ISO 16366:2008
(Main)Tools for pressing - L-shaped guides
Tools for pressing - L-shaped guides
ISO 16366:2008 specifies the main dimensions and tolerances of L-shaped guiding bars, to be used in press tools. It also specifies the designation of L-shaped guiding bars.
Outillage de presse — Glissières de guidage en L
L'ISO 16366:2008 spécifie les dimensions principales et les tolérances des glissières de guidage en L, utilisées dans les outillages de presse. L'ISO 16366:2008 spécifie également la désignation des glissières de guidage en L.
General Information
- Status
- Published
- Publication Date
- 02-Mar-2008
- Technical Committee
- ISO/TC 29/SC 8 - Tools for pressing and moulding
- Drafting Committee
- ISO/TC 29/SC 8/WG 2 - Tools for pressing
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 08-Jul-2022
- Completion Date
- 13-Dec-2025
Relations
- Effective Date
- 15-Apr-2008
Overview
ISO 16366:2008 is an international standard published by the International Organization for Standardization (ISO) that defines specifications for L-shaped guiding bars used in press tools. These tools, essential in the field of metal pressing and molding, require precise components to ensure accurate and efficient operation. The standard sets out the main dimensions, tolerances, and designation system for L-shaped guiding bars to promote consistency, interoperability, and quality control across manufacturing and engineering applications.
Key elements of ISO 16366:2008 include:
- Standardized dimensions and tolerances for L-shaped guides.
- Specification of designation methods for these guiding bars.
- Guidelines on surface finishes and edge treatments.
This standard helps manufacturers, designers, and toolmakers to select or produce L-shaped guides that meet international quality and compatibility benchmarks.
Key Topics
Dimensions and Tolerances
ISO 16366:2008 specifies the critical dimensions and corresponding tolerances for L-shaped guiding bars, ensuring they fit precisely within press tool assemblies. The tolerance levels align with ISO 2768m (medium tolerance class for linear and angular dimensions), guaranteeing adequate precision without excessive manufacturing complexity.
Designation System
The standard includes a clear designation method for L-shaped guides, which incorporates:
- The term "L-shaped guiding bar."
- Reference to ISO 16366.
- The length (l) and height (h) dimensions in millimeters.
For example:
Glissière de guidage en L ISO 16366 - 100 × 55
Surface and Edge Quality
The standard references ISO 13715 for the treatment of undefined edges, ensuring that all edges on the guiding bars are safely finished to avoid damage or injury during handling and assembly. Surface roughness parameters are also specified, which is vital for guiding bar performance and longevity.
Material Considerations
While ISO 16366:2008 does not mandate specific materials, it recommends that selection be at the manufacturer's discretion, with examples such as bronze with graphite inserts provided. Material choice impacts wear resistance, load capacity, and compatibility with other press tool components.
Applications
L-shaped guiding bars conforming to ISO 16366:2008 are widely used in the manufacturing sector where press tools and molding equipment are employed. Key applications include:
- Metal Stamping and Pressing: Ensuring accurate tool movement and alignment during metal forming processes.
- Automotive Manufacturing: Precision guides for press tools building automotive parts, improving efficiency and reducing defects.
- General Toolmaking: Standardized components for press tools that are easy to source, replace, and integrate.
- Industrial Machinery Components: Guiding bars that support moving elements in heavy-duty presses and molding machines.
By adhering to ISO 16366:2008, manufacturers can achieve enhanced tool life, decrease maintenance costs, and ensure safety and reliability in pressing operations.
Related Standards
ISO 16366:2008 is part of a broader framework of standards relevant to press tooling and industrial manufacturing:
- ISO 2768-1: General tolerances for linear and angular dimensions without individual tolerance indications.
- ISO 4762: Specifications for hexagon socket head cap screws, which are often used to secure guiding bars.
- ISO 8733: Details on cylindrical dowel pins with threaded holes, components related to tool assembly.
- ISO 13715: Guidelines for finish and marking of edges, critical for ensuring component safety and functional performance.
- ISO 23480: Covers retaining plates in press tooling, complementing the application of L-shaped guiding bars.
Compliance with these standards alongside ISO 16366 supports a unified manufacturing ecosystem, fostering higher quality and compatibility across press tool components.
Keywords: ISO 16366:2008, L-shaped guiding bars, press tools, metal pressing, tooling standards, manufacturing tolerances, tool design, industrial press components, guiding bar dimensions, toolmaking standards.
Frequently Asked Questions
ISO 16366:2008 is a standard published by the International Organization for Standardization (ISO). Its full title is "Tools for pressing - L-shaped guides". This standard covers: ISO 16366:2008 specifies the main dimensions and tolerances of L-shaped guiding bars, to be used in press tools. It also specifies the designation of L-shaped guiding bars.
ISO 16366:2008 specifies the main dimensions and tolerances of L-shaped guiding bars, to be used in press tools. It also specifies the designation of L-shaped guiding bars.
ISO 16366:2008 is classified under the following ICS (International Classification for Standards) categories: 25.120.10 - Forging equipment. Presses. Shears. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 16366:2008 has the following relationships with other standards: It is inter standard links to ISO 16366:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 16366:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 16366
Second edition
2008-03-01
Tools for pressing — L-shaped guides
Outillage de presse — Glissières de guidage en L
Reference number
©
ISO 2008
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16366 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 8, Tools for
pressing and moulding.
This second edition cancels and replaces the first edition (ISO 163
...
NORME ISO
INTERNATIONALE 16366
Deuxième édition
2008-03-01
Outillage de presse — Glissières de
guidage en L
Tools for pressing — L-shaped guides
Numéro de référence
©
ISO 2008
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2008
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2008 – Tous droits réservés
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 16366 a été élaborée par le comité technique ISO/TC 29, Petit outillage, sous-comité SC 8, Outillage de
presse et de moulage.
Cette d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...