iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 7879:1983

(Main)

Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions

Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions

Véhicules routiers — Pompes d'injection en ligne avec fixation par berceau — Dimensions de montage

General Information

Status
Withdrawn
Publication Date
30-Nov-1983
Withdrawal Date
30-Nov-1983
ICS
43.060.40 - Fuel systems
Technical Committee
ISO/TC 22 - Road vehicles
Drafting Committee
ISO/TC 22 - Road vehicles
Current Stage
9599 - Withdrawal of International Standard
Completion Date
01-Apr-1990
Ref Project

Relations

Revised
ISO 7879:1990 - Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions
Effective Date
15-Apr-2008

Buy Standard

ISO 7879:1983 - Road vehicles -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensionsISO 7879:1983 - Road vehicles -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensions
PreviousNext
Standard
ISO 7879:1983 - Road vehicles -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensions
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 7879:1983 - Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions Released:12/1/1983ISO 7879:1983 - Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions Released:12/1/1983
PreviousNext
Standard
ISO 7879:1983 - Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions Released:12/1/1983
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard 7879
INTERNATIONAL ORGANIZATION FOR STANOARDIZATION*MEXflYHAPOjlHAfl OPrAHH3AUMA 00 CTAHjlAPT113AUMM*ORGANlSATlON INTERNATIONALE DE NORMALISATION
Road vehicles - Cradle-mounted in-line fuel injection
pumps - Mounting dimensions
Véhicules routiers - Pompes d'injection en ligne avec fixation par berceau - Dimensions de montage
First edition - 1983-12-15
UDC 621.43.038.5 Ref. No. IS0 7879-1983 (E)
Descriptors : road vehicles, pumps, injection pumps, fuels, dimensions, dimensional tolerances.
Price based on 3 pages

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
(IS0 member bodies). The work of developing International
national standards bodies
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
ISO, also take part in the work.
and non-governmental, in liaison with
Draft lnternational Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7879 was developed by Technical Committee ISO/TC 22,
Road vehicles, and was circulated to the member bodies in September 1982.
It has been approved by the member bodies of the following countries :
Austria
Hungary
Romania
Belgium
Iran Spain
Bulgaria Italy Sweden
China
Japan Switzerland
Czechosiova kia
Korea, Dem. P. Rep. of United Kingdom
Egypt, Arab Rep. of Netherlands
USA
France New Zealand USSR
Germany, F.R. Poland
No member body expressed disapproval of the document.
0 International Organization for Standardization, 1983 O
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 7879-1983 (E)
...

Norme internationale @ 7879
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION*MEX~YHAPO~HAR OPrAHMBAUHfl no CTAHAAPTM3AUMM*ORGANlSATlON INTERNATIONALE DE NORMALISATION
Véhicules routiers - Pompes d'injection en ligne avec
fixation par berceau - Dimensions de montage
Road vehicles - Cradle-mounted in-line fuel injection pumps - Mounting dimensions
Première édition - 1983-12-15
CDU 621 A3.038.5 Réf. no : IS0 7879-1983 (FI
Descripteurs : véhicule routier, pompe, pompe à injection, combustible, dimension, tolérance de dimension.
Prix basé sur 3 pages

---------------------- Page: 1 ----------------------
Avant-propos
I
L‘ISO (organisation internationale de normalisation) est une fédération mondiale
d‘organismes nationaux de normalisation (comités membres de I’ISO). L‘élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
le Conseil de I‘ISO.
nationales par
La Norme internationale IS0 7879 a été élaborée par le comité technique ISO/TC 22,
Véhicules routiers, et a été soumise aux comités membres en septembre 1982.
Les comités membres des pays suivants l’ont approuvée :
Allemagne, R.F. France Roumanie
Autriche Royaume- Uni
Hongrie
Belgique Iran Suède
Bulgarie Suisse
Italie
Tchécoslovaquie
Chine Japon
Corée, Rép. dém. p. de Nouvelle-Zélande URSS
Égypte, Rép. arabe d’ USA
Pays- Bas
Espagne Pologne
Aucun comité membre ne l’a désapprouvée.
O Organisation internationale de normalisation, 1983 O
Imprimé en Suisse

---------------------- Page: 2 ----------------------
IS0 7879-1983 (F)
NORM E I N TE R NAT1 O NALE
Véhicules routiers -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 15500-23:2023(Main)
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 23: Gas temperature sensor

This document specifies tests and requirements for gas-temperature sensors, a compressed natural gas (CNG) fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas in accordance with ISO 15403-1. It is not applicable to the following: a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer; b) fuel containers; c) stationary gas engines; d) container-mounting hardware; e) electronic fuel management; f) refuelling receptacles.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 15500-23:2023(Main)
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 23: Gas temperature sensor

This document specifies tests and requirements for gas-temperature sensors, a compressed natural gas (CNG) fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using natural gas in accordance with ISO 15403-1. It is not applicable to the following: a) liquefied natural gas (LNG) fuel system components located upstream of, and including, the vaporizer; b) fuel containers; c) stationary gas engines; d) container-mounting hardware; e) electronic fuel management; f) refuelling receptacles.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 20766-5:2023(Main)
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 5: Fuel selection system and electrical installations

This document specifies general requirements and definitions of liquefied petroleum gas fuel components (fuel selection system and electrical installations, intended for use on the types of motor vehicles as defined in ISO 3833). It also provides general design principles, and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to devices which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane rich at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).

  • Standard
    5 pages
    English language
    sale 15% off
ISO
ISO 12614-20:2023(Main)
Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 20: Flexible fuel or vent lines

This document specifies tests and requirements for the flexible fuel lines, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. NOTE 1 It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this document and tested according to the appropriate functional tests. NOTE 2 All references to pressure in this document are considered gauge pressures unless otherwise specified. NOTE 3 This document is based upon a working pressure for natural gas as a fuel of 1,6 MPa (16 bar). (1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.) Other working pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 2 MPa (20 bar) working pressure system will require pressures to be multiplied by 1,25.

  • Standard
    9 pages
    English language
    sale 15% off
ISO
ISO 6519:2023(Main)
Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs

This document specifies the dimensions of tapered shaft ends and hubs of fuel injection pumps and high-pressure supply pumps for diesel (compression-ignition) engines. The specified shaft ends and hubs can be used with or without keys. NOTE The specified shaft ends and hubs can also be used for other applications where no specific standards exist.

  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 23820:2023(Main)
Determination of the filtration efficiency of urea filter modules

This document specifies requirements relating to the testing method for AUS 32/diesel exhaust fluid (DEF) filters for the removal of suspended matter. This applies to urea filters dedicated to passenger vehicles as well as to commercial vehicles. This method applies to filters with flow rates from 3 l/h to 30 l/h depending on the application (by default 5 l/h for passenger vehicles and 25 l/h for commercial vehicles). This method can be used for other flow rates, provided the validation requirement can be met.

  • Standard
    21 pages
    English language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off
  • Draft
    21 pages
    English language
    sale 15% off
ISO
ISO 19438:2023(Main)
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity

This document specifies a multi-pass filtration test, with continuous contaminant injection and using the on line particle counting method, to evaluate the performance of diesel fuel and petrol filters for internal combustion engines submitted to a constant flow rate of test liquid. The test procedure determines the contaminant capacity of a filter, its particulate removal characteristics and differential pressure. This document is applicable to filter elements having a rated flow between 50 l/h and 800 l/h; however, by agreement between the filter manufacturer and customer, and with some modifications, the procedure is permitted for application to fuel filters with higher flow rates.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 20766-21:2023(Main)
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 21: Pressure and/or temperature sensors

This document specifies general requirements for the pressure and/or temperature sensors liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to device which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane rich at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 20766-7:2023(Main)
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 7: Remotely controlled service valve with excess flow valve

This document specifies general requirements and definitions of the liquefied petroleum gas fuel component: remotely controlled service valve with excess flow valve. This component is intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to device which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane rich at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
ISO
ISO 20766-8:2023(Main)
Road vehicles — Liquefied petroleum gas (LPG) fuel system components — Part 8: Fuel pump

This document specifies general requirements for the fuel pump component of liquefied petroleum gas fuel, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking. This document is applicable to vehicles (mono-fuel, bi-fuel or dual-fuel applications) using gaseous fuels in accordance with ISO 9162. It is not applicable to the following: a) fuel containers; b) stationary gas engines; c) container mounting hardware; d) electronic fuel management; e) refuelling receptacles. It is recognized that miscellaneous components not specifically addressed herein can be examined for compliance with the criteria of any applicable part of the ISO 20766 series, including testing to the appropriate functional tests. All references to pressure in this document are considered gauge pressures unless otherwise specified. This document applies to device which have a service pressure in the range of 110 kPa (butane rich at 20 °C) and 840 kPa (propane rich at 20 °C), hereinafter referred to in this document. Other service pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio).

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off