444[8];EN300497-9[26]ProfileICSRef:ETS300474-2[28]ProfileIXITRef:EN300494-3TestMethod:remoteComments:TestGroupReferenceTestGroupObjectiveFT/TocheckthebehaviouroftheNWKlayeroftheFT(IUT)FT/CC/TochecktheIUTCC-statemachinebehaviourFT/CC/IT/TocheckthattheIUTCC-statemachineprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingFT/CC/CA/LimitedtestingthattheobservablecapabilitiesoftheCCentityoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITFT/CC/BV/TotesttheCCentityoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemFT/CC/BV/OC/TochecktheIUT'sbehaviourstosetupanoutgoingcallFT/CC/BV/IC/TochecktheIUT'sbehaviourstosetupanincomingcallFT/CC/BV/CI/TochecktheIUT'sbehaviourininformationtransferproceduresFT/CC/BV/CR/TochecktheIUT'sbehaviourstoreleaseanoutgoing/incomingcallFT/CC/RSTochecktheIUT'sbehaviourduringcallrelatedsupplementaryserviceproceduresFT/CC/BO/TocheckthebehaviouroftheCCentityoftheIUTinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomestatesoftheCCproceduresFT/CC/BI/TocheckthebehaviouroftheCCentityoftheIUTinresponsetoinvalidmessagesFT/CC/TI/ToverifythattheIUTCCtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerFT/MM/TocheckthebehaviouroftheMobilityManagemententityoftheIUTFT/MM/IT/TocheckthattheMMentityoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingFT/MM/CA/LimitedtestingthattheobservablecapabilitiesoftheMMentityoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITFT/MM/BV/TotesttheMMentityoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemFT/MM/BV/ID/TochecktheIUT'sbehaviourconcerningidentityproceduresFT/MM/BV/AU/TochecktheIUT'sbehaviourconcerningtheauthenticationproceduresFT/MM/BV/LO/TochecktheIUT'sbehaviourconcerningthelocationproceduresFT/MM/BV/AR/TochecktheIUT'sbehaviourconcerningtheaccessrightsproceduresFT/MM/BV/KA/TochecktheIUT'sbehaviourconcerningthekeyallocationprocedureFT/MM/BV/CH/TochecktheIUT'sbehaviourconcerningthecipheringrelatedproceduresFT/MM/BO/TochecktheIUTbehaviourinresponsetothemessagesthataresyntacticallycorrectbutnotallowedtooccurinsomephaseoftheMMproceduresFT/MM/BI/TochecktheIUTinresponsetoinvalidMMmessagesFT/MM/TI/ToverifythattheIUTMMtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerFT/ME/TocheckthebehaviouroftheLLMEoftheIUTSIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)11TestSuiteStructureSuiteName:nwk_ftStandardsRef:EN300444[8];EN300497-9[26]ProfileICSRef:ETS300474-2[28]ProfileIXITRef:EN300494-3TestMethod:remoteComments:TestGroupReferenceTestGroupObjectiveFT/ME/IT/TocheckthatLLMEoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingFT/ME/CA/LimitedtestingthattheobservablecapabilitiesoftheLLMEoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITFT/ME/BV/TotesttheLLMEoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemFT/LC/TocheckthebehaviouroftheLCEoftheIUTFT/LC/IT/TocheckthatLCEoftheIUTprovidessufficientconformanceforpossibleinterconnectionwithouttryingtoperformthoroughtestingFT/LC/CA/LimitedtestingthattheobservablecapabilitiesoftheLCEoftheIUTareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITFT/LC/BV/TotesttheLCEoftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemFT/LC/BV/LE/TochecktheIUT'sbehaviourconcerningtheconnectionorientedlinkestablishmentproceduresFT/LC/BV/LR/TochecktheIUT'sbehaviourconcerningtheconnectionorientedlinkreleaseproceduresFT/LC/BI/TochecktheIUTinresponsetoinvalidLCEmessagesFT/LC/TI/ToverifythattheIUTLCEtimersarewithcorrectvaluesandtheIUTisreactingproperlytotheexpiryofatimerDetailedComments:Thesub-sub-groupswithidentifiersFT/xx/IT/andFT/xx/CA/donotincludetheirowntestcasesbutonlylistanappropriateselectionoftestsfromtherelevantsub-groupwithidentifierFT/xx/.4.1.2TestcaseindexTable2TestCaseIndexTestGroupReferenceTestCaseIdDescriptionFT/CC/BV/OC/TC_FT_CC_BV_OC_01Outgoingnormalcall;F-00toF-10;piece-wisediallingTC_FT_CC_BV_OC_06VerifythattheIUTcancorrectlyestablishafollowingoutgoingcallfromtheLTwhentheLThasuseSARIasthemeanstolocktotheIUTFT/CC/BV/IC/TC_FT_CC_BV_IC_01Incomingcall;F-00,F-06,F-07toF-10FT/CC/BV/CI/TC_FT_CC_BV_CI_01Incomingcall;<>eitherin{CC-SETUP}orin{CC-INFO}TC_FT_CC_BV_CI_02Outgoingnormalcall;F-02;{CC-INFO],<>,"Gotopulse"handlingTC_FT_CC_BV_CI_03Outgoingnormalcall;F-10;{CC_INFO},<>,"Gotopulse"handlingTC_FT_CC_BV_CI_04Outgoingnormalcall;F-02;{CC-INFO],<>,"diallingpause"handlingTC_FT_CC_BV_CI_05Outgoingnormalcall;F-10;{CC-INFO],<>,"Diallingpause"handlingTC_FT_CC_BV_CI_06Outgoingnormalcall;F-02;{CC-INFO],<>,"GotoDTMFdefinedtonelength"handlingTC_FT_CC_BV_CI_07Outgoingnormalcall;F-10;{CC-INFO],<>,"GotoDTMFdefinedtonelength"handlingTC_FT_CC_BV_CI_08Outgoingnormalcall;F-02;{CC-INFO],<>,"GotoDTMFinfinitetonelength"handlingTC_FT_CC_BV_CI_09Outgoingnormalcall;F-10;{CC-INFO],<>,"GotoDTMFinfinitetonelength"handlingSIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)12TestCaseIndexTestGroupReferenceTestCaseIdDescriptionTC_FT_CC_BV_CI_10Outgoingnormalcall;F-10;{CC-INFO],<>,"0-9,star,hashmark"handlingFT/CC/BV/CR/TC_FT_CC_BV_CR_01Outgoingnormalcall;F-02;IUTinitiatednormalreleaseTC_FT_CC_BV_CR_02F-10;IUTinitiatednormalreleaseTC_FT_CC_BV_CR_03Incomingcall;F-07;IUTinitiatednormalreleaseTC_FT_CC_BV_CR_04Outgoingcall;F-02;PTinitiatednormalreleaseTC_FT_CC_BV_CR_05F-10;PTinitiatednormalreleaseTC_FT_CC_BV_CR_06Incomingcall;F-07;PTinitiatednormalreleaseTC_FT_CC_BV_CR_07Incomingcall;F-07;PTinitiatedabnormalreleaseTC_FT_CC_BV_CR_08F-10;PTinitiatedabnormalreleaseTC_FT_CC_BV_CR_09Incomingcall;F-06;PTinitiatedabnormalreleaseTC_FT_CC_BV_CR_10F-10;PTinitiatedpartialreleaseFT/CC/RSTC_FT_CC_RS_07Incomingcall;T-00;{CC-SETUP},<>provision(CLIPsupport)FT/CC/BO/TC_FT_CC_BO_01F-02;unexpected{CC-SETUP}TC_FT_CC_BO_02F-19;receiptof{CC-RELEASE};releasecollisionshandlingFT/CC/BI/TC_FT_CC_BI_01F-00;{CC-SETUP}mandatoryI.E.missing;answeruponwith{CC-RELEASE-COM]TC_FT_CC_BI_02F-00;{CC-SETUP}wrongmandatoryI.E.answeruponwith{CC-RELEASE-COM]TC_FT_CC_BI_03F-00;{CC-SETUP}-likemessage,non{CC-SETUP}unrecognizedmessagetype;ignoreFT/CC/TI/TC_FT_CC_TI_01Outgoingcall;F-02;timerF-expiry(-10%margin);IUTsends{CC-RELEASE}TC_FT_CC_TI_02Outgoingcall;F-02;restartoftimerF-onreceiptof{CC-INFO}TC_FT_CC_TI_03Outgoingcall;F-19;timerF-expiry(-10%margin);IUTsends{CC-RELEASE-COM}TC_FT_CC_TI_04Outgoingcall;F-06;timerF-expiry(-10%margin);IUTsends{CC-RELEASE-COM}FT/MM/BV/ID/TC_FT_MM_BV_ID_01Identityrequestprocedure;IUTinitiatedFT/MM/BV/AU/TC_FT_MM_BV_AU_01AuthenticationofPT;PThasnostoredZAPvalueandserviceclassinfoTC_FT_MM_BV_AU_02AuthenticationofPT;ZAPincrement;PThasstoredZAPvalueandserviceclassinfo;PTauthenticatesFTbeforeansweringTC_FT_MM_BV_AU_03Authenticationofuser;PThasnostoredZAPvalueandserviceclassinfoTC_FT_MM_BV_AU_04AuthenticationofFTTC_FT_MM_BV_AU_05AuthenticationofFT;Unsupportedkeyrequested;IUTrejectsTC_FT_MM_BV_AU_06AuthenticationofPT;storeDCK;PThasnostoredZAPvalueandserviceclassinfoFT/MM/BV/LO/TC_FT_MM_BV_LO_01Locationregistration;a38=1atlockingandatthebeginningoftheprocedure;requestwithIPUITC_FT_MM_BV_LO_02Locationregistration;a38=1atlockingandatthebeginningoftheprocedure;requestwithunknownIPUI;rejectTC_FT_MM_BV_LO_03Locationregistration;a38=1atlockingandatthebeginningoftheprocedure;requestwithIPUI;IUTassignsTPUITC_FT_MM_BV_LO_05Locationupdate;a38=1atlocking;Locationregstartedupon1st{MM-INFO-SUGGEST}TC_FT_MM_BV_LO_06Locationregistration;a38=1atlocking;a38=0atthebeginningoftheprocedure;requestwithIPUITC_FT_MM_BV_LO_07Locationupdate;a38=1atlocking;Locationregstartedupon2nd{MM-INFO-SUGGEST}FT/MM/BV/AR/TC_FT_MM_BV_AR_01Obtainaccessrights;bothsidesuseACindication;IUTsendsthewholePARKTC_FT_MM_BV_AR_02Obtainaccessrights;serviceclassassignTC_FT_MM_BV_AR_03Terminateaccessrights;IUT(FT)initiated;PTauthenticatesFTTC_FT_MM_BV_AR_06Obtainaccessrights;bothsidesuseUAKindication;IUTsendsthewholePARKTC_FT_MM_BV_AR_07Obtainaccessrights;ZAPvalueassignSIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)13TestCaseIndexTestGroupReferenceTestCaseIdDescriptionFT/MM/BV/KA/TC_FT_MM_BV_KA_01Keyallocate;IUTinitiatedTC_FT_MM_BV_KA_02Keyallocate;IUTinitiated;"implicitPTauthentication"failure;IUTrejectsFT/MM/BV/CH/TC_FT_MM_BV_CH_01Cipherswitching;PTinitiated;"cipher-off"to"cipher-on"TC_FT_MM_BV_CH_02Cipherswitching;PTinitiated;"cipher-on"to"cipher-off"TC_FT_MM_BV_CH_03Cipherswitching;IUT(FT)initiated;"cipher-off"to"cipher-on"TC_FT_MM_BV_CH_04Cipherswitching;IUT(FT)initiated;"cipher-on"to"cipher-off"TC_FT_MM_BV_CH_05Cipherswitching;PTinitiatedwith"unsupportedcipherkey";IUTrejectsTC_FT_MM_BV_CH_08Cipherswitching;IUT(FT)initiated;"cipher-off"to"cipher-on"failsTC_FT_MM_BV_CH_09Cipherswitching;PTinitiated;"cipher-off"to"cipher-on"failsTC_FT_MM_BV_CH_10Cipherswitching;PTinitiated;"cipher-off"to"cipher-on"andintercellhandoverTC_FT_MM_BV_CH_11Cipherswitching;PTinitiated;"cipher-off"to"cipher-on"andintracellhandoverTC_FT_MM_BV_CH_12Cipherswitching;IUT(FT)initiated;"cipher-off"to"cipher-on"andintercellhandoverTC_FT_MM_BV_CH_13Cipherswitching;PTinitiated;"cipher-on"to"cipher-off"failsTC_FT_MM_BV_CH_14Cipherswitching;IUT(FT)initiated;"cipher-off"to"cipher-on"andintracellhandoverTC_FT_MM_BV_CH_15Cipherswitching;IUT(FT)initiated;"cipher-on"to"cipher-off"failsFT/MM/BO/TC_FT_MM_BO_01Cipherswitching;IUT(FT)initiated;ignoringunexpected{IDENTITY-REPLY}FT/MM/BITC_FT_MM_BI_02Obtainaccessrights;{ACCESS-RIGHTS-REQUEST}missing<>;IUTsends{ACCESS-RIGHTS-REJECT}TC_FT_MM_BI_03Obtainaccessrights;{ACCESS-RIGHTS-REQUEST}with<>exceedingthemax.allowedlength;IUTsends{ACCESS-RIGHTS-REJECT}FT/MM/TI/TC_FT_MM_TI_01Identityrequest;timerF-expiry(-10%margin)TC_FT_MM_TI_02AuthenticationofPT;timerF-expiry(-10%margin)TC_FT_MM_TI_03Authenticationofuser;timerF-expiry(-10%margin)TC_FT_MM_TI_04Terminateaccessrights;IUT(FT)initiated;timerF-expiry(-10%margin)TC_FT_MM_TI_05Keyallocation;timerF-expiry(-10%margin)TC_FT_MM_TI_06Cipherswitching;IUT(FT)initiated;timerF-expiry(margin:-20%)TC_FT_MM_TI_07LocationregistrationwithTPUIassignment;timerF-expiry(+5%margin)FT/ME/BV/TC_FT_ME_BV_01IncomingcallandauthenticationofFThandledinparallelTC_FT_ME_BV_02AuthenticationofuserinterruptedbyAuthenticationofFTTC_FT_ME_BV_03CCcallandlocationregistrationinparallelFT/LC/BV/LE/TC_FT_LC_BV_LE_01IndirectIUT(FT)linkestablishmentprocedure;correctPTanswerTC_FT_LC_BV_LE_02IndirectIUT(FT)linkestablishmentprocedure;{LCE-PAGE-RESPONSE}withmismatchingIPUI;IUTrejectsandreleasethelinkTC_FT_LC_BV_LE_03DirectPTinitiatedlinkestablishmentprocedureFT/LC/BV/LR/TC_FT_LC_BV_LR_01Linkexists;PTinitiated"normal"linkreleaseTC_FT_LC_BV_LR_02Linkexists;MMentityceasestousethelink;nootherentityusesthelink;IUTmaintainsthelinktimeTC_FT_LC_BV_LR_03Linkexists;CCcallisterminated;FTinitiatedlinkreleaseTC_FT_LC_BV_LR_04Linkexists;CCentityceasestousethelinkpartialreleaseagreed;nootherentityusesthelink;IUTmaintainsthelinktimeSIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)14TestCaseIndexTestGroupReferenceTestCaseIdDescriptionFT/LC/BI/TC_FT_LC_BI_01Protocoldiscriminatorvalueerror-unsupportedservice;IUTignoresTC_FT_LC_BI_04{AUTH-REQUEST}withillegaltransactionid.;ignoreTC_FT_LC_BI_07F-10;linkfails;IUTclearsthecallFT/LC/TI/TC_FT_LC_TI_02MMceasestousethelink;nootherentityusesthelink;timerexpiry(allowedperiod:(TSPX_lce_02-1000)msto10500ms)DetailedComments:TheFTistheIUT.4.2DataLinkControl(DLC)layerThisclauseincludeslistsofthetestgroupsandtheabstracttestcasesrelevantforGAPPTS-DLClayerFTderivedfromEN300497-5[22].4.2.1TestsuitestructureTable3TestSuiteStructureSuiteName:DLCStandardsRef:EN300444[8];EN300497-5[22]ProfileICSRef:ETS300474-2[28]ProfileIXITRef:EN300494-3TestMethod:remoteComments:TestGroupReferenceTestGroupObjectiveDLC/VerifythecorrectimplementationoftheFT(IUT)DLClayerDLC/C_Plane/VerifythecorrectimplementationoftheC-planedatalinkservicesDLC/C_Plane/ClassA/VerifythecorrectimplementationoftheLAPC'sClassAacknowledgedtransferoperationDLC/C_Plane/ClassA/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheLAPC'sClassAacknowledgedtransferoperationareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITDLC/C_Plane/ClassA/BV/TotestthebehaviouroftheIUTinresponsetosyntacticallyandcontextualcorrectbehaviourofthetestsystemDLC/C_Plane/ClassA/BI/TocheckthebehaviouroftheoftheIUTinresponsetoinvalidframesDLC/C_Plane/Lb/VerifythecorrectimplementationoftheLb(C-planebroadcastcontrol)entityDLC/C_Plane/Lb/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheLb(C-planebroadcastcontrol)entityareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITDLC/U_Plane/VerifythecorrectimplementationoftheU-planeservicesDLC/U_Plane/Class0/VerifythecorrectimplementationoftheClass0transmissionclassDLC/U_Plane/Class0/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheClass0transmissionclassserviceareinaccordancewiththestaticconformancerequirementsandtheadditionalcapabilitiesclaimedinthePROFILEICS/PROFILEIXITDetailedComments:SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)154.2.2TestcaseindexTable4TestCaseIndexTestGroupReferenceTestCaseIdDescriptionDLC/C_Plane/ClassA/CA/TC_A_CA_005I-FrameacknowledgementwithintimerTC_A_CA_006Re-transmissionofanI-FrameN250timesTC_A_CA_007refusalofaClassBlinkestablishmentRRresponseframewiththereservedLLNvalue"ClassAoperation"andNLFbitsetto"1";ClassAestablishedstateTC_A_CA_008ClassAestablishmentrequest;respondingandenteringintoClassAestablishedstateDLC/C_Plane/ClassA/BV/TC_A_BV_002I-Frameacknowledgement;sendingRRresponseframewithcorrectN(R)TC_A_BV_003I-Frameacknowledgement;acceptinganI-FramecommandwithcorrectN(S)andN(R)valuesasanacknowledgement.TC_A_BV_005Timerretransmissionphase;acceptanceofaRRresponseframewithcorrectN(R)valueasanacknowledgementTC_A_BV_006Timerretransmissionphase;acceptanceofanI-FramecommandwithcorrectN(S)andN(R)valuesasanacknowledgementTC_A_BV_007Connectionhandover;PTinitiatedintracellTC_A_BV_008Connectionhandover;PTinitiatedintercellDLC/C_Plane/ClassA/BI/TC_A_BI_004Informationtransferphase;discardingRRresponseframe,LLNindicatesB-class,invalidN(R);re-transmissiontheunacknowledgedI-FrameTC_A_BI_005Informationtransferphase;discardingRRresponseframe,NLF="0",invalidN(R);re-transmissiontheunacknowledgedI-FrameTC_A_BI_006ReceivedI-FramewithinvalidN(R);expiry;re-transmissiontheunacknowledgedI-FramewithupdatedN(R)TC_A_BI_007receiptofanI-FramewithinvalidN(S);sendingRRresponseframeorI-FramewiththeexpectedN(S);stops,ifnecessary,DL_04accordingtothereceivedN(R)TC_A_BI_008ReceiptofanI-FramewithinvalidN(S)andinvalidN(R);RRresponseframetransmission;unacknowledgedI-Framere-transmissionTC_A_BI_009Timerretransmissionphase;discardingRRresponseframe,LLNindicatesClass-B,NLF="0",invalidN(R);re-transmissiontheunacknowledgedI-FrameTC_A_BI_011Timerretransmissionphase;acceptingI-FramewithinvalidN(R);expiry;re-transmitstheunacknowledgedI-FramewithupdatedN(R)TC_A_BI_012Timerretransmissionphase;receiptofanI-FramewithinvalidN(S);RRresponseframeorI-Frame,expectedN(S);leavestimerretransmissionphaseTC_A_BI_013Retransmissionphase;receiptofanI-FramewithinvalidN(S)andinvalidN(R);sendingaRRresponseframe,expectedN(S);re-transmitstheunacknowledgedI-FrameDLC/C_Plane/Lb/CA/TC_L_CA_000generateashortbroadcastframe(3octets)DLC/U_Plane/Class0/CA/TC_0_CA_000IUTtransmissionofacorrectU-planeClass0frameTC_0_CA_001IUTreceptionofacorrectU-planeClass0frameDetailedComments:TheFTistheIUT.SIST EN 300 494-3 V1.4.1:2003
ETSIETSIEN300494-3V1.4.1(2002-04)164.3MediumAccessControl(MAC)layerThisclauseincludeslistsofthetestgroupsandtheabstracttestcasesrelevantforGAPPTS-MAClayerFTderivedfromEN300497-3[20].4.3.1TestSuiteStructureTable5TestSuiteStructureSuiteName:mac_ftStandardsRef:EN300444[8];EN300497-3[20]ProfileICSRef:ETS300474-2[28]ProfileIXITRef:EN300494-3TestMethod:remote(modified)Comments:TestGroupReferenceTestGroupObjectiveFT/VerifythecorrectimplementationoftheFT(IUT)MAClayerFT/DB/VerifythecorrectimplementationoftheDownlinkbroadcastservicesFT/DB/CA/LimitedtestingthattheobservablecapabilitiesoftheIUTconcerningtheDownlinkbroadcastserviceareinaccordancewiththestaticconformancerequirementsan
...